-
Rimage 110716-000 - page 1
Desktop User Guide Includes Liberty Printer 110716-000 Revision H Use this manual to help you : • Identify autoloader an d printer parts • Configure the Liberty prin ter driver ...
-
Rimage 110716-000 - page 2
Desktop 1500 Autoloader – Model RAS12 Desktop 4500 Autoloader – Model RAS13 Notice for USA Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer ence, and (2) this device must accept any ...
-
Rimage 110716-000 - page 3
Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 FAX: (952) 946-6956 Service: (952) 946-0004 (Asia/Paci fic · Mexico/Latin America) (800) 553-8312 (North America) email: support@rimage.com Rimage Technical Website: http://www.rimage.com/technical/ Rimage Europe GmbH Hans-Böckler-Straße 7 63128 Dietzenbach, Germany Tel: +49-( ...
-
Rimage 110716-000 - page 4
LIMITED 1-Year Warranty Rimage warrants, to the original end user only , that all non-consumable parts of the Rimage Desktop autoloader products will be free from defects in material and workmanship for 12 months, according to the following terms: • Rimage will replace or repair, at Rimage's discretion, any non-consumable parts found defecti ...
-
Rimage 110716-000 - page 5
Table of Contents CD and DVD Recording Software Dis c laimer .................................................................... vi Safety Prec autions ............................................................................................................. .. vi Chapter 1 – Ov erview and Contents -------------------------------------------- ...
-
Rimage 110716-000 - page 6
CD and DVD Recording Software Disclaimer This Product, Software, or Documentation may be designed to assi st you in reproducing material in which you own the copyright or h ave obtaine d permission to copy from the copyright owner. Unless you own the copyright or have permi ssion to copy from the copyright owner, you may be violating copyright law ...
-
Rimage 110716-000 - page 7
Chapter 1 – Overview and Contents Overview This manual provides the information needed to identify the parts of the autoloader, and configure the Liberty printer driver. The Desktop au toloader consists of recorders, a p rinter, and an autoloader for transferring discs. The Desktop autoloader and Rimage OfficeNet Software runs only on Windows 200 ...
-
Rimage 110716-000 - page 8
Chapter 2 – User Guide Desktop Autoloader Parts This section describes the Desktop hardware an d its features. The Desktop autoloaders have several major functional parts as shown below: Front View 1 – Liberty Printer 5 – Printer Tray Door 9 – Output Spindle 2 – Picker 6 – Recorder 10 – Carousel 3 – Printer Top Cover 7 – Operator ...
-
Rimage 110716-000 - page 9
Power LED The green power LED lights when the power switch is on. Active LED The yellow active LED lights when there is communication through the co ntrol port. Mode LED The mode LED lights when the button diagnostic function is selected. Button LED The yellow button LED, located in the operator butt on, is lit whe n the autoloade r is paused. I t ...
-
Rimage 110716-000 - page 10
Liberty Operator Panel The Liberty printer operator panel has three buttons and four L EDs to indicate certain conditions. 1 – Cancel Button 3 – Disc Button and LED 2 – Ink Cartridge Status LED 4 – Power Button and LED Cancel Button : Not used. Ink Cartridge Status LED : Flashes when an ink cartridge is low on ink, incorrectly installed, or ...
-
Rimage 110716-000 - page 11
Ink Cartridge Status When the top cover is open, the ink cart ridge cradle moves so that its arrow 6 points to one of the ink cartridge status indicators, indica ting the cartridge status as shown below. 1 – Color Ink Cartridge Trouble 4 – Black Ink Cartridge Low 2 – Black Ink Cartridge Trouble 5 – Ink Cartridges Normal 3 – Color Ink Cart ...
-
Rimage 110716-000 - page 12
4. Select the Adva nced tab. 5. Select the Align Cartridges button. If the buttons are grayed out, the tray controller must be started. For Windows 2000, s elect Windows’ Start|Programs|Rimage|Utilit ies|Disc Color Tray Controll er to start the Rimage Tray Controller. For Windows XP, select Windows’ Start|All Programs|Rimag e|Utilities|Disc Col ...
-
Rimage 110716-000 - page 13
8. When prompted, press the Disc button on th e printer to close the tray and start the printing test. 9. There are four pattern groups (A, B, C, D) printed on the disc. E ach group has a numbered index, shown as a set of numbers fr om 1 to 21. Locate the two lines that make the straightest line and enter the matching in dex value for each lettered ...
-
Rimage 110716-000 - page 14
11. When prompted, press the Disc button to prin t the following test pattern on a disc. 12. The black and magenta lines should be straight as shown above. If they are not inline with each other, repeat the alignmen t process starting at step 5. 13. Close the Align Cartridges window. 14. Close the Printing Preference window. 15. Press the Disc butt ...
-
Rimage 110716-000 - page 15
Label Design Requirements This section provides some things you need to co nsider before yo u create a label. Your first consideration is the media you will use. Select media that has an ink printable surface. The OfficeNet software comes with a label editor called “CD Designer” which is installed on your system. Use CD Designer to design your ...
-
Rimage 110716-000 - page 16
Change Printer Driver Settings You can change the printer driver properties to select print quality, print orie ntation, ink volume, or other image adjustments. 1. On the Start menu, point to Settings , and then click Printers . 2. Right-click the printer yo u want to change on the shortc ut menu, and then left-click Printing Preferences . The Libe ...
-
Rimage 110716-000 - page 17
4. Select the Featu res tab. 5. Select Advanced Features to open the Advanced Features dialog. 6. Adjust the Ink Volume if desired. Drag the slider to the left for lig hter images (less ink) or to the right for denser images (more ink). Select OK when done. The Dry Time and Low Memory Mode selections are not used. 17 ...
-
Rimage 110716-000 - page 18
7. Adjust the Color tab settings ( Print in Grayscale , S aturation , Brightness , and Color Tone ) as needed. • • • • • Print in Grayscale print colors as various shades of gray. o High Quality uses the tri-color ink cartridge to print high quality grayscale images. o Black Only uses the black ink cartridg e to print in grayscale. o Opti ...
-
Rimage 110716-000 - page 19
Advanced Tab The Advanced tab provides access to diagnosti c functions, alignments, and a flash update function. The Advanced tab also displays Liberty status information, including Driver, Printer, TCH, Loader, and Status information. Driver - displays the installed Liberty Printer Driver version number. Printer - displays the port number, serial ...
-
Rimage 110716-000 - page 20
Printing The Printing section allows you to run a test print without running the complete system. A print file (.prn) must be created prior to running thi s operation. 1. At the Printing Preferences dialog, click the Advanced tab to open the following dialog. 2. Select the Print File button and select a pre-rendered file to print for print testing ...
-
Rimage 110716-000 - page 21
Run Masker When selected, the Rimage Raster Masker disp lays allowing you to adjust the mask (non- printable area) settings for the selected media type ( Standard CD/DVD 120 mm on ly). This works well when printing rectangle or square pictures on the disc and you do not want the edges printed. If you print on the edges of a di sc where there is not ...
-
Rimage 110716-000 - page 22
Center Image This function is used only when the p rinted image is not centered on the disc. 1. Stop all orders from processing. You can pr ess the operator button on the Desktop autoloader or pause orders from the Production Se rver software. 2. Select the windows Start menu and select | Settings|Printers |. 3. Right-click on Disc Color Printer an ...
-
Rimage 110716-000 - page 23
8. When it has finished printing, rotate the di sc 180 degrees. Align three of the Position Lines, located on the outer edges of the disc, to the Tray Bracket Edge as shown here. 1 – Position Lines 2, 3, 4 – Tray Bracket Edge 9. Select the Print Test Pattern button again. 10. When prompted, p ress the Disc button to close the printer tray. 11. ...
-
Rimage 110716-000 - page 24
12. Look at where each long line crosses the set of index lines. 13. Enter the decimal index value where the long line crosses the index line in the Horizontal and Vertical group. Enter negative numbers with a ne gative character (-). Each line has a value of 0.5 units. The Horizontal value from above would be about –1.2. 14. Select the Save Sett ...
-
Rimage 110716-000 - page 25
Diagnostics At the Advanced tab under Maintenance , the Diagnostics dialog provides several device tests. Mech Select Power Off and Power On to cycle power to th e tray mechanism. Select the Power ON button to resume o peration. Cartridges Select the Validate button to verify if the ink cartridges are authentic ink cartridges. Select the Test butto ...
-
Rimage 110716-000 - page 26
6. Select the location of the flash file from the Rimage OfficeNet Software Suite disc or the saved location if it was downloaded from the website. 7. Double-click the filename name .bin file. 8. The updating procedure runs until the flash file is updated to the autoloader. A dialog box appears that it completed the flash update. Clean Cartridges T ...
-
Rimage 110716-000 - page 27
Tray Controller The Rimage Tray Controll er icon ( ) is installed in the Windows Icon Tray once it was initiated. The tray controller must be running f or the printer to function. The Tray Controller application automatically ru ns in the background after the Production Server starts. The Tray Controller is only availa ble if the Liberty Printer Dr ...
-
Rimage 110716-000 - page 28
6. Select the windows Start menu and select |Programs|Rimage|Utilities| a nd select Disc Color Printer Tray Controller . 7. After the tray controller has completed the init ialization, try opening the printer tray again by pressing the disc button. 28 ...
-
Rimage 110716-000 - page 29
Find Additional Information Each software module con tains online Help. Help features a Table of Contents pane o n the left side of the window and the selected topic on the right. You may need to resize the windows to fit your screen. Locate your printed Software Suite 6 Getting Started Guide for a short t utorial on creating your first disc. Onlin ...
¿Tienes una pregunta acerca de Rimage 110716-000?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Rimage 110716-000, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Rimage 110716-000 probablemente compartirá una forma de solucionarlo.