-
POSline SM2410 - page 1
Manual del Usuario SM2410 ESPECIFICACIONES SUJET AS A CAMBIO SIN PREVIO AVISO . ...
-
POSline SM2410 - page 2
i No warranty of any kind is made in regard to this material, including, but not limited to, impl ied warranties of mechantability or fitness for a particular purpose. W e are not liable for an y errors con- tained herein nor incidental or consequential damages in connection with furnishing, performance or use of this material. No part of this docu ...
-
POSline SM2410 - page 3
ii **Move the device away from the receiver . **Plug the device into a different outlet so that the device and the receiver are on different branch circuits. If necessary the user may consul t the manufacture r , an authorized dealer , or experienced radio/televi sion technician for additional sug- gestions. The user may find the following booklet ...
-
POSline SM2410 - page 4
iii Laser Safety The Omnidirectional Laser Scan Mo dul e complies with safety stand- ard IEC 60825 for a Class I laser product. It also complies with CDRH as applicable to a Class IIa laser product. Avoid long term starting into direct laser light. Radiant Energy : The Omnidirectional Las er Scan Module uses one low-power visible laser diode operat ...
-
POSline SM2410 - page 5
iv T able of Cont ent s Intro duction.................... .............. ............ 1 Unp acking........ .............. ......................... .. 1 Fin d ing Y our W ay Around............ ........... 2 Conn ecting and Mounting........ .............. . 3 Power ...................... .............. .............. .. 3 V erifying Scanner Operatio ...
-
POSline SM2410 - page 6
1 I n t r o d u c t i o n This Omnidirectional Laser Scan Module i s an easy-to-inter- grate unit th at performs 5 dire ctions of scan field with a 20- line scan pattern cycling at 1200 scan per second for quick accurate reads. The scanner ’s smart small cubic design allows for easy integration into new equipment and efficiently reduces overall e ...
-
POSline SM2410 - page 7
2 F i n d i n g You r Wa y A r o u n d Front View Back View Bo ttom View ...
-
POSline SM2410 - page 8
3 C o n n e c t i n g a n d M o u n t i n g Power The scanner needs a minimum of 200mA at 5V power . The power link interfa ce cable t hat comes with the scanner sup- ports both direct power (where the scanner takes power from the host machine) and ex ternal power (the power adapter that's plugged into an AC outlet). If the host machine sup- p ...
-
POSline SM2410 - page 9
4 4. When the scanner powers up, LED light up in gr een and the buzzer makes fo ur short beep sounds. When the self-test is finished the LED light will turn red. 5. Place the "test barcode" in front of the scanner . If the scanner works right, it will make a short beep sound, and the LED will show green light in dicating a good read, then ...
-
POSline SM2410 - page 10
5 Back View Bottom View Unit: mm (inch) *** SR (strain release) that is connected to the cable rotates 90 o to comply with the way the scanner is mounted. Therefore the sca nner will be positioned horizontally to the host machine without cable inter- ference for optimal mounting. (See pictures below). Horizontal Mounting V ertical Mounting ...
-
POSline SM2410 - page 11
6 Connecting to the Host The scanner connects to a host terminal by an interface cable. This cable connects to the scanner w ith a modular connector , and con nects to the host terminal wi th the con- nector required by the host (RS-232, keyboard wedge, or USB. Different connectors us ed depending on the h ost.) Please make sure the right ca ble is ...
-
POSline SM2410 - page 12
7 Set Up 1. With the scann er running (LED red) and the host sys- tem on, scan <Enter/Exit Pro gramming Mode> bar- code found on the insid e cover of the Programmi ng Guide. 2. Scanner is re ady for programming if it gives one low beep sound followed immedia tely by a high beep sound and LED turn s green. 3. Find the barcode which correspon d ...
-
POSline SM2410 - page 13
8 LED indications LED S tatus Indications off no power applied to the scanner steady red light the scanner is on and ready to scan one blink of green light one barcode has been succesfu lly decoded steady green light *scanner is in programming mode, *a barcode has been successfully decoded but the object has not been removed from the scan win- dow ...
-
POSline SM2410 - page 14
9 Beeps Changing Beep Volume The scanner can be progra mmed with the Programming Guide to change beeper tone, volume and peri od. The default beep vol ume is loud. There are three sound levels: loud, medium, and low . Sleep Mode After the scanner has been inactive for a period of time, the laser automati cally turns off; after some more time, the m ...
-
POSline SM2410 - page 15
10 Controlling the Sca nner from a Host System The scanner can be controlled fro m the host system via the RS-232C interface. Control can be accomplished by trans- mitting the following si ngle-byte commands to the scanner . The default setting for the commans are as follows: Note: When the sca nner is disabled, the motor of the scan- ner will stay ...
-
POSline SM2410 - page 16
11 Sp e c i f i c a t i o n s Operational Light source 650nm visible laser diode Depth of Scan Field 0-210mm@ UPC/EAN 100%, PCS 90% Number of Scan Lines 20 Scan Pattern 5 directions of scan field Scan S peed 1200 scan per second Minimum Bar Width 5mil @ PCS 90% Print Contrast 30% @ UPC/EAN100% Indicators (LED) two-color LED (red and green) Decode C ...
-
POSline SM2410 - page 17
12 Power Input V oltage 5VDC+10% Power 1.0W atts Operating Current 200mA@ 5.0V Laser Class CDRH Class IIa, IEC 60825-1: Class 1 EMC CE&FCC DOC compliance Environment Operating T emperature 0 o C-40 o C S torage T emperature -20 o C-60 o C Humidity 5%-95% RH (non-condensing) Light Level max. 2500LUX (fluorescent) Shock Designed to withstand 1m d ...
-
POSline SM2410 - page 18
13 D i m e n s i o n s ...
-
POSline SM2410 - page 19
14 Scan Field DEPTH OF FIELD 13 mil (0.33mm) 100% UPC/EAN 5.90 in. 7.87 200.0 30 3.90 150.0 100.0 1.97 50.0 0 7.5 mil (0.19mm) 14 6 mil (0.15mm) 11.5 4.0 4.5 5 mil (0.127mm) 10 5.5 WIDTH OF FIEL D 0 0 11.81 300.0 250.0 9.84 10 mil (0.25mm) 20 0 0 21 26 mil (0.66mm) 0 50.0 100.0 116.4 50.0 100.0 116.4 0 1.97 4.58 3.94 1.97 3.94 4.58 mm in. mm ...
-
POSline SM2410 - page 20
15 Tro u b l e s h o o t i n g Problem Diagnostic Tips The scanner is on but cannot read bar- codes. The LED is red. *The scanner window is dirty and must be cleaned as described in Maintenance section. *The presented barcode typ e is not enabled and must b e programmed with the programming g uide *The host disables the scan ner. *The barcode type ...
-
POSline SM2410 - page 21
16 LED remains green . *The scanner is continuously seein g a barcode. Remove al l barcode la- bels out of the scan volume of the scanner and try again. *The scanner cannot se nd data to the host system. T here is no proper handshaking between the scanner and the host. Make sure that all ca- bles are connected and your host system is ready to recei ...
-
POSline SM2410 - page 22
Notes ...
-
POSline SM2410 - page 23
Notes ...
-
POSline SM2410 - page 24
Scale 1:1 Unit: mm Note: 3 Mo unting Holes; size- M3* 0.5, Depth=5.0 Figure 1: Mounting Plate Boring T emplate- Back View ...
-
POSline SM2410 - page 25
...
-
POSline SM2410 - page 26
Scale 1:1 Unit: mm Note: 2 Mounting Holes; size- M3 *0.5, Depth=4.5 Figure 2: Mounting Plate Boring T emplate- Bottom Vi ew ...
¿Tienes una pregunta acerca de POSline SM2410?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con POSline SM2410, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con POSline SM2410 probablemente compartirá una forma de solucionarlo.