-
REI MDC-900 - page 1
Version 4 27 Feb 08 MDC-900 MDC-2100 OWNER’S GUIDE RESEARCH ELECTRONICS INTERNATIONAL 455 Security Drive Algood, TN 38506 U.S.A. +1 931-537-6032 http://www.reiusa.net/ REI MDC-2100/MDC-900 1 ...
-
REI MDC-900 - page 2
Version 4 27 Feb 08 T ABLE of CONTENTS TABLE OF CONTENTS .................................................................................................... 2 TABLE OF FIGURES ........................................................................................................ 2 INTRODUCTION ..................................................... ...
-
REI MDC-900 - page 3
Version 4 27 Feb 08 INTRODUCTION The OSCOR Microwave Downconverter option (MDC-2100) expands the OSCOR ’s frequency range limit to 21GHz. The MDC-900 extends the OSCOR ’ s range to 9GHz . Note: General descriptions of the MDC-2100 in this guide may not always include exceptions for the MDC-900, which does not cover the 9 to 21GHz spans. Microwa ...
-
REI MDC-900 - page 4
Version 4 27 Feb 08 3 6 9 1 2 1 5 18 21 0 1.5 All N um b ers in G Hz . Antennas 3-9* 9-15 15-21 4.5 7.5 1 0 .5 13 .5 1 6.5 19 .5 MDC- 900 onl y *The MDC-900 only c over s the b and 1 fr eque ncy r ange . Figure 2: ILLUSTRATION OF THE MDC-2100 DOWNCONVE RSION PROCESS The OSCOR (version 5.0) displays up to six 1.5GHz (1500MHz) windows simultaneously, ...
-
REI MDC-900 - page 5
Version 4 27 Feb 08 Inst alling the MDC-2100/MDC-900 In order to use the MDC with the OSCOR, a special connector (the OEP-2100) must be installed in the connector tray of the OSCOR. This connect or should be installed permanently into the connector tray and provides for easy connection of the MDC while not affecting the OSCOR normal operation. Note ...
-
REI MDC-900 - page 6
Version 4 27 Feb 08 Operational Control of the MDC-2100/MDC-900 OSCOR Version 4.0 Operational control of the MDC-2100 is provided by the OSCOR keypad using the normal OSCOR functional control. For example, in the OSCOR SWEEP or ANALYZE modes, pressing the F1 button will toggle through all of the OSCOR inputs including the MDC- 2100 frequency bands. ...
-
REI MDC-900 - page 7
Version 4 27 Feb 08 o You can choose to begin with MDCB-all if you wish. You must view both MDCA- all and MDCB-all to see the entire spectrum. • Set the span to 1.5GHz, if necessary. If a smaller span init ially displays, press SWEEP/ANALYZE (CONTROL area) to select SWEEP . Press SHIFT (DATA FUNCTIONS area) and EXPAND (CONTROL area). • Notice a ...
-
REI MDC-900 - page 8
Version 4 27 Feb 08 Figure 6A: ANALYZING AN MD C SIGNAL (OS COR 4.0) Figure 6B: ANALYZING AN MD C SIGNAL (OS COR 5.0) FIGURE 7: USING “IDENTIFY” TO VERIFY A SIGNAL (OSCOR 5.0) OSCOR Sweep and Analyze Modes w ith the MDC In the Sweep mode, the cursor frequency is no longer representative of a single frequency because of the folding principle des ...
-
REI MDC-900 - page 9
Version 4 27 Feb 08 the F4 button to further analyze the signal, it is possible t o analyze which antenna and filter that is actually receiving the signal. Figure 9 shows the proper antenna selected and the proper filter selected which corrects the signal shape. Furthermore, the unusual signal shape of Figure 8 indicates that this signal should be ...
-
REI MDC-900 - page 10
Version 4 27 Feb 08 Figure 9: SELECTING THE PROPER M DC BAND AND FILTER (OSCO R 4.0) Storing a Sweep Span with the MDC Since the MDC down-conversion process displays multiple frequency bands at once, the easiest way to quickly view a specific frequency span is to type in a desired center frequency and then use the EXPAND and NARROW keys to adjust t ...
-
REI MDC-900 - page 11
Version 4 27 Feb 08 includes the desired frequency span. The table below provides some examples and recommended search span for speed and accuracy. Example of a Desired Frequency Span: Recommended Implementation: 4 – 6GHz 3 – 9GHz (MDCA-1 & MDCB-1/OSCOR 5.0) 6 – 8GHz 3 – 9GHz (MDCA-1 & MDCB-1/OSCOR 5.0) 5.7 – 5.9GHz 5.8 GHz, 250MH ...
-
REI MDC-900 - page 12
Version 4 27 Feb 08 Microwave T r ansmission Considerations for the MDC There are important principles and considerations to understand when dealing with microwave frequency radiators. • As the frequency increases, the penetration of RF signals through buildin g materials, foliage, etc. decreases rapidly. Therefore, microwave signals are consider ...
-
REI MDC-900 - page 13
Version 4 27 Feb 08 it is absolutely necessary in order to save time. A good rule of thumb is to assume that the MDC has an antenna pattern that is about 100 degrees wide. In other words, it is necessary to point the MDC in at least 4 different directions around the room to cover the perimeter. Also, the MDC should be pointed up and possibly moved ...
-
REI MDC-900 - page 14
Version 4 27 Feb 08 Using the MTU-2100 Microwave T est Unit The MTU-2100 is designed to provide a simple test to verify that the MDC is working properly. When the button is pressed on the MTU, low power signals are generated at about 5.9, 11.8, and 17.7GHz for 3 minutes. Each transmitted signal contains a modulated tone between 900Hz and 1KHz to ve ...
-
REI MDC-900 - page 15
Version 4 27 Feb 08 MDC-2100/MDC-900 SPECIFICA TIONS Specifications M DC-2100 MDC-900 Frequency Range: 3-21GHz 3-9GHz Conversion output: 5MHz to 3005MHz 5MHz to 3005MHz Frequency Bands of Operation: Band 1: 3-9GHz Band 1: 3-9GHz Band 2: 9-15GHz Band 3: 15-21GHz Show All: 3-21GHz Antenna Gain: Band 1: 10 dB Band 1: 10 dB Band 2: 9 dB Band 3: 9 dB MD ...
-
REI MDC-900 - page 16
Version 4 27 Feb 08 REI MDC-2100/MDC-900 16 Technical Bulletin 24 April 2002 For the MDC-900 and MDC-2100 This bulletin describes a calibration process to ensure the maximum technical performance for the MDC unit. Technical Background: Most Down-converter products contain a local oscillator (LO) reference signal that is utilized in the down-convers ...
¿Tienes una pregunta acerca de REI MDC-900?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con REI MDC-900, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con REI MDC-900 probablemente compartirá una forma de solucionarlo.