-
Connect Tech BlueStorm Universal PCI - page 1
BlueStorm Univer sal PCI User Manual Contact Information: Connect Tech Inc. 42 Arrow Road Guelph, Ontario, Canada N1K 1S6 Tel: 519-836-1291 (International) 800-426-8979 (Canada & USA) Fax: 519-836-4878 Email: sales@connecttech.com support@connecttech.com URL: www.connecttech.com CTIM-00015 Revis ion 0.10 June 4,, 2008 ...
-
Connect Tech BlueStorm Universal PCI - page 2
BlueStorm I nstallation Guide, Conne ct Tech Inc. 2 Revision 0.10 Limited Lifetime Warranty Connect Tec h Inc. provides a lifetime warranty for all * Connect Tech Inc. products. Shoul d this product, in Con nect Tech Inc.'s opinion, fail to be in good working order during the warra nty period, Connect Tech Inc. will, at its op tion, repair or ...
-
Connect Tech BlueStorm Universal PCI - page 3
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 3 Table of Contents Limite d Lifetime Warranty .............................................................................................................................. 2 Copyrig ht Notice............................................................................................. ...
-
Connect Tech BlueStorm Universal PCI - page 4
BlueStorm I nstallation Guide, Conne ct Tech Inc. 4 Revision 0.10 List of Tables Table 1: DB -25 Male Pinouts for B lueStorm/LP (2 Port Co nnector) ........................................................... 13 Table 2: HDB -44 Pinouts for BlueStor m/LP (4 Port Connecto r) ................................................................. 14 Table 3 ...
-
Connect Tech BlueStorm Universal PCI - page 5
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 5 Customer Suppo rt Overvie w If you experience dif ficulties after read ing the manual and/or using the product, co ntact the Connect Tec h Inc. reseller from which you purc hased the pro duct. In most cases the resell er can help you with pro duct installation and diffic ulties. In t ...
-
Connect Tech BlueStorm Universal PCI - page 6
BlueStorm I nstallation Guide, Conne ct Tech Inc. 6 Revision 0.10 Introduction Connect Tec h Inc. presents BlueStor m /LP/SP/SP Opto and SP RJ-11 . These high-speed multi- port co mmuni catio n adapters are designed for Low Profile (LP) and Standard Profile (SP) PCI compatible computers. BlueStorm cards p rovide you with u p to eight high perfor ma ...
-
Connect Tech BlueStorm Universal PCI - page 7
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 7 BlueStorm Insta llation Overvie w There ar e three stages to installing y our B lueStorm card: 1. Hard w are Configuration Interrupts and Me mory selection will be set by the host com puter’s BIOS and o perating system. This section o utlines jumper settin gs and configuratio n. 2. ...
-
Connect Tech BlueStorm Universal PCI - page 8
BlueStorm I nstallation Guide, Conne ct Tech Inc. 8 Revision 0.10 Multi-drop Slav e Mode In this mode the T xD+/- line driver is enabled only when data is transmitted and RxD+/ - is enabled at all ti m e s. This mode is typically used in multi-dr op 4-wire connection s. This mode requires software se tup in Control Panel – System Properties – H ...
-
Connect Tech BlueStorm Universal PCI - page 9
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 9 Figure 1: BlueStorm /LP Jumper Block Locations (2 Po rt Models) Figure 2: BlueStorm /LP Jumper Block Locations (4 Po rt Models) Figure 3: BlueStorm /LP Jumper Block Locations (8 Po rt Models) • • • • • • • • • • • • Jx1 Jx2 Jx3 Jx4 Jx5 Jx6 ...
-
Connect Tech BlueStorm Universal PCI - page 10
BlueStorm I nstallation Guide, Conne ct Tech Inc. 10 Revision 0.10 Figure 4: BlueStorm /SP Jumper Block Locations (8 Port Models) Figure 5: BlueStorm /SP Opto J u m per Block Locations ( 4 Port Models) • • • • • • • • • • • • • • • • • • • • • • • • Jx1 Jx2 Jx3 Jx4 Jx5 Jx6 Jx • • • • • • ? ...
-
Connect Tech BlueStorm Universal PCI - page 11
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 11 )Figure 6: BlueSto rm/SP RJ-11 (8 Port Model) Note: Refer to Table 8 for port 7 and port 8 pinouts. Jumper Configura tion for BlueStor m Jumper configuratio n options will vary by model. BlueStorm/LP RS-422/485 cards feature the jumper la y out listed in Figure 7 , while BlueStorm/S ...
-
Connect Tech BlueStorm Universal PCI - page 12
BlueStorm I nstallation Guide, Conne ct Tech Inc. 12 Revision 0.10 Figure 9 illustrates t he jumper co nfigurations for selecting +5V power or +12 V power. Figure 7: Jum per Configuration Exa mple for 4 Port RS-422/485 BlueStorm/LP Models Figure 8: Jum per Configuration Exa mple for BlueStorm /SP Opto Mode ls Figure 9: Jum per Configuration Exa mpl ...
-
Connect Tech BlueStorm Universal PCI - page 13
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 13 the operating s ystem is booted by the curren t driver/software RS-485 mode. T he jumper is used to ensure that a po rt will power-on tri-stated . For example, the RS -485 mode selection i n the Windows control panel will override this jumper setting once a port is opened. The BlueS ...
-
Connect Tech BlueStorm Universal PCI - page 14
BlueStorm I nstallation Guide, Conne ct Tech Inc. 14 Revision 0.10 19 2 DTR output RXD- input 20 1 DTR output RXD- input 21 NC no connect NC no connect 22 1 RI input CTS+ input 23 2 RI input CTS+ input 24 NC no connect NC no connect 25 2 DCD input RXD+ input Cable CBG002 sends the signals to two DB-9 male connectors. See Table 6 for pinout details. ...
-
Connect Tech BlueStorm Universal PCI - page 15
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 15 38 NC no connect NC no connect 39 3 DSR input CT S- input 40 3 DTR output RXD- input 41 3 RI input CT S+ input 42 4 DSR input CT S- input 43 4 DTR output RXD- input 44 4 RI input CT S+ input Cable CBG003 sends the signals to four DB-9 male connectors. Cable CBG007 sends the signals ...
-
Connect Tech BlueStorm Universal PCI - page 16
BlueStorm I nstallation Guide, Conne ct Tech Inc. 16 Revision 0.10 Table 3 : VHDCI-68 Female Pinouts for Bl ueStorm/LP (8 Port Connector) Pin No. Port No. RS-23 2 Signal Signal Direction RS-422/4 85 Signal Signal Direction 1 1 TXD output TXD- output 2 1 RI input CTS+ input 3 1 DCD input RXD+ input 4 1 DTR output RXD- input 5 1 RTS output RT S- outp ...
-
Connect Tech BlueStorm Universal PCI - page 17
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 17 Table 3 : VHDCI-68 Female Pinouts for Bl ueStorm/LP (Continued ) Pin No. Port No. RS-232 Signal Signal Direction RS-422/4 85 Signal Signal Direction 47 6 RTS output RTS- output 48 6 DSR input CTS- input 49 6 RXD input T XD+ output 50 6 CTS input RTS+ output 51 5, 6 SG signal gnd. SR ...
-
Connect Tech BlueStorm Universal PCI - page 18
BlueStorm I nstallation Guide, Conne ct Tech Inc. 18 Revision 0.10 Table 4 : HDB-78 Pinouts for BlueSto rm/SP (8 Port Conne ctor) Pin No. Port No. RS- 232 Signal Signal Direction RS-422/4 8 5 Signal Signal Direction 1 5 RT S output RTS A(-) output 2 5 CT S input RTS B(+) output 3 5 DSR input CTS A(-) input 4 5 RI input CTS B( +) input 5 5 SG signal ...
-
Connect Tech BlueStorm Universal PCI - page 19
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 19 Table 4 : HDB-78 Pinouts for BlueSto rm/SP (Continued) Pin No. Port No. RS- 232 Signal Signal Direction RS-422/4 8 5 Signal Signal Direction 40 1 RTS output RTS A(-) output 41 1 CTS input RTS B( +) output 42 1 DSR input CTS A(-) input 43 1 RI input CTS B( +) input 44 1 SG signal gnd ...
-
Connect Tech BlueStorm Universal PCI - page 20
BlueStorm I nstallation Guide, Conne ct Tech Inc. 20 Revision 0.10 Table 5 : RJ-45 Pinouts for BlueStorm /SP Opto (4 Port Connector) Pin No. RS-232 Signal Direction RS-422/485 Signal Direction 1 N/C no connect RTS (-) o utput 2 N/C input RxD (+) input 3 RTS output RTS (+) output 4 SG signal gnd SR signal ref. 5 TxD output TxD (+) output 6 RxD in pu ...
-
Connect Tech BlueStorm Universal PCI - page 21
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 21 Table 6 : Pinouts and Control Signals f or DB-9 and DB-2 5 Male Connectors (BlueSto rm/LP and BlueStorm/SP Only) Pin # RS-232 RS-422/4 85 DB-9 DB-2 5 Signal Signal Direction Signal Signal Direction 1 8 DCD input RxD + input 2 3 RxD input T xD + output 3 2 TxD output TxD – output 4 ...
-
Connect Tech BlueStorm Universal PCI - page 22
BlueStorm I nstallation Guide, Conne ct Tech Inc. 22 Revision 0.10 Table 8 : RJ-11 Pinouts for BlueStorm /SP RJ-11 ( Ports 7 and 8 Only) Pin No. RS-232 Direction 1 DCD input 2 DSR input 3 RxD input 4 RTS o utput 5 TxD o utput 6 CTS in put 7 DTR output 8 RI input 9 SG signal gnd . 10 N/C no connect 4 6 8 10 9 7 5 3 2 1 P7/P8 Please note that ports 7 ...
-
Connect Tech BlueStorm Universal PCI - page 23
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 23 Figure 10: BlueSto rm External I/O Box Diagram External I/O Box (part number : IOBG08BLV1) Male DB-9 conne ctors Mounting bracke t VHDCI-68 conne ctor Note: View VHDCI-68 connector pinouts in Table 3 . I/O box IOBG08BLV1 will send the signals to eight DB-9 male connectors. See Table ...
-
Connect Tech BlueStorm Universal PCI - page 24
BlueStorm I nstallation Guide, Conne ct Tech Inc. 24 Revision 0.10 Figure 11: RS-42 2/485 Wiring Dia grams (BlueStorm/LP and BlueStorm/SP Only) RTS + RTS - CTS + CTS - TxD + TxD - RxD + RxD - RxD + TxD + RxD - TxD - RTS - CTS - RTS + CTS + SR SR BlueStorm/ SP Opto Adapter RS - 485/422 Peripheral 3 1 4 2 5 6 9 7 8 RTS + RTS - CTS + CTS - TxD + TxD - ...
-
Connect Tech BlueStorm Universal PCI - page 25
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 25 Hardware Instal lation Turn the po w er o ff to your computer a nd open it to expo se the expansion slots (cons ult your system’s docu m e ntation for more infor mation about this proce dure). Choose a n available PCI expansio n slot, remove the e xpansion slot cover and insert th ...
-
Connect Tech BlueStorm Universal PCI - page 26
BlueStorm I nstallation Guide, Conne ct Tech Inc. 26 Revision 0.10 UARTs BlueStorm/LP (2 por t m od els) ■ 17D152 dual UART with 64 byte TxD/RxD FIFO b uffers BlueStor m/LP (4 port m ode ls) ■ 17D154 quad UART with 64 byte TxD/RxD FI FO buffers BlueStorm/LP ( 8 port models) ■ 17D158 octal UART with 64 byte TxD/RxD FI FO buffers BlueStorm/SP a ...
-
Connect Tech BlueStorm Universal PCI - page 27
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 27 Certification Connect Tec h Inc. declares that the pr oduct(s) covered b y t he contents of this manual have been tested and found co mpliant with the belo w listed standards as r equired by the Electro magnetic Compatibility (EMC) Directive for Ge neral Immunity Co m p liance, EN 5 ...
¿Tienes una pregunta acerca de Connect Tech BlueStorm Universal PCI?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Connect Tech BlueStorm Universal PCI, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Connect Tech BlueStorm Universal PCI probablemente compartirá una forma de solucionarlo.