-
NEC LCD5710 - page 1
User ’ s Manual MultiSync LCD5710 57" LCD Colour Monitor This monitor is designed to operate in landscape orientation only . Do not use in portrait orientation. Using the monitor in portrait position can cause damage to the display and will void the warranty of the product. Downloaded From TV-Manual.com Manuals ...
-
NEC LCD5710 - page 2
Index Declaration of conformity ...................................................................................................... ....................... English-1 Important Information .......................................................................................................... ......................... English-2 W arning, Cautio ...
-
NEC LCD5710 - page 3
English-1 English DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: NEC Displ ...
-
NEC LCD5710 - page 4
English-2 Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MultiSync LCD5710 (L576RX) is in compliance with Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC Display Solutions, Ltd. 4-13-23, Shibaura, Minato-K ...
-
NEC LCD5710 - page 5
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TISYNC LCD5710 LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel ...
-
NEC LCD5710 - page 6
English-4 Contents Power Cord User ’s Manual V ideo Signal Cable (D-SUB to D-SUB Cable) Wireless Remote Control and AA Batteries Clamper x 3 Y our new MultiSync LCD5710 monitor box* should contain the following: • LCD monitor • Power Cord •V ideo Signal Cable • User ’s Manual •W ireless Remote Control and AA Batteries • Clamper x 3 ...
-
NEC LCD5710 - page 7
English-5 English 8 1 2 3 4 5 6 7 EXIT MUTE INPUT 10 EXIT MUTE INPU T 9 7 DOWN ( ) button Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSM menu. 8 EXIT button Activates the OSM menu when the OSM menu is turned-off. Acts as EXIT button to move to previous menu ...
-
NEC LCD5710 - page 8
English-6 T erminal Panel 7 AUDIO IN 1, 2, 3 To input audio signal from external equipment such as a computer , VCR or DVD player . 8 AUDIO OUT To output the audio signal from the AUDIO IN 1, 2 and 3 jack. 9 VIDEO INPUT/OUTPUT Connector VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA connectors are not available at ...
-
NEC LCD5710 - page 9
English-7 English 1 POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. 2 INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO] or [VIDEO<S>]. [VIDEO<S>] is enabled by selecting the “SEP ARA TE” mode in the OSM or by having the “S-VIDEO” cable conne ...
-
NEC LCD5710 - page 10
English-8 Point the top of the remote control toward the LCD monitor ’s remote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor ’s remote control sensor and at a horizontal and vertical angle of within 30° within a distance of about 3 m/10 ft. Operating Range for the ...
-
NEC LCD5710 - page 11
English-9 English 1. Determine the installation location CAUTION: DO NOT A TTEMPT T O INST ALL THE LCD MONITOR BY YOURSELF . Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY TWO OR MORE PEOPLE. It is recommended that 4 people ...
-
NEC LCD5710 - page 12
English-10 9. Adjust the image (See pages 20-28) Make adjustments when picture adjustment such as the brightness or contrast is required. 10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used. “SCREEN SA VER” (See page 24), “SIDE BORDER COLOR” (See pag ...
-
NEC LCD5710 - page 13
English-11 English 4. T o avoid falling down Fasten the LCD monitor to wall using a cord or chain, which is sufficient to support the weight of the LCD monitor (approx. 63.0kg). The wall must be strong enough to support the monitor and mounting accessories. Before moving the LCD monitor , the cord or chain should be removed. 5. T o prevent the main ...
-
NEC LCD5710 - page 14
English-12 Mounting Position of Ferrite Core Ferrite Core To connector of PC To AUDIO 1 of monitor Attaching the Ferrite Core Attach the Ferrite Core to PC Audio Cable. Use of the cable without mounting the ferrite core will result in the occurrence of noise. 1 Open the ferrite core and clamp it on the PC Audio cable. 2 Close the ferrite core. Atta ...
-
NEC LCD5710 - page 15
English-13 English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image. Some video cards and pixel clock over 165MHz may not display an image correctly . Y our LCD monitor displays proper image adjusting the factory preset timing signal automatically . <Factory pr ...
-
NEC LCD5710 - page 16
English-14 Connecting your Macintosh computer to your LCD monitor will enable you to display your computer ’s screen image. Some video cards or drivers may not display images correctly . Connect the LCD Monitor to Macintosh •T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor , use the supplied PC - Video RGB signal cable ...
-
NEC LCD5710 - page 17
English-15 English LCD monitor Equipment with a digital interface such as a personal computer with RGB output (TMDS) DVI-D connector DVI-D connector To DVI output To audio output Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a C ...
-
NEC LCD5710 - page 18
English-16 Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user ’s manual for more information. Connect the LCD Monitor to a DVD Player •T o connect the DVD/HD IN connector (BNC) on the LCD monitor , use a separately available BNC connector cable. Y ou will need a BNC-to-RCA adapter ...
-
NEC LCD5710 - page 19
English-17 English Y ou can connect your stereo amplifier to your LCD monitor . Refer to your amplifier owner ’s manual for more information. Connect the LCD Monitor to a Stereo Amplifier •T urn on the LCD monitor and the amplifier only after all connections have been made. • Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LC ...
-
NEC LCD5710 - page 20
English-18 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on, or red when in off mode. The monitor can be powered on or off using the following three options: 1. Pressing the power button. Note: Before pressing the power button, be sure to turn on the Main Power Switch on the LCD monitor . Main ...
-
NEC LCD5710 - page 21
English-19 English Power Indicator Using Power Management The LCD monitor follows the VESA approved DPM Power Management function. The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period. The power management featur ...
-
NEC LCD5710 - page 22
English-20 MAIN MENU PICTURE SCREEN AUDIO PIP CONFIGURA TION 1 CONFIGURA TION 2 ADV ANCED OPTION :SEL SET :NEXT :RETURN MENU :EXIT MENU PICTURE BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL COLOR CONTROL COLOR TEMPERA TURE PICTURE RESET :SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU PICTURE BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL COLOR CONTROL COLOR TEM ...
-
NEC LCD5710 - page 23
English-21 English Adjust the tint of the screen. Press + button to Skin colour becomes greenish. Press - button to Skin colour becomes purplish. Adjust the colour depth of the screen. Press + button to increase colour depth. Press - button to decrease colour depth. R, Y , G, C, B, M, S: Increases or decreases Red, Y ellow, Green, Cyan, Blue, Magen ...
-
NEC LCD5710 - page 24
English-22 Adjusts the vertical size by increasing or decreasing the setting. Press + button to expand the height of the image on the screen. Press - button to narrow the height of the image on the screen. Selects the screen zoom mode. Zoom mode will be selected when you select the “ZOOM” by pushing the “SIZE” button on remote controller . ...
-
NEC LCD5710 - page 25
English-23 English Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “Picture-in-Picture” (PIP) mode. “Large”, “Middle” and “Small” are available. Selecting the sound source in PIP mode. When selecting “MAIN AUDIO”, you will get the sound for the main picture and when selecting “PIP AUDIO”, ...
-
NEC LCD5710 - page 26
English-24 Select “SCREEN SA VER” functions to reduce the risk of the “image persistence”. GAMMA: The display gamma is changed and fixed when selected “ON”. COOLING F AN: The built in cooling fan is always on when set “ON”. BRIGHTNESS: The brightness is decreased when selected “ON”. MOTION: Image is slightly expanded and moves 4 ...
-
NEC LCD5710 - page 27
English-25 English To compensate for image degradation, which is caused by using a long cable. RED/GREEN/BLUE DELA Y To adjust the each phase of RED, GREEN and BLUE signal. LEVEL: 0 - 6 RED/GREEN/BLUE SHARPNESS To adjust the each performance degradation of RED, GREEN and BLUE signal. LEVEL: 0 - 45 SOG PEAK To adjust the shape of Sync on Green signa ...
-
NEC LCD5710 - page 28
English-26 Selects the method of input detection when more than two computers are connected. FIRST DETECT : When the current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the n ...
-
NEC LCD5710 - page 29
English-27 English Selects the image flipping or rotation. NORMAL: Normal display . H MIRROR: Mirror image for horizontal direction. V MIRROR: Mirror image for vertical direction. ROT A TE: Rotate the image 180 degrees. Changes the display area of the image. OVERSCAN: Set to display area about 95% UNDERSCAN: Set to display area about 100% Selects I ...
-
NEC LCD5710 - page 30
English-28 Information of status for COOLING F AN, BRIGHTNESS and TEMPERA TURE. COOLING F AN comes to run when inside temperature is over a guaranteed limit. BRIGHTNESS comes to be decreased when inside temperature is over guaranteed limit with cooling fun. In this case warning is displayed on the screen. Adjusts the delay time from “standby” t ...
-
NEC LCD5710 - page 31
English-29 English 3. Reducing the environmental temperature is effective for long life use. When Protection board (glass, acryl) is installed over the LCD surface, enclosed into the box / wall, or stack the monitor , please utilize the temperature sensors inside monitor . To reduce the environmental temperature, the monitor should be set Low Brigh ...
-
NEC LCD5710 - page 32
English-30 Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC NOTE: If your PC (IBM or IBM compatible) is e ...
-
NEC LCD5710 - page 33
English-31 English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent in 400ms. (2) The LCD monitor will send a return command 400ms* after it has received and encoded. If the command isn’t received correctly , the LCD monitor will not send the return command. (3) The personal computer checks the command and confi ...
-
NEC LCD5710 - page 34
English-32 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. Colour Control Systems: Allows you to adjust the colours on your screen and customize the colour accuracy of your monitor to a variety of standards. OmniColor: Combines Six-axis colour control an ...
-
NEC LCD5710 - page 35
English-33 English T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display c ...
-
NEC LCD5710 - page 36
English-34 Specifications Product Specifications Analog Input Digital Input LCD Module 57" /145.0cm diagonal Pixel Pitch: 0.6525mm Resolution: 1920 x 1080 dots Colour: Over 16 million colours (depending on video card used) Brightness: 450cd/m 2 (T yp.) Contrast Ratio: 900:1 V iewing Angle: Up 89°/ Down 89°/ Left 89°/ Right 89° (typ) @ CR&g ...
-
NEC LCD5710 - page 37
English-35 English Mounting on W all or Ceiling DO NOT mount the monitor yourself. Please ask dealer . For proper installation it is strongly recommended you use a trained, qualified technician. Please inspect the location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight of the unit. Product warranty d ...
-
NEC LCD5710 - page 38
English-36 Pin Assignment 1) Analog RGB input (MiniDsub15p): R G B 2 Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC) 10 SYNC-GND 11 GND 12 DDC-SDA 13 H-SYNC 14 V -SYNC 15 DDC-SCL 2) S-VIDEO input: V I D E O Pin No Name 1 GND 2 GND 3Y (Luminance) 4C (Chroma) 3) Digi ...
¿Tienes una pregunta acerca de NEC LCD5710?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con NEC LCD5710, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con NEC LCD5710 probablemente compartirá una forma de solucionarlo.