-
Eclipse CD5100 - page 1
㪜㪄㫀㪪㪜㪩㪭㩷㪦㫇㪼㫉㪸㫋㫀㫆㫅㩷㪞㫌㫀㪻㪼 CD5100 We appreciate your purchase of this head unit. Please read through this manual in order to ensure correct operation. We suggest that after reading it you keep this manual in a safe place for future reference. ...
-
Eclipse CD5100 - page 2
Using the Area Shot function How to operate the Area Shot function (U.S.A./CANADA only) About the Area Shot function Using the Area Shot function, route data retrieved from the ECLIPSE E-iSERV web site containing maps to predetermined destinations and guidance information can be displayed on your main unit. Importing Area Shot data • Load the Are ...
-
Eclipse CD5100 - page 3
File extension XXXXXXXX.twn Automatically generated filename File extension XXXXXXXX.ast • Disc formats that may be used are as follows: • CD-ROM (MODE1) • CD-ROM (MODE2_FORM1) * NOTE: CD-ROMs written in MODE2_FORM2 cannot be read. • NOTE: The fi le names can be changed within 8 alphanumeric characters (space cannot be used.) • One each ...
-
Eclipse CD5100 - page 4
3 Distance remaining : If an optional GPS unit is not connected, this indicates the distance between intersections. When an optional GPS unit is connected, this area indicates the distance from the current vehicle position to the next intersection (accuracy of the distance displayed may vary depending on the quality of GPS unit/reception) 4 Manuall ...
-
Eclipse CD5100 - page 5
OVERALL VIEW : All over view of the area can be displayed. When GPS reception is available : Current position can be displayed. The user can zoom in on an area (indicated by the red rectangle) as shown in the CLOSE UP VIEW below . 㪈 㪊 㪉 CLOSE UP VIEW : Gives the user a more detailed map for the selected area. The map is displayed with a scale ...
-
Eclipse CD5100 - page 6
Route Assist Operation [CUSTOM/MENU] button : Activates Menu Selection mode (press and hold for more than 1 second). [MUTE/Area Shot] button : T urns the Area Shot function ON/OFF (press and hold for more than 1 second). [MODE] button : Switches between the Route Assist mode and the T own map mode (press and hold for more than 1 second). [ENTER] bu ...
-
Eclipse CD5100 - page 7
A TTENTION When the Scroll Pattern is set to “Repeat”, the information text will be scrolled repeatedly at a certain time (For details of the operation, see the Owner ’ s Manual). Displaying vicinity POI information POI locations and information can be displayed if POI data has been downloaded from the E- iSERV website along with map data. Up ...
-
Eclipse CD5100 - page 8
A TTENTION The ‘POI Select’ is operable only when the Area Shot mode is activated and the Route Assist is selected. Displaying POI information Press the button [1] to [5] to display the corresponding POI information, when the POI icons are displayed on the map. The POI information displayed consists of : • Name/name of business • T elephone ...
-
Eclipse CD5100 - page 9
Cycling through Guidance Points Use the [SELECT] (Upper/Lower) buttons to cycle back and forth through all of the Guidance Points. Upper : Jumps to a later guidance point than that currently being displayed in the guidance list screen. Lower : Jumps to an earlier guidance point than that currently being displayed in the guidance list screen. NOTE : ...
-
Eclipse CD5100 - page 10
GPS Functions (optional GPS unit required) The following functions become available in addition to the aforementioned standard functions when an optional GPS unit is connected : • Current position is displayed • Automatic map switching • Guidance tone • Automatic volume adjustment (For details of the operation, see ‘A VL (Automatic V olum ...
-
Eclipse CD5100 - page 11
Display switches to Route map* The current position mark enters the range of the next Guidance Point map. Display switches to Guidance Point map Current position moves outside the range of the Guidance Point map. Display switches back to Route map* Display continues to alternate between Guidance Point route map and Guidance Point map view .* * The ...
-
Eclipse CD5100 - page 12
Guidance T one The guidance tone will sound at certain times, such as when the map is switched or when entering the vicinity of a guidance point (within about a 0.2 mile radius), to inform you of the guidance point. A TTENTION • T wo kinds of guidance tone are provided: • When the map is switched: A sound that inform you of switching the area ? ...
-
Eclipse CD5100 - page 13
T own Map Operation Using this function T own Map of a specified area can be displayed onscreen (data must be downloaded from the ECLIPSE E-iSERV web site prior to use). [CUSTOM/MENU] button : Activates Menu Selection mode (press and hold for more than 1 second). [MUTE/Area Shot] button : T urns the Area Shot function ON/OFF (press and hold for mor ...
-
Eclipse CD5100 - page 14
Use the [SELECT] (Upper/Lower/Right/Left) button to move the map selection frame in T own Map overall view or to jump to the next map in the corresponding heading in close up view . Upper : Jumps to the next map screen to the North of the current map displayed. Lower : Jumps to the next map screen to the South of the current map displayed. Right : ...
-
Eclipse CD5100 - page 15
Automatic map switching Using your vehicle position information, the current location is displayed on the map. When the CLOSE UP VIEW is selected, the map automatically scrolls according to your vehicle position. Press the [RTN] button when the CLOSE UP V iew is selected. When the area where your vehicle position mark is not included is displayed w ...
-
Eclipse CD5100 - page 16
Motion Picture customization Importing display data About the Motion Picture Customize Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV (web site), to the unit. For details of the operation, see ‘Importing display data (DISP Data)’ in the Owner ’ s Manual. Applications for creating Motion Picture, W allpap ...
-
Eclipse CD5100 - page 17
data other than the import data has also been saved to the CD-R. * The Motion Picture, W allpaper and SlideShow created using the ”Cutting Board” can also be written to the USB memory or CD-R. Load the downloaded data from the USB memory or CD-R to the unit. For details of the operation, see 'Importing display data (DISP Data)' in the ...
-
Eclipse CD5100 - page 18
Steering R emote Contr ol Importing steering remote data (U.S.A. only) About the Steering Route Control The vehicle’s factory loaded steering remote becomes inoperable when the CD5100 is installed. The ECLIPSE web site (E-iSERV) provides software that enables steering remote operation even with the installation of the main unit. Import this softw ...
-
Eclipse CD5100 - page 19
Load the downloaded data from the USB memory or CD-R to the unit. For details of the operation, see ' Reading steering remote data (U.S.A. only) ' in the Owner's Manual. A TTENTION • This function is available only for the vehicles that have steering remote with the voltage detection type interface. • For detail of the setting, p ...
¿Tienes una pregunta acerca de Eclipse CD5100?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Eclipse CD5100, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Eclipse CD5100 probablemente compartirá una forma de solucionarlo.