Manual de instrucciones Ingersoll-Rand 8476-A1

12 de páginas 0.82 mb
Descargar

Pasar a la página of 12

Summary
  • Ingersoll-Rand 8476-A1 - page 1

    OPERATORS MANUAL a- SECTION MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE “0004” SERIES GRINDERS Released: 10/72 Revised: 3-l0-95 Form: 006-2 Tool Products Models: 8475-A-( ), 8475-A1, 8476-A, 8476-A1, 8477-A, 8477-A1, 8478-A and 8478-A1. READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT. FAILURE ...

  • Ingersoll-Rand 8476-A1 - page 2

    FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY. Wear eye protection when operating or performing maintenance on this tool. Turn off air supply and disconnect air supply hose before installing, , removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. Do not carry the tool by the hose. D ...

  • Ingersoll-Rand 8476-A1 - page 3

    ROUTINE LUBRICATION REQUIREMENTS Ml0 32 Lack of or an excessive amount of lubrication will affect the perfor- mance and life of this tool. Use only recommended lubricants at below time intervals: EVERY 8 HOURS OF TOOL OPERATION - Fill lubricator reser- voirof recommended F.R.L. with spindle oil (29665). If an in line or air line lubricator is not u ...

  • Ingersoll-Rand 8476-A1 - page 4

    MODEL IDENTIFICATION The grinder models listed in the model identification table above are furnished with a collet as standard equipment and are intended for use with mounted wheels and shall not be used with other type grinding wheels. Other size collet inserts or other collet assemblies listed on page 10 can be furnished with the above listed mod ...

  • Ingersoll-Rand 8476-A1 - page 5

    DISASSEMBLY AND ASSEMBLY OF TOOLS Ml0 Disconnect air supply from tool or shut off air supply and exhaust (drain) line of compressed air BEFORE performing maintenance or service to tool. Before starting to disassemble or assemble this tool (any part or completely), be sure to read “Inspection, Maintenance and Instal- lation” section. To minimize ...

  • Ingersoll-Rand 8476-A1 - page 6

    TYPICAL CROSS SECTION OF TOOL -VALVE - MOTOR SPINDLE 6 ...

  • Ingersoll-Rand 8476-A1 - page 7

    SPINDLE SECTION Ml 3 COLLET NUT 41751 T r COLLET BODY 43178 -- _- - - COLLET ASSEMBLY 43179-( ) COLLET (SEE TABLE, PAGE 4) ET ASSEMBLY 44123 COLLET ASSEMBLY 44124-8 -INCLUDED WITH NOSE PIECE 33220 ‘!-COLLET 31812-8 COLLET GUARD 43897 DIFFUSER 43893 COLLET 41750-3 SPINDLE 44602 LOCK NUT 31810 NOSE PIECE 31811 COLLET 31812-8 -- - - (INCLUDES BEARIN ...

  • Ingersoll-Rand 8476-A1 - page 8

    SPINDLE SECTION DISASSEMBLY a. Remove driver (43163) from spindle. Tap end of spindle with a soft face hammer to loosen and remove spindle out nose end (44605) and bearing (33237) to housing. of housing. b. Assemble spindle to housing and assemble driver (43163) to spindle. ASSEMBLY a. Assemble felt seal (44606), wave washer (43150), bearing (42516 ...

  • Ingersoll-Rand 8476-A1 - page 9

    VALVE SECTION Ml0 32 0 43160 LEVER FOR NON -EU MODELS 0 45953 LEVER ASS’Y FOR -EU MODELS Cl * LEVER - ROLL PIN Yl78-44 __o__I ROLL PIN Yl78-216 r , BUT HOUSING431761 (BUlTON THROTTLE) ------ROLL PIN Yl78-211 (BUTTON THROTTLE) HOUSING 43161 (LEVER THROlTLE, NON -EU) (LEVER - VALVE 43170 V~UTTON THROTTLE) .TON 43169 SPRING 31125-----@ v REGULATOR 4 ...

  • Ingersoll-Rand 8476-A1 - page 10

    ACCESSORIES OPTIONAL COLLETS COLLET COLLET NUMBER ASSEMBLY NO. SIZE CAPACITY 41750-1 43179-1 1/8" 3/32” - 1/8” 41750-2 43179-2 3/16” 5/32” - 3/1 6” 41750-3 43179-3 1/4” 7/32” - 1/4” 41750-11 43179-11 3mm 41750-12 43179-12 I - ------ I 6mm I SERIES 43179 3-PIECE COLLETS COLLET NUT - 41751 COLLET BODY - 43170 5/16” - 24 THREAD ...

  • Ingersoll-Rand 8476-A1 - page 11

    TROUBLE SHOOTING Ml0 32 LISTED BELOW ARE SOME OF THE MOST COMMON CAUSES FOR THE GRINDER TO MALFUNCTION. MALFUNCTIONS BEYONDTHE SCOPE OF THIS MANUAL SHOULD BE BROUGHT TO THE ATTENTlON OF YOUR ARO REPRESENTATIVE OR RETURN THE TOOL TO THE FACTORY FOR REPAIR. LOW SPEED AND POWER OR GRIND- ER WILL NOT RUN. THROTTLE VALVE HARD TO OPERATE. TOOL WILL NOT S ...

  • Ingersoll-Rand 8476-A1 - page 12

    Part of world wide Ingersoll-Rand PN49999-116 ...

Fabricante Ingersoll-Rand Categoría Grinder

Los documentos del dispositivo Ingersoll-Rand 8476-A1 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Ingersoll-Rand
- manuales de instrucciones 8476-A1
- hojas de producto Ingersoll-Rand
- folletos informativos
- o etiquetas energéticas Ingersoll-Rand 8476-A1
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Ingersoll-Rand 8476-A1.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Ingersoll-Rand 8476-A1, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Ingersoll-Rand 8476-A1. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Ingersoll-Rand 8476-A1.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Ingersoll-Rand 8476-A1, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Ingersoll-Rand 8476-A1. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Ingersoll-Rand 8476-A1.

El manual de instrucciones completo de Ingersoll-Rand debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Ingersoll-Rand 8476-A1 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Ingersoll-Rand 8476-A1, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Ingersoll-Rand 8476-A1 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Ingersoll-Rand 8476-A1 - que deben facilitarnos los primeros pasos durante el uso de Ingersoll-Rand 8476-A1
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Ingersoll-Rand 8476-A1
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Ingersoll-Rand 8476-A1 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Ingersoll-Rand 8476-A1?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Ingersoll-Rand 8476-A1, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Ingersoll-Rand 8476-A1 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)