-
Tannoy VNET12HP - page 1
Owners Manual VNET 12, VNET 12 HP, VNET 15, VNET 300 VNET 15 HL, VNET 15BP & VNET 18DR TM 6481 0470 Tannoy adopts a policy of continuous improvement and product specification is subject to change. Tannoy United Kingdom T: +44 (0) 1236 420199 F: +44 (0) 1236 428230 E: enquiries@tannoy.com Tannoy North America T: (519) 745 1158 F: (519) 745 2364 ...
-
Tannoy VNET12HP - page 2
TM 2 3 1.0: IMPORTANT SAFETY INSTRUCTIONS 2.0: INTRODUCTION 3.0: THE BASICS 3.1 Unpacking and visual checks 3.2 Preliminary recommendation 4.0: INTERF ACE P ANEL 5.0: OPERATION 5.1: AC power requirements 5.2 Cooling 5.3 LED functions 5.4 Limiters 5.5 Audio Connections 5.6 User DSP on/off 6.0: NETWORK CONNECTIONS 6.1 Linking cabinets 7.0 SOFTWARE IN ...
-
Tannoy VNET12HP - page 3
4 5 2.0: INTRODUCTION The T annoy VNET12HP & VNET15 loudspeakers utilise high performance Dual Concentric™ drive units – the 12” (300mm) PowerDual™ and the 15” (380mm) PowerDual™. The substantially increased ef ficiency and power handling of these all-new driver designs ensures that the VNET12HP and VNET15 are capable of delivering ...
-
Tannoy VNET12HP - page 4
CM I N T E R T E K L I S T E D C US THIS CLASS D DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS AND COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION SUBJECT TO CONDITIONS ST ATED IN THE MANUAL. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE AVI ...
-
Tannoy VNET12HP - page 5
6.0: NETWORK CONNECTIONS Interconnection between the network computer and the speakers is very straight forward, using twisted pair cable and simple connectors. The RS485 interface operates on a shared bus so that a single computer can control any amplifier on the bus, and the computer may gather status information from any device on the bus. Each ...
-
Tannoy VNET12HP - page 6
7.0 SOFTW ARE INST ALLA TION Y ou can check to see if you already have the .NET Framework 1.1 installed by clicking Start on your Windows desktop, selecting Control Panel , and then double-clicking the Add or Remove Programs icon. When that window appears, scroll through the list of applications. If you see Microsoft .NET Framework 1.1 listed, the ...
-
Tannoy VNET12HP - page 7
8.0 SOFTW ARE OPERA TION 12 13 TM Menus The menu system is arranged like so: File Open opens a file which contains parameters for the device Save saves the current settings in the current file name Save As saves the current settings under a new file name Exit closes the application Device Update update device firmware (requires loader utility) Netw ...
-
Tannoy VNET12HP - page 8
SPEAKER PROPERTIES At the top of the panel there are several pieces of information about the connected device (which are only activated when going On-line to a device): Model Name The VNET™ model number Loudspeaker name T o uniquely identify the speaker (i.e. delay 3) Configuration Name A name of up to 12 characters that you may enter as a name f ...
-
Tannoy VNET12HP - page 9
7.0 SOFTW ARE OPERA TION Smooth adjustment Whenever a parameter is changed, VNET™ will assess the likely impact on the signal path, and will intelligently smoothly ramp to the new value, or mute for a short time if the change could otherwise cause any undesirable sound to be reproduced. Power ON & OFF At the bottom left hand corner of the con ...
-
Tannoy VNET12HP - page 10
18 19 TM 8.1: UPDA TING FIRMW ARE 8. At the bottom right hand side of the screen a blue bar will show the progress of the firmware update. 9. After the download is complete the following message appears. The DSP is updating at this point. Do not power down the unit or disconnect any network cable at this point. During the update a red bar will show ...
-
Tannoy VNET12HP - page 11
20 2 1 TM 1 1.0 DIMENSIONS 1 1.0 DIMENSIONS 555.0 290.0 43.0 667.0 710. 652.4 290.0 43.0 609.4 THIS EQUIPMENT MUST BE EARTHED LINK NETWORK IN NETWORK LINK INPUT ON - OFF USER DSP T10AL 250V POWER FUSE - POWER - SIGNAL - LIMIT MANUFACTURED IN THE UNITED KINGDOM CAUTION OUVRIR. RISQUE DE CHOC ELECTRIQUE-NE PAS AVIS: RAIN OR MOISTURE SHOCK DO NOT EXPO ...
-
Tannoy VNET12HP - page 12
2 2 TM 12.0 PERFORMANCE DA T A 13.0: TECHNICAL SPECIFICA TIONS SYSTEM V NET 12 V NET 12HP V NET 15 V NET 300 System Type Full Range - V ented Full Range - V ented Full Range - V ented Full Range – V ented Frequency Response (1) +/- 2dB 60Hz - 25kHz 55Hz - 23Hz 40Hz - 23Hz 45Hz - 23kHz Maximum SPL(2) Average 120dB 124dB 126dB 122dB Peak 126dB 130d ...
-
Tannoy VNET12HP - page 13
24 TM SYSTEM V NET 15BP V NET 15HL V NET 18DR System Type Subwoofer - Band Pass Full Range – Horn Loaded Full Range – Direct Radiating Frequency Response (1) +/- 3dB 35Hz - 150Hz 48Hz - 250Hz 27Hz - 200Hz Maximum SPL (2) Average 127dB 130dB 130dB Peak 133dB 136dB 136dB Driver Complement 1 x 380mm (15”) 1 x 380mm (15”) 1 x 458mm (18”) Bass ...
-
Tannoy VNET12HP - page 14
26 27 TM Use the table of parts along with the assembly drawing (Figure 3.) to assemble the VMY . Figure 4 shows the VMY assembled. Fig.1 Fig.2 Number on Assembly View (Fig 3.) Description Quantity 1 Hanging Bracket 2 2 Cross Member 1 3 Pivot Stud 2 4 M10 Plain W asher 2 5 M8 Spring W asher 2 6 M10 Spring W asher 4 7 M10 x 30mm Screw 2 8 M8 x 20mm ...
-
Tannoy VNET12HP - page 15
28 29 TM 14.3 : SECUR ET - VMB W ALL MOUNTING BRACKET FIG 1. The VMB is wall mounting bracket for the attachment of a VMY , available in both black and white finishes, allowing the user secure the T annoy VNET™ Full range loudspeaker in either portrait or landscape orientations to a wall. The T annoy VNET™ loudspeaker is attached to the bracket ...
-
Tannoy VNET12HP - page 16
30 31 TM 14.5 : SECUR ET - VTH POLE MOUNT The T annoy VNET™ loudspeakers are fitted as standard with a blanking plate on the base of the cabinet. However , should you ever wish to mount the VNET™ onto a standard 35mm pole mount this blanking plate can be quickly and easily removed and replaced by a VTH pole mount. The same screws which secure t ...
-
Tannoy VNET12HP - page 17
16.0: W ARRANTY No maintenance of the VNET™ loudspeakers is necessary. All T annoy professional loudspeaker products are covered by a 5 year warranty from the date of manufacture (1 year for electronics), subject to the absence of misuse, overload or accidental damage. Claims will not be considered is the serial number has been altered or removed ...
-
Tannoy VNET12HP - page 18
TM NOTES NOTES ...
¿Tienes una pregunta acerca de Tannoy VNET12HP?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Tannoy VNET12HP, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Tannoy VNET12HP probablemente compartirá una forma de solucionarlo.