-
Royal Sovereign 900N 1 - page 1
OWNER'S MANUAL PROFESSIONAL PHOTO LAMINATOR ROYAL SOVEREIGN INTL.INC. PLEASE READ AND SAVE INSTRUCTIONS NPH-1200 / 900 NPH-1200N/900N 1 ...
-
Royal Sovereign 900N 1 - page 2
TOPICS PAGE INTRODUCTION ----------------------------------------- - SAFETY PRECAUTIONS ----------------------------------- - CHARACTERISTICS OF NPH-1200N/900N --------------------- - SPECIFICATIONS ---------------------------------------- - SETUP ------------------------------------------------ MAJOR PARTS IDENTIFICATION -------------------------- ...
-
Royal Sovereign 900N 1 - page 3
Thank you for purchasing a Royal Sovereign Laminating Machine. To insure high quality lamination, please read this instruction manual thoroughly. For additional product support or factory-direct ordering information, call Royal Sovereign Customer Service at (201)568-0830 or toll free call, (800)397-1025. 1. To prevent the possibility of electrical ...
-
Royal Sovereign 900N 1 - page 4
This machine has been designed using the latest laminating technology. 1. This machine is controlled by a state-of-the-art Microprocessor. a) Protect the rollers--When the power is off or a power failure occurs, rollers continue to turn until the unit properly cools down. b) Automatic overheating protection--If a temperature sensor should fail, the ...
-
Royal Sovereign 900N 1 - page 5
Place laminator on a sturdy, flat work surface. Allow ample clearence behind laminator for laminated document or photograph to exit completely without bending. Connect laminator to an electrical outlet that matches laminator's rated voltage and power requirements. If an extension cord is required, use a cord rated higher than the laminator&apo ...
-
Royal Sovereign 900N 1 - page 6
1. Top Cabinet 2. Roller Cover 3. Roller Cover Screws 4. Control Panel 5. LCD Window 6. Input 7. Output 8. Power Cord MAJOR PARTS IDENTIFICATION 6 ...
-
Royal Sovereign 900N 1 - page 7
Appropriate speed and temperature may be set, using the LCD controller. The LCD panel was designed for convenience, by incorporating the ability to program your settings into "Memory". 1. CONTROL PANEL SETTINGS LCD DISPLAY BUTTONS CONTROL PANEL INSTRUCTIONS T-Check COLD MEMORY HOT/COLD 7 ...
-
Royal Sovereign 900N 1 - page 8
2. LCD WINDOW 1. * 6 film thickness options 75 Mic=3 mil, 100 Mic=4 mil, 125 Mic=5 mil 2. SPEED * 7 speed options Setting 1 is slowest / Setting 7 is fastest 3. TEMPERATURE Display the present temperature. 4. Is displayed when the present temperature is reached. 5. Indicates to wait till blinking stops. Current temperature is higher or lower than t ...
-
Royal Sovereign 900N 1 - page 9
3. BUTTON FUNCTIONS : Check current temperature : Hot/Cold function : Working condition and Cold function cancel : Increase temperature : Decrease temperature : Increase speed : Decrease speed : Restore the memorized working setting : Restore the memorized working setting : Reverse function : Power On/Off T-Check MEMORY HOT/COLD T-Check COLD MEMORY ...
-
Royal Sovereign 900N 1 - page 10
4. HOW TO SET THE BUTTONS (Buzzer rings each time you press the button.) 1.Temperature available range from 20℃ to 160℃. 2.Each time you press or to set temperature, it will change 1℃(1℉) at a time. If you press the button for more than 2 seconds, temperature will change automatically. 1.You can use 7 different lamination speed. 2.You can c ...
-
Royal Sovereign 900N 1 - page 11
1) Memorizing working condition 1. The laminator can memorize up to 6 settings. 2. Use up and down arrows to set or 3. When you complete the optimum laminating conditions (Speed & Temperature), button. This setting is memorized and confirmed when the light blinks. 4. To enter other settings into memory, repeat steps 2 and 3. 2) Using the memori ...
-
Royal Sovereign 900N 1 - page 12
1. HOT LAMINATING 1. Press the power button. 2. Please refer Information Panel on the front of product. 3. Select a memory setting by pressing the and button. 4. It is ready when the LCD window shows and the buzzer rings three times. 5. After Insert document or photograph to be laminated into a laminating pouch, insert pouch squarely into opening s ...
-
Royal Sovereign 900N 1 - page 13
2. COLD LAMINATING 1. Press the power button to turn on. 2. Press 3. It is ready when LCD window shows and the buzzor rings three times. 4. Insert document into a Royal Sovereign cold laminating pouch as follows. 1) Prepare cold pouch film. 2) Remove protective paper inside cold pouch. (Be careful not to allow the pouch to close and seal itself clo ...
-
Royal Sovereign 900N 1 - page 14
3. COLOR FOIL LAMINATING **Your laminator has ability to add color by applying color foil to documents copied or printed by lasor printer or toner copier.** **PAPER CARRIER is required** 1. Press the power button to turn the laminator on. 2. Find FOIL FUNCTION using the up arrow. 3. It is ready when LCD window shows and the buzzer rings 3 times. 4. ...
-
Royal Sovereign 900N 1 - page 15
4. MOUNT BOARD LAMINATING **You can laminate photographs or pictures on a hard mounting board up to 2mm thickness** 1. Press the power button to turn on. 2. Temperature 130 and speed 1 is set for Foil function. 3. It is ready when LCD window shows and the buzzor ri ngs 3 times. 4. Set material on Mount board then slide them into the opening slot 5. ...
-
Royal Sovereign 900N 1 - page 16
1. Cleaning rollers with a clean and thick paper 1) If film adhesive apears on the laminated pouch surface , Inse rt a sheet of clean, thick paper (about 0.5mm(1/50") thickness) into the machine 2~3 t imes on 100℃(212℉) setting. The paper will attract the excess adhesive from the roller. 2. Cleaning rollers with cleaning solvent. 1) When r ...
-
Royal Sovereign 900N 1 - page 17
1. Please be cautious that neckties, necklaces, long hair and clothing are kept well away while operating the laminator. 2. Prevent children from accessing the machine. 3. Make certain that the machine is connected to an adequate power source. 4. Do not use for any purpose other than lamination. 1. Width of upper and lower side of film should be sa ...
-
Royal Sovereign 900N 1 - page 18
This product is warranted for 1 year from date of purchase to b e free from electrical or mechanical defects in material and workmanship. Should product fail to operate during warranty period, return it, freight prepaid, to Royal Sovereign Corporation, 100 West Sheffield Avenue, Englewood, NJ 07631, for service. There will be no charge for parts an ...
¿Tienes una pregunta acerca de Royal Sovereign 900N 1?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Royal Sovereign 900N 1, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Royal Sovereign 900N 1 probablemente compartirá una forma de solucionarlo.