-
Oregon Scientific EMR899HGN - page 1
1 EN MULTI-CHANNEL IN-OUT CABLE FREE THERMO-HYGROMETER MODEL : EMR899HGN User Manual INTRODUCTION Congratulations on your purchase of the Multi-Channel In-Out Thermometer / Hygrometer (EMR899HGN) with a 433MHz cable- free thermo-hygro sensor. Enclosed with this package is one (1) main display unit and one (1) cable-free remote thermo-hygro sensor u ...
-
Oregon Scientific EMR899HGN - page 2
2 EN A Extra large two-line Liquid Crystal Display (LCD) Multifunction display showing temperature and humidity, max./min. memory, and trend indicators for the main unit and remote sensors. B CHANNEL button - Selects among different channels - Activates remote sensor scanning mode C IN/REMOTE - Selects between the main-unit display and a selected r ...
-
Oregon Scientific EMR899HGN - page 3
3 EN H Wall-mount holder Supports the remote unit in wall-mounting I Removable table stand For standing the remote unit on a flat surface BEFORE YOU BEGIN To ensure proper functioning of the EMR899HGN follow this setup procedure. For best operation: 1. Assign different channels to different remote units. 2. Insert batteries for remote units before ...
-
Oregon Scientific EMR899HGN - page 4
4 EN Follow these steps to install / replace batteries: 1. Remove the screws on the battery compartment. 2. Select the channel number on the CHANNEL slide switch. 3. Select the temperature display unit on the ° C/ ° F slide switch. 4. Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door ...
-
Oregon Scientific EMR899HGN - page 5
5 EN GETTING STARTED Once batteries are placed in a given remote sensor unit, it will start transmitting information at 40-second intervals. Also, for approximately a 3-minute duration, the main unit will automatically search for signals once batteries are installed. Upon successful reception, the individual channel temperature reading will be disp ...
-
Oregon Scientific EMR899HGN - page 6
6 EN The unit is in searching mode. Transmission data are securely registered. No signals. THE COMFORT-LEVEL ICONS The comfort level is based on the recorded relative humidity. An indicator will be displayed ot show if the level is comfortable, wet or dry. TEMPERATURE AND HUMIDITY TREND INDICATORS The temperature-trend and humidity-trend indicators ...
-
Oregon Scientific EMR899HGN - page 7
7 EN To deactivate the remote-sensor scanning mode: • Press any button. MAXIMUM AND MINIMUM TEMPERATURE AND HUMIDITY The maximum and minimum recorded temperature and humidity readings will automatically be stored in the memory. To display the maximum and minimum display memory: 1. Select the channel to be checked. 2. Press MEM/CLEAR once to displ ...
-
Oregon Scientific EMR899HGN - page 8
8 EN Note: The temperature range is from -50 ° C (-58 ° F) to +70 ° C (158 ° F). If this is the first time you set the limits, the lower limit will start from -50 ° C (-58 ° F) and the upper limit +70 ° C (158 ° F). Otherwise, the reading will start from the temperature last selected. The humidity range is from 2% to 98%. If this is the fir ...
-
Oregon Scientific EMR899HGN - page 9
9 EN TRANSMISSION COLLISION Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmis- sion and reception of temperature readings will res ...
-
Oregon Scientific EMR899HGN - page 10
10 EN THE RESET BUTTON This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values. PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: 1. ...
-
Oregon Scientific EMR899HGN - page 11
11 EN General RF Transmission Frequency : 433 MHz No. of Remote unit : Maximum of 3 RF Transmission Range : Maximum 30 meters Temperature compensation : 0.1 ° C to ( 0.2 ° F ) Temperature sensing cycle : around 40 seconds Power Main unit : 2 pcs UM-3 or “AA” 1.5V alkaline battery Remote sensing unit : 2 pcs UM-4 or “AAA” 1.5V alkaline bat ...
-
Oregon Scientific EMR899HGN - page 12
12 EN This product contains the approved transmitter module that complies with the essential requirements of Article 3 of the R&TTE 1999 / 5 / EC Directive, if used as intended and the following standards have been applied: Safety of information technology equipment (Article 3.1.a of the R&TTE Directive) Applied Standard EN 60950-1: 2001 El ...
-
Oregon Scientific EMR899HGN - page 13
13 EN Additional information: The product herewith complies with the requirements of the Low Voltage Directive 73 / 23 / EC, the EMC Directive 89 / 336 / EC and carries the CE marking accordingly. Carmelo Cubito Agrate Brianza (MI) / Italy January 2004 Manufacturer’s EU R&TTE Representative COUNTRIES RTTE APPROVAL COMPLIED All EC countries, S ...
-
Oregon Scientific EMR899HGN - page 14
14 EN MULTI-CHANNEL IN-OUT CABLE FREE THERMO-HYGROMETER Model: EMR899HGN User Manual EMR899_EN_R3 8/30/04, 11:36 AM 14 ...
-
Oregon Scientific EMR899HGN - page 15
15 EN ©2004 Oregon Scientific. All rights r eserved. 086-002233-103 EMR899_EN_R3 8/30/04, 11:36 AM 15 ...
¿Tienes una pregunta acerca de Oregon Scientific EMR899HGN?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Oregon Scientific EMR899HGN, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Oregon Scientific EMR899HGN probablemente compartirá una forma de solucionarlo.