-
Memorex MPH4385 - page 1
13 MEMOR Y DESKT OP TELEPHONE WITH CALLER ID AND CALL W AITING MODEL: MPH4385 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y . MPH-4385 (REVISED2/01).O/M.QXD 6/20/01 7:41 AM Page 18 ...
-
Memorex MPH4385 - page 2
W arning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide ...
-
Memorex MPH4385 - page 3
E–1 IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this product. 3. Do not use this product ne ...
-
Memorex MPH4385 - page 4
E–2 IMPORT ANT SAFETY INSTRUCTIONS 1. If your local telephone exchange only accepts Pulse dialing, you may have to switch the Tone/Pulse switch to Tone to access certain services that require Tone signalling (such as home banking). After the initial line is connected to the number you are calling, switch the Tone/Pulse switch to Tone to access To ...
-
Memorex MPH4385 - page 5
E–4 LOCA TION OF CONTROLS 5 4 2 1 22 6 10 12 3 9 7 8 13 14 15 16 17 18 20 19 21 11 1. Handset HI/LO Switch 2. Handset 3. DC 6V Jack (rear of unit) 4. FLASH Button 5. RINGER (HI/LO/OFF) Switch 6. Display 7. ERASE Button 8. TONE/PULSE Switch 9. Telephone Line Jack (rear of unit) 10. DIAL Button 11. Battery Compartment (bottom of unit) 12. SEARCH UP ...
-
Memorex MPH4385 - page 6
E–4 INST ALLA TION This unit can be used on a desk, or other level surface or mounted on the wall away from excessive heat or direct sunlight. Desk or Table Use 1. Set the RINGER switch to LO or HI to have the ringer sound when receiving a phone call. 2. Set the TONE/PULSE switch to TONE or PULSE to match the service provided on your telephone li ...
-
Memorex MPH4385 - page 7
E–5 POWER SOURCES BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 3. If the device is not to be ...
-
Memorex MPH4385 - page 8
E-6 TELEPHONE OPERA TION Programming the Language, Area Code, Time/Date, Flash Time and LCD Contrast Press and hold the DIAL button for 4 seconds to access the Options Menu, the display will show “OPTIONS MENU”. 1 Press the UP or DOWN button ❶ to select the desired setting (SET TIME/DATE, LOCAL AREA CODE, SET LANGUAGE, LCD CONTRAST, SET FLASH ...
-
Memorex MPH4385 - page 9
E–7 TELEPHONE OPERA TION Slide the RINGER HI/LO/OFF switch to the HI or LO position to turn the ringer on. 1 Slide the RINGER HI/LO/OFF switch to the OFF position to turn the ringer off. 2 RINGER HI/LO/OFF Switch Slide the TONE/PULSE switch to TONE or PULSE to match the service provided on your telephone line. If you are not sure of your service, ...
-
Memorex MPH4385 - page 10
E–8 TELEPHONE OPERA TION Press the FLASH button to hang up the phone without having to return it to the base. This is useful for using the phone with the Call Waiting feature. 1 FLASH Button Handset HI/LO Switch To increase/decrease the handset’s volume, slide the Handset HI/LO switch to the HI or LO position. 1 Press the HOLD button to put the ...
-
Memorex MPH4385 - page 11
E–9 TELEPHONE OPERA TION Manually Storing/Accessing Numbers in One-Touch Memories (M1-M3) This telephone is equipped with 3 memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each memory position. Press the PROGRAM button ❶ , then press the key buttons (0–9) ❷ to enter the desired teleph ...
-
Memorex MPH4385 - page 12
E–10 TELEPHONE OPERA TION Manually Storing/Accessing Numbers in Two-Touch Memories (0-9) This telephone is equipped with 10 additional memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each memory position. Press the PROGRAM button ❶ , then press the key buttons (0–9) ❷ to enter the des ...
-
Memorex MPH4385 - page 13
E–11 CALLER ID OPERA TION Make sure that the Caller ID service is turned on by your phone company. When you receive a call, the display will show the name, number, time and date of the caller. 1 If a call is received from an area which does not provide caller ID service, the display will show, “UNAVAILABLE”. 2 If a call is received from a cal ...
-
Memorex MPH4385 - page 14
E–12 CALLER ID OPERA TION Select the number using the UP and DOWN buttons ❶ . Press the DIAL button ❷ , the display will show “PICK UP or ADJ”. Press the DIAL button ❷ to cycle through the 7,10 and 11 digit numbers. For example, if a 10 digit number is displayed and you need to dial a one when dialing it, press the DIAL button ❷ until ...
-
Memorex MPH4385 - page 15
E–13 RESET SWITCH: The RESET switch is located at the bottom of the unit. If the telephone locks up or does not work properly, it must be reset, but the call and program memory will be lost. Make sure to program in the local area code before auto dialing (see page 6). Select the number using the UP and DOWN buttons ❶ . If the telephone number d ...
-
Memorex MPH4385 - page 16
E–14 TROUBLESHOOTING GUIDE SYMPTOM Telephone not working. No Dial Tone Phone does not ring. Voice level too low. Unit will not memory dial. Unit will not dial out. Caller ID not working. POSSIBLE CAUSE Phone Locked Up. Line cord not connected correctly. RINGER switch set to OFF position. Line cord not connected correctly. Wall Jack not working. H ...
-
Memorex MPH4385 - page 17
We at Memorex believe you will be pleased with your new product. Please read this Warranty Carefully. Memorex warrants this product to be free from manufacturing defects including original parts and workmanship for a period of ninety (90) days from the date of original purchase in, and if used in, the United States. Should you find your unit is not ...
-
Memorex MPH4385 - page 18
Memcorp, Inc. Weston, FL 33331 Printed in Hong Kong Visit our website at www.memorex.com MPH-4385 (REVISED2/01).O/M.QXD 6/20/01 7:41 AM Page 17 ...
¿Tienes una pregunta acerca de Memorex MPH4385?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Memorex MPH4385, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Memorex MPH4385 probablemente compartirá una forma de solucionarlo.