-
Freud Joinery Router - page 1
156 ROUTER BITS & SETS Joiner y Bits Dovetail Bits • Compatible with popular dovetail jigs, these bits produce smooth, intricate dovetail joints. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Application: Strong, attra ...
-
Freud Joinery Router - page 2
3/8 " 8 ° # 22-120 Dovetail Bits 157 ROUTER BITS & SETS Joiner y Bits Red Item Numbers Indicate 1/2 " Shank All Profile Drawings 1:1 Scale (Continued) 3/8 " 14° # 22-103 3/8 " 9° # 22-102 # 22-110 8° # 22-121 7/16 " 8° # 22-129 1/2 " 1/2 " 14° # 22-104 # 22-124 # 22-112 10° # 22-125 1/2 " 1/2 " ...
-
Freud Joinery Router - page 3
158 ROUTER BITS & SETS Joiner y Bits Butterfly Spline Bit • This bit produces a str ong, attractive method of joining wood. Use a 14-degree dovetail bit to produce the mating gr ooves. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as hand-held and table-mounted porta ...
-
Freud Joinery Router - page 4
Rabbeting Bits with Bearing Set • With interchangeable bearings to cut rabbets of dif ferent depths, these sets pr oduce super smooth cuts on both surfaces of the rabbet. • 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits. • Wr ench included. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use ...
-
Freud Joinery Router - page 5
160 ROUTER BITS & SETS Joiner y Bits Stacked Slotting Set • By changing the bearings this set will cut three dif ferent depths (1/4", 3/8", 1/2"). • Set includes Freud's slotting cutter arbor 60-202, 3 bearings and 4 specially designed slotting cutters. • Cuts all composition materials, plywoods, hardwoods, and softwoo ...
-
Freud Joinery Router - page 6
Biscuit Joining Set • Easy and economical way to join wood. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on hand-held and table-mounted portable routers. Application: Creating perfect slots for biscuit joining 161 ROUTER BITS & SETS Joiner y Bits Red Item Numbers Indicate 1/2 " Shank All Profile Drawing ...
-
Freud Joinery Router - page 7
162 ROUTER BITS & SETS Joiner y Bits Three Wing Slotting Cutters • Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and 60-102 for 1/2" shanks. • Compatible with 62-108 bearing. • Cutter 56-109 can be used for biscuit joining. • Cuts all composition materials, plywoods, hardwoods, and softwoods. ? ...
-
Freud Joinery Router - page 8
Slotting Cutter Arbors • For premium performance use with Fr eud slotting cutters, although compatible with any slotting cutter with a 5/16" bore. • Use on hand-held and table-mounted portable routers. Application: Producing smooth, pr ecise, accurate slots 163 ROUTER BITS & SETS Joiner y Bits Red Item Numbers Indicate 1/2 " Shank ...
-
Freud Joinery Router - page 9
164 ROUTER BITS & SETS Joiner y Bits Slotting Cutter Sets • Includes three wing slotting cutter , arbor and ball bearing. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on hand-held and table-mounted portable routers. Application: Producing slots and gr ooves 9/16" deep for T -moldings, Spline Joints, T o ...
-
Freud Joinery Router - page 10
Canoe Joint Bits • Bit 99-017 cuts the flute and 99-018 cuts the mating bead. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as table-mounted portable r outers. Application: Producing joints for pr ojects such as circular planters and canoes Reversible Glue Joint Bit • ...
-
Freud Joinery Router - page 11
166 ROUTER BITS & SETS Joiner y Bits Drawer Lock Bits • Drawer fronts ar e formed horizontally , flat on the table surface. • Drawer sides are formed vertically against the fence of the table. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on table-mounted portable routers. Application: Forming a strong join ...
-
Freud Joinery Router - page 12
167 ROUTER BITS & SETS Joiner y Bits Red Item Numbers Indicate 1/2 " Shank All Profile Drawings 1:1 Scale Lock Miter Bits • Run one board vertically and the piece to be joined horizontally . • 99-035 cuts thinner panels for projects such as humidors and jewelry boxes. • Cuts all composition materials, plywoods, hardwoods, and softwoo ...
-
Freud Joinery Router - page 13
170 ROUTER BITS & SETS Joiner y Bits Raised Panel “V” Joint Bit • Mating surfaces are at an angle, not vertical, so the dark lines like those cr eated by standard finger joint bits ar enot visible. • Bit does not have to be centered in the wood. • Simply raise or lower the bit 3/32" to route the mating edge. • Cuts all composit ...
-
Freud Joinery Router - page 14
Adjustable T ongue & Groove Bit Set • Exclusive Freud design featur es a tongue cutter with opposing shear angles to ensure a flawless finish. • Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and gr oove widths of 7/32" to 3/8". • Cuts all composition materials, plywoods, hardwoods, and softwo ...
-
Freud Joinery Router - page 15
170 ROUTER BITS & SETS Joiner y Bits Raised Panel “V” Joint Bit • Mating surfaces are at an angle, not vertical, so the dark lines like those cr eated by standard finger joint bits ar enot visible. • Bit does not have to be centered in the wood. • Simply raise or lower the bit 3/32" to route the mating edge. • Cuts all composit ...
-
Freud Joinery Router - page 16
Finger Joint Bit • Produces a joint that is str onger than the wood itself. • Tips on each side of the bit are of fset, cutting twice as many fingers as you see tips on each side of the bit. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as table-mounted portable r oute ...
-
Freud Joinery Router - page 17
172 ROUTER BITS & SETS Joiner y Bits V ariable Height Finger Joint Bit • Ideal for joining wood edge-to-edge or end-to-end, because the joint produced is stronger than the wood itself. • Replacement cutters available and uses arbor #60-152. • Allows you complete freedom when pr oducing finger joints. • Cuts all composition materials, pl ...
-
Freud Joinery Router - page 18
“V” Panel Bit Set • Set includes spacers that allow you to produce “V” paneling fr om 1/2", 3/4", or 1" thick stock. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on table-mounted portable routers. Application: Creating attractive “V” Gr oove paneling 173 ROUTER BITS & SETS Joiner y ...
¿Tienes una pregunta acerca de Freud Joinery Router?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Freud Joinery Router, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Freud Joinery Router probablemente compartirá una forma de solucionarlo.