-
OEM Systems CH-4100 - page 1
CH-4100 4.5" TOUCH SCREEN DISPLA Y OPERA TION MANU AL D VD MUL TIMEDIA RECEIVER ...
-
OEM Systems CH-4100 - page 2
2 Safety Information .......................................................................................................... 3 Care and Installation ...................................................................................................... 4 Wiring Diagram .............................................................................. ...
-
OEM Systems CH-4100 - page 3
3 3 WARNINGS to pr e v ent injury or dama g e to unit: This model incorporates a motorized moving monitor . Before final installation make sure the monitor will not obstruct the dash, shifter or any other controls. The Y ellow/Blue lead must be connected to the brake switch circuit in order for the in-dash video safety feature to function properly ...
-
OEM Systems CH-4100 - page 4
4 Car e and Maintenance T o clean the monitor or front panel, wipe only with a dry silicone cloth or soft cloth and neutral detergent. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing. It is recommended to use a cleaning disc in this unit more freq ...
-
OEM Systems CH-4100 - page 5
5 iPOD XM DA TA XM AUDIO LEFT/RIGHT AM/FM ANTENNA P ARKING BRK (-) A/V AUX IN SUBWOOFER BACK-UP CAM VIDEO OUTPUT 2 BLUE / WHITE POWER ANTENNA AMP REMOTE BLACK WHITE / BROWN GROUND REVERSE D RE *ACC EMERGENCY BRAKE SWITCH Parking Lamp OPTIONAL POWER AMPLIFIERS 20A YELLOW / BLUE OPTIONAL BACKUP CAMERA iPod (NOT INCLUDED) XM DIRECT TUNER AND ANTENNA ( ...
-
OEM Systems CH-4100 - page 6
6 Contr ols EJECT - Press once for DISC ejection MUTE - Press once to MUTE audio, press again to return audio. The volume icon will change. VOL / SMAR T DIAL - Rotate knob Q or P for desired VOL UME level. Rotate clockwise/counter clockwise to select desired item in any MODE and press once to ENTER . Press and hold to access A UDIO menu. PLA Y/P A ...
-
OEM Systems CH-4100 - page 7
7 R emote Contr ol Mode - Press once to select between TUNER, D VD , A V1, CAMERA, XM, NA V , BL UETOO TH and iP od inputs. Mute - Press once to MUTE or restore Audio Open/Close - Open or Close Monitor Power-Power ON/OFF V olume Up - Increase volume V olume Down - Decrease volume Info - Displays system information Band/Stop - Increment B AND or STO ...
-
OEM Systems CH-4100 - page 8
8 Multi-Zone R emote R-SRC - Selected playing sources Mute - T oggle on/off audio output GOTO search - Search function in the V CD/ D VD disc Root - Main D VD disc menu Up/Down/Left/Right - Navigating system for selection. Next - Select the next chapter/track for playback. Search an available radio station by increasing tuning frequency in tuner mo ...
-
OEM Systems CH-4100 - page 9
9 Safe Monitor Oper a tion The vehicle must be in park and the parking brake applied to view video on the in-dash monitor . The video display of the in-dash unit will not operate while the vehicle is moving. As a safety feature, a blue “ P ARKING ” screen will show on the display when the vehicle's parking brake is not engaged. D VD , A V1 ...
-
OEM Systems CH-4100 - page 10
10 Gener al Oper a tion P ower On / Of f Press the VOL/SMAR T DIAL once to turn on the unit. Once on, press to MUTE sound, press again to restore sound. T o turn off, press and hold. The unit can also be turned on using the remote. V olume Adjustment Adjust the V olume using the VOL/SMAR T DIAL knob or the remote to adjust the volume to the desired ...
-
OEM Systems CH-4100 - page 11
1 1 Main Access Menu The MAIN menu can be access by pressing the MENU button on the remote or by touching the Area A (upper left hand side) on the monitor . T ouc h Access Buttons T ouch to access AM/FM TUNER mode. T ouch to access CD/D VD mode, CD/DVD must be inserted. T ouch to access XM MODE. ( XM Receiver must be connected to activate). T ouch ...
-
OEM Systems CH-4100 - page 12
12 GENERAL Setup Menu T a ble Adjusting TUNER F requenc y T ouch Ar ea A to access T ouch GENERAL Setup button T ouch USA GENERAL MENU T ouch setting for your country T ouch arrow to EXIT Gener al Set Up Menu Settings Default Options Function Radio USA USA Korea Set to appropriate setting for your Country S-AMER1 China S-AMER2 Arabia Europe Clock a ...
-
OEM Systems CH-4100 - page 13
13 12 or 24 Hour Cloc k Mode T ouch Area A of screen T ouch GENERAL setup button T ouch AM or PM to set T ouch 00 :00 area in the CL OCK row to set the hour . Keypad should appear . Enter correct hour . T ouch arrow to EXIT setup If you desire 24Hr format, select 24Hr from CL OCK MODE T ouch OK . T ouch 00: 00 area. Enter correct minutes. Adjusting ...
-
OEM Systems CH-4100 - page 14
14 Scr een Setup Functions T ouc h Scr een Calibra tion It may become necessary to recalibrate the touch screen. T ouch Area A T ouch SCREEN Setup Button T ouch NO in TS Calibra tion Then press YES T ouch and hold point A T ouch and hold point B Then touch and hold point C T ouch and hold point D T ouch arrow to EXIT Settings Default Options Functi ...
-
OEM Systems CH-4100 - page 15
15 Audio Signal Pr ocessing (ASP) O pe r a t io n Settings Default Options F unction Bass Freq 60 Hz 60Hz, 80Hz, 100Hz, 130Hz, 150Hz, 200Hz Select the desired frequency to obtain the best bass effect. T reble Freq 15KHz 10KHz, 12.5KHz, 15KHz, 17KHz Select the desired frequency to obtain the best bass effect. Sub Filter 80Hz 80Hz, 120Hz, 160Hz Sets ...
-
OEM Systems CH-4100 - page 16
16 AM/FM T uner Oper a tion * iPod, XMD1000™ T uner Module and SNA V -1 must be connected to appear in the MODE selection string. (XMD1000™ and SNA V -1 each sold separately) 5 6 7 4 1 2 3 8 9 10 14 13 12 1 1 18 17 16 19 15 Current souce MODE . T ouch to access MAIN menu. TUNER, D VD , XM*, iP od*, CAMERA, Bluetooth, NA Vi*, A UX are indicated ...
-
OEM Systems CH-4100 - page 17
17 Auto Seek T uning Press the button to auto SEEK up the next strongest station. Press the button to auto SEEK down the next strongest station. Manual T uning Press the button to manually tune up one step at a time. Press the button to manually tune down one step at a time. Auto Stor e (As) Press and hold AS/PS for more than 2 seconds to automatic ...
-
OEM Systems CH-4100 - page 18
18 Symbol 12cm Disc Properties Max Play T ime Single side single layer (DVD-5) (MPEG 2 Method) Single side double layer (DVD-9) 133 minutes Double side single layer (DVD-10) 242 minutes Double side double layer (DVD-18) 484 minutes Single side single layer (VCD) (MPEG1 Method) 74 minutes Single side single layer 74 minutes Symbol Meaning Number of ...
-
OEM Systems CH-4100 - page 19
19 SAFETY WARNING The video display of the in-dash unit will not operate while the vehicle is moving. As a safety feature, “ENG AGE P ARKING BRAKE ” blue screen will show on the display when the vehicle's parking brake is not engaged. Video display on the front monitor isn't allowed until the P ARKING BRAKE is active, however , DVD an ...
-
OEM Systems CH-4100 - page 20
20 D VD Loading Slot Inserting a DISC When inserting a D VD disc, it will play automatically . Other sub-menus may have to be pressed to access the D VD movie / music content, read the directions of your specific DVD disc for hidden features. Ejecting the DISC Press the EJECT button R esetting the Loading Mechanism If the disc loads abnormally or a ...
-
OEM Systems CH-4100 - page 21
21 D VD Contr ols T ouch the PL A Y button or on the front panel to resume disk playback. T ouch the P A USE button again to suspend the disc playback. T ouch button to STOP playback, touch or OK on the remote to resume playback. T ouch the REVERSE button to F AST REVERSE on DVD , 2x, 4x, 8x to 20x . T ouch the FF button to F AST FORWARD on D VD , ...
-
OEM Systems CH-4100 - page 22
22 Sear ching a D VD T ouch the search button in AREA F . Sear ching b y Time , Title or Chapter T ouch the in the TIME area. A touch keypad will now appear , enter your desired TIME to search. Enter OK . Dir ect Chapter / T rac k Selection During D VD and CD playback, you can use the numeric keypad on the IR remote to access tracks directly Vie wi ...
-
OEM Systems CH-4100 - page 23
23 Languag e Setup Menu With the monitor open in D VD mode and a DISC inserted, press the AREA A (top left screen) to display the MAIN menu bar . Press D VD Setup to access the DVD setup menu. Press L ANGU AGE icon to select LANGU AGE setup page . Indicates current source playing. Indicates that the fourth of sixteen title on the D VD is currently ...
-
OEM Systems CH-4100 - page 24
24 Video Setup Men u With the monitor open in D VD mode and DVD disc inserted, press the AREA A (top left screen) to display the MAIN menu bar . Press D VD Setup to access the D VD setup menu. Press VIDEO icon to select from the following menus: TV Shape Press to select desired TV Shape . Angle Mar k Press to select desired Angle Mar k. Video Mode ...
-
OEM Systems CH-4100 - page 25
25 D VD Setup Menu - R a tings Ra tings Setup Menu With the monitor open in D VD mode and a DVD Disc inserted, press the AREA A (top left screen) to display the MAIN menu bar . Press D VD Setup to access the D VD setup menu. Press RA TING icon to select from the following menus: Enab le P arental Loc k P ass wor d Press ---- to enter a your desired ...
-
OEM Systems CH-4100 - page 26
26 Downmix (2 channel) Settings Of f = Default Left Right Full 6CH (6 channel) settings T ouch arrow to exit Dynamic Range Control Of f = Default On Center Channel T ime Delay , in milliseconds 5ms 4ms 3ms 2ms 1ms 0ms = Default Rear Channel T ime Delay , in milliseconds 15ms 12ms 9ms 6ms 3ms 0ms = Default Down Sampling* Off = Default On D VD Setup ...
-
OEM Systems CH-4100 - page 27
27 D VD Setup Menu - Speak er Speak er Setup Menu With the unit in D VD mode, press Area A to display the MAIN menu. Press D VD Setup to access the D VD setup menu. Press the SPEAKER button to access the following menus: D V D Settings Default Options Function Speaker Mode DownMix Full 6CH 6-channel mode DownMix 2-channel mode. The selections below ...
-
OEM Systems CH-4100 - page 28
28 D VD Setup Menu - Sur rr ound I Speak er Setup Menu With the unit in D VD mode, press Area A to display the MAIN menu. Press D VD Setup to access the D VD setup menu. Press the SPEAKER button to access the following menus: Decode Mode Off Surround Matrix Movie Music Dimension* 0 1 2 3 = Default 4 5 6 Changing the dimension control allows you to ...
-
OEM Systems CH-4100 - page 29
29 Media Compa tibility The following types of discs/files are compatible: CD-ROM (ISO), CD-R, CD-RW , DVD+R/RW , DVD-R/RW , DVD-R/DL CD-DA, DVD Video MP3 data WMA data The following types of discs/files are not compatible: WMA files that are protected by DRM (Digital Rights Management) WMA lossless format Discs recorded with T rack At Once or pack ...
-
OEM Systems CH-4100 - page 30
30 Ra tings Setup Menu After inserting a CD disc, files will play in numerical order in the directory . T ouch to playback track T ouch for DIRECT TRA CK access T ouch to view UP / DOWN pages of available TRA CKS Current source indicator , touch AREA A to access MAIN source menu Disc title. T rack title. Current TIME . T ouch to activate / deactiva ...
-
OEM Systems CH-4100 - page 31
31 Playing MP3/WMA F iles After inserting a CD disc, files will play in numerical order in the directory . T ouch to playback single track T ouch to for DIRECT TRA CK access T ouch to view UP / DOWN pages of available TRACKS Current source indicator , touch AREA A to access MAIN source menu Disc title. T rack title. Current TIME. T ouch to PLA Y / ...
-
OEM Systems CH-4100 - page 32
32 Playing iP od Files After connecting an iPod, files will play in numerical order in the directory . T ouch to playback single SONG T ouch for DIRECT SONG access T ouch to view UP / DOW N pa ge s of av a il ab l e Current source indicator , touch AREA A to access MAIN source menu Disc title. T rack title. Current TIME . T ouch to PLA Y / P A USE ...
-
OEM Systems CH-4100 - page 33
33 Selecting Music By: Playlist Artist Album Genre Song T ouch desired Folder , music will begin to play after selection. Dir ect Song Access T ouch the Keypad icon, keypad will appear . Enter the desired song you wish to play . Enter OK . • • • • • 1) 2) 3) iP od Oper a tion Playing Photo or V ideo File F r om iP od Make sure the followi ...
-
OEM Systems CH-4100 - page 34
34 Activa ting Y our XM Receiv er (when connected): T ouch top left corner of screen. T ouch to access XM MODE , XM R eceiver must be connected to activate V erify channel 1 ( XM Preview Channel) is playing. Select Channel 0. The XM receiver’s eight character Radio ID number will appear on the CH-4100 display . The Radio ID number is also located ...
-
OEM Systems CH-4100 - page 35
35 T uning Modes T ouch to select between XM, XM1, XM2 and XM3 bands. Channel Slection T ouch momentarily to select the next available channel. Storing and R ecalling Preset Channels Up to 48 XM channels can be stored. T o store a channel, select XM, XM1, XM2 or XM3 band and the desired channel. Press and hold the desired preset button (1-12) for m ...
-
OEM Systems CH-4100 - page 36
36 Bluetooth Oper a tion Activa ting Bluetooth Opera tion Select Bluetooth option in the General Setup (see page 1 1 to access General Setup) and select ON to activate the Bluetooth feature. From the Main Menu, touch the Bluetooth icon on the screen. Displays current mode. Press T alk Button to answer an incoming call or to place an outgoing call. ...
-
OEM Systems CH-4100 - page 37
37 Bluetooth Oper a tion Bluetooth Setup P airing Access Bluetooth setup menu and press YES option on the screen, then "W ait Pairing..." will display . Now you can pair a mobile device with the unit. When prompted by your mobile device, enter 1234 for the PIN or pass code. After the pairing process has completed, the Bluetooth icon will ...
-
OEM Systems CH-4100 - page 38
38 Na vig a ting Oper a tion Accessing Na viga tion Access the MAIN menu by pressing the NA VI button on the front panel, pressing the SRC button on the front panel or touching Ar ea A or the upper left hand corner of the screen and select the NA VI button to enter the Navigation Operation interface. Na viga tion Opera tion Please refer to the SNA ...
-
OEM Systems CH-4100 - page 39
39 Multi-Zone Oper a tion Multi-Zone Oper ation Independent sources can be played simultaneously on the unit. For example, the AM/FM tuner can be selected for the front zone, while the D VD video is selected for the Mult-Zone source (for headrest monitors, overhead monitors, etc.) Multi-Zone Menu Access The MAIN menu can be access by pressing the M ...
-
OEM Systems CH-4100 - page 40
40 Multi-Zone AM/FM T uner 1 13 12 1 1 3 2 4 5 9 10 8 7 6 M ul t i- Zo n e Indicator for MAIN ZONE Displays current time on CL OCK INDICA TOR Indicator for MUL TI-ZONE Page up/down arrow for PRESET P AGE Shows the preset station list by frequency for the PRESET NUMBER LIST DISPLA Y . T ouch and hold frequency to store presets. T ouch the TUNER SCAN ...
-
OEM Systems CH-4100 - page 41
41 Multi-Zone XM R adio 3 2 4 5 8 7 6 1 12 10 1 1 9 M ul t i- Zo n e Indicator for MAIN ZONE Displays current time on CL OCK INDICA TOR Indicator for MUL TI-ZONE Displays the CHANNEL NAME Displays the TITLE of the current song T ouch CHANNEL SCAN to scan through all available available channels, pausing for 10 seconds on each channel. T ouch again ...
-
OEM Systems CH-4100 - page 42
42 Multi-Zone iP od 3 2 4 5 9 10 8 7 6 1 13 12 1 1 M ul t i- Zo n e Indicator for MAIN ZONE Displays current time on CL OCK INDICA TOR Indicator for MUL TI-ZONE Displays the TIME ELAPSED of the current song Displays the NAME of the artist for the current song T ouch SONG SCAN to scan through all available available songs, pausing for 10 seconds on ...
-
OEM Systems CH-4100 - page 43
43 Limited One Y ear W arranty Applies to Multimedia Headunits Who is cov ered? PRIORITY AUDIO (the Company) extends this warran- ty to the original retail purchaser of products purchased through an authorized PRIORITY AUDIO retailer in the U.S.A. or Canada. This warranty is not transferable or assignable. Wha t is cover ed? The Company warrants th ...
-
OEM Systems CH-4100 - page 44
44 Pr oblem Cause Solution Unit will not turn on (no power) Y ellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (1 1~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse Unit has power (but no sound) Speaker wires not connected Check connectio ...
-
OEM Systems CH-4100 - page 45
45 Pr oblem Cause Solution OFF AIR appears on display The selected channel is not in service The antenna cable is damaged T ry another channel Check for pinched or cut antenna cable No song title or artist name is displayed This information may not be available for some music channels, news channels, or when there is no song playing This condition ...
-
OEM Systems CH-4100 - page 46
46 Notes ...
-
OEM Systems CH-4100 - page 47
Specif ica tions Gener al Operating voltage: 1 1-16 VDC, neg. gnd Speaker output impedance: 4~8 ohms Line output voltage: 2 V olts Line output impedance: 200 ohms Chassis dimensions: 2" x 7" x 7" (51 x178 x178 mm) FM T uner T uning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ ...
-
OEM Systems CH-4100 - page 48
OE RADIO T oll Free: 1-877-305-8972 www .oeradio.com ©2007 PRIORITY AUDIO All rights reserved. ...
¿Tienes una pregunta acerca de OEM Systems CH-4100?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con OEM Systems CH-4100, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con OEM Systems CH-4100 probablemente compartirá una forma de solucionarlo.