-
GN Netcom GN9010-BT - page 1
GN9020-D Digital Wireless System GN9010-BT Bluetooth™ Wireless System User Guide ...
-
GN Netcom GN9010-BT - page 2
...
-
GN Netcom GN9010-BT - page 3
Assembling 1 Connect all cords. 2 Attach the base station to the stand. Charging the Batter y 3 Insert the headset into the base station (either side can be used). The battery charging indicator on the base illuminates. 4 The headset battery is not charged when delivered. Place the headset in the base for 3 hours before making the following adjustm ...
-
GN Netcom GN9010-BT - page 4
Checking the System 5 If your telephone has volume control, set the volume in the middle position. 6 P ress the headset/handset selector to switch on the headset. The headset mode indicator on the base station illuminates. 7 The headset mode indicator on the headset begins flashing within 10 seconds. If the headset mode indicator does not flash, re ...
-
GN Netcom GN9010-BT - page 5
Adjusting the Micr ophone V olume 14 P ut on the headset. 15 P ress the headset/handset selector to switch to handset mode. 16 Call someone using your handset and ask the person to help you evaluate the volume of your v oice. 17 U sing the headset/handset selector to toggle back and forth between handset and headset mode, adjust the microphone volu ...
-
GN Netcom GN9010-BT - page 6
Answ ering and Placing Calls 19 P ut on the headset. 20 Set the headset/handset selector to headset position. 21 Lift the handset from the phone. Answer or place the call. 22 Y ou can now mo ve freely away from the base station. If you move out of transmission range, you will hear a beep in the headset every 10 seconds. 23 T o end the call, replace ...
-
GN Netcom GN9010-BT - page 7
Adjusting the Receive V olume 24 T o increase or decrease the volume, press the upper (+) or lower (-) part of the oval volume contr ol on the headset. When the volume reaches maximum or minimum, you will hear a beep in your headset. Muting the Micr ophone 25 T o talk without the other party hearing you, press the mute button on the headset. When t ...
-
GN Netcom GN9010-BT - page 8
Comfort Adjustments 28 Y ou can wear the headset on your right or left ear , whichever side you prefer . T o switch sides, simply rotate the microphone boom below the headband. NO TE: Do not force the boom over the top of the headset. 29 Adjust the length of the headband so the headset rests com- fortably on your head. The stabilizer should be plac ...
-
GN Netcom GN9010-BT - page 9
Fr equently Ask ed Questions Wh y can’ t I hear a dial tone? • Check that all cords are connected corr ectly . • Be sure the AC po wer adapter is plugged in and power is turned on. • Be sure the headset/handset selector is in headset position and the headset mode indicators are illuminated. • Be sure the battery is fully charged. • Be s ...
-
GN Netcom GN9010-BT - page 10
Cautionar y Notes to Computer Users When using any headset with a computer , care should be taken in dr y or low humidity environments to pr otect the user from electrostatic discharge from the monitor (CR T). Computer monitors can induce a substantial electrostatic charge when turned on or off, or when there is a po wer failure, and the resulting ...
-
GN Netcom GN9010-BT - page 11
Safety Instructions • N ever try to dismantle the product yourself. N one of the internal components can be repaired by users. • Do not expose the headset to rain or other liquids. • The headset is equipped with a rechargeable N iMH batter y (nickel-metal-hydride). F or battery replacement, please contact your distributor or reseller . ...
-
GN Netcom GN9010-BT - page 12
FCC Notice to Users U pon request only , you must notify your telephone utility company (telco) of your intention to install or permanently remo ve an FCC P art 68 registered device or system. Include the FCC R egistration Number and the Ringer Equiv alence Number (REN) located on the amplifier label. The telco has the right to make changes to thei ...
-
GN Netcom GN9010-BT - page 13
IC Notice to Users The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requir ement as prescribed in the appropriate T erminal Equipment T echnical Resource Document(s). The department does not guarantee the equipment will operate t ...
-
GN Netcom GN9010-BT - page 14
W arranty GN N etcom, Inc. warrants this product against all defects in material and workmanship for a period of one year from the date of original purchase. The conditions of this warranty and our responsibilities under this warranty are as follo ws: • The warranty is limited to the original purchaser . • The warranty is void if the serial num ...
-
GN Netcom GN9010-BT - page 15
T o Obtain Ser vice F or customer service and technical suppor t, call GN N etcom, Inc. at 1-800-826-4656. If it becomes necessary to send a unit in for repair , it is not necessar y to call for a Return M aterial Authorization (RMA) number , as one will be assigned upon receipt of the package at the factory . Ship the product in a suitable shippin ...
-
GN Netcom GN9010-BT - page 16
77 N ortheastern Blvd. • N ashua, NH 03062 USA 1-800-826-4656 • www .gnnetcom.com 1555-769 Printed in USA September 2000 ...
¿Tienes una pregunta acerca de GN Netcom GN9010-BT?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con GN Netcom GN9010-BT, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con GN Netcom GN9010-BT probablemente compartirá una forma de solucionarlo.