-
Sanyo PLV-Z1X - page 1
Multimedia Pr oject or MODEL PL V -Z1X Owner ’ s Manual ...
-
Sanyo PLV-Z1X - page 2
2 F eatures and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technol- ogy. ◆ Compatibility The projector widely accepts various video and c ...
-
Sanyo PLV-Z1X - page 3
3 T able of Contents TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation. ● Each name of corporations o ...
-
Sanyo PLV-Z1X - page 4
4 CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPER ...
-
Sanyo PLV-Z1X - page 5
5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m ...
-
Sanyo PLV-Z1X - page 6
6 Safety Instructions CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR – Do not drop or bump a projector, otherwise damages or mal- functions may result. – When carrying a projector, use a suitable carrying case. – Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause dam- age to ...
-
Sanyo PLV-Z1X - page 7
7 Compliance AC Po wer Cord f or the Unit ed Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the plu ...
-
Sanyo PLV-Z1X - page 8
8 !2 !3 !4 !5 q w e r t u y i o !0 !1 G B R Bottom !6 Adjustable Feet !7 Lamp Cover !8 Air Intake Vent (back and bottom) !9 Air Filter @0 RGB Panel Cleaning Holes !9 !6 !8 !7 !2 Power Cord Connector !3 Main On/Off Switch !4 Air Intake Vent !5 Terminals and Connectors q Exhaust Vent CAUTION Hot air is exhausted from the exhaust vent. Do not put heat ...
-
Sanyo PLV-Z1X - page 9
9 Pa rt Names and Functions A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively. q D-sub RGB Connect computer output, component output or RGB Scart 21-Pin v ...
-
Sanyo PLV-Z1X - page 10
10 Pa rt Names and Functions POWER WARNING LAMP REPLACE MENU INPUT SELECT ON-OFF To p q w e r t y u i i INPUT button Select input source. (p23, 25, 32) t MENU button Open or close the On-Screen Menu. (p21) e WARNING indicator Light red when the projector detects abnormal condition. This also flashes red when the internal temperature of the projecto ...
-
Sanyo PLV-Z1X - page 11
11 Pa rt Names and Functions LL LIGH T LAMP MENU SCREEN IMAGE ADJ. SELECT USER SETTING COMPONENT CLEAR DARK U - 1 U - 2 U - 3 U - 4 S-VIDEO VIDEO COMP. PC LAMP MODE INPU T Remote Contr ol q w r u !0 !3 o SCREEN button Select a screen size. (p30, 31, 39) !3 AUTO PC button Operate the Auto PC adjustment function. (p34) r POINT (UP/DOWN/LEFT/RIGHT) bu ...
-
Sanyo PLV-Z1X - page 12
12 Pa rt Names and Functions To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or LR06 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote control to moisture, or heat. ● Do ...
-
Sanyo PLV-Z1X - page 13
13 Projection angle can be adjusted up to 11.8 degrees with the adjustable feet. Lift the front of the projector and pull the feet lock latches on both sides of the projector. 1 Adjustable Feet Feet Lock Latches Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 2 To retract the ...
-
Sanyo PLV-Z1X - page 14
14 Installation The projection lens can be moved up, down, left, and right with the manual lens shift function. This function makes it easy to provide a projected image where you want. V V uppermost W 1/2W Lens Shift Ring (Left/Right) Turn the lens shift ring (left/right) left/right to move the lens leftward / rightward. Turn the lens shift ring (u ...
-
Sanyo PLV-Z1X - page 15
15 NO TE ON THE POWER CORD AC power cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer. Installation To power cord connec- tor on your projector. Pr oject or side AC ...
-
Sanyo PLV-Z1X - page 16
16 Installation Connecting to Video Equipment (Video, S-Video) Video Equipment S-Video Cable S-VIDEO Output NOTE When connecting the cable, the power cords of both the projec- tor and the external equipment should be disconnected from AC outlet. S-VIDEO VIDEO Composite Video Output Video Cable (RCA x 1) Video, S-Video Use the supplied Video cable o ...
-
Sanyo PLV-Z1X - page 17
17 Installation RGB Scart Use a Scart-VGA cable (option). Video Equipment D-sub RGB RGB Scart 21-pin Output Scart-VGA Cable VGA Cable IBM-compatible or Macintosh computer Monitor Out Connecting to a Computer Computer (Analog) Use a VGA cable (commercially available). NOTE When connecting the cable, the power cords of both the projector and the exte ...
-
Sanyo PLV-Z1X - page 18
18 Connect the projector's AC power cord into an AC outlet and open the front cover. Turn the Main On/Off switch on, and the POWER indicator flashes red in a moment and turns on red. (If the front cover is being closed, the POWER indicator light orange.) Press the POWER ON-OFF button on the top control or on the remote control. The POWER indic ...
-
Sanyo PLV-Z1X - page 19
19 Basic Operation Move the Zoom Lever to zoom in and out. Rotate the Focus Ring to adjust the projected picture focus. Zoom Lever Focus Ring Move the Aperture Lever to adjust contrast. Aperture Lever Basic Operation Lamp Mode Selection LL LIGH T LAMP MENU SCREEN SELECT LAMP MODE Desired lamp mode can be selected according to video signal. (p42) LA ...
-
Sanyo PLV-Z1X - page 20
20 Basic Operation Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The message disappears after 4 seconds. No Sho w Function If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment. • The arrows are white when ...
-
Sanyo PLV-Z1X - page 21
21 MENU SCREEN IMAGE ADJ. SELECT INPUT Basic Operation Press the MENU button to display the On-Screen Menu (Main Menu). Select a menu from the main menu by pressing the Point Up/Down button, and press the Point Right button to enter the sub-menu. (The selected icon turns yellow.) Press the MENU button to close the On-Screen Menu when you are select ...
-
Sanyo PLV-Z1X - page 22
22 Basic Operation Menus VIDEO MENUS COMPUTER MENUS Input Menu: selects video input source. (p23-25) AV System Menu: selects video system from AUTO, PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N, 1080i, 1035i, 720p, 575p, 480p, 575i, 480i. (p26) Image Select Menu: selects image level from Cinema, Natural, Video, Dynamic, and User image 1 ~ 4. (p27) Imag ...
-
Sanyo PLV-Z1X - page 23
23 Input 1 Input 2 INPUT button Input Source Selection (INPUT 1 T erminal / Video, S-Video, Component) Choose Input 1 by pressing the INPUT button on the top control or on the remote control. Before using these buttons, correct input source should be selected through the Input button on the remote control or through menu operation as described on t ...
-
Sanyo PLV-Z1X - page 24
24 Video Input Select the Input Menu with the Point Up/Down button, and then press the Point Right button to enter the sub-menu. Select Input 1 with the Point Up/Down button and then press the Point Right button. The Source Select Menu will appear. 1 2 Move the pointer to the source that you want to select and then press the SELECT button. 3 Menu O ...
-
Sanyo PLV-Z1X - page 25
25 Video Input Input 2 Input 1 INPUT button Input Source Selection (INPUT 2 T erminal / Component, RGB Scar t) Choose Input 2 by pressing the INPUT button on the top control or on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Direct Operation MENU INPUT SELECT LAMP ...
-
Sanyo PLV-Z1X - page 26
26 Video Input AV System Menu (Video or S-Video) AV System Menu (Component) Select the AV System Menu with the Point Up/Down button, and then press the Point Right button to enter the sub-menu. Choose the system that you want to select with the Point Up/Down button and then press the SELECT button. 1 2 If the projector cannot reproduce proper video ...
-
Sanyo PLV-Z1X - page 27
27 Video Input Select the Image Select Menu with the Point Up/Down button, and then press the Point Right button to enter the sub-menu. 1 2 Choose the level that you want to select with the Point Up/Down button and then press the SELECT button. Image Select Menu To enjoy contrasting 3D images. Cinema To enjoy faithfully reproducted images without a ...
-
Sanyo PLV-Z1X - page 28
28 You can adjust the items in the Image Level Adjustment menu with pressing the IMAGE ADJ. button on the remote control. Press IMAGE ADJ. button to display the adjustment bar. Adjust each item with Left/Right button. Press Up/Down button to select to the item to adjust. Press IMAGE ADJ. button again to close the adjustment bar. Video Input Select ...
-
Sanyo PLV-Z1X - page 29
29 Video Input To store the adjustment data, select Store and press the Point Right button. The Image Level Menu will appear. Choose one of 4 image levels with the Point Up/Down button and press the SELECT button. A confirmation box will appear and select [Yes]. The Image Level Menu will appear. Choose one of 4 image levels with the Point Up/Down b ...
-
Sanyo PLV-Z1X - page 30
30 You can resize the projected screen with pressing the SCREEN button on the remote control. Each time you press the SCREEN button you can change the screen size among Full, Full through, Zoom, Caption in 1, Caption in 2, Normal, Normal through, Natural wide. Video Input Select the Screen Menu with the Point Up/Down button, and then press the Poin ...
-
Sanyo PLV-Z1X - page 31
31 Video Input ✔ Note: • Normal through and Natural wide cannot be selected after adjusting keystone dis- tortion. (p20) • Screen Menu cannot be selected when “720p”, “1035i”, or “1080i” is selected in the AV System Menu (p26). Provides an image with no modification. (You can enjoy a high-quality image though the projected image i ...
-
Sanyo PLV-Z1X - page 32
32 Choose INPUT 2 by pressing the INPUT button on the top control or on the remote control. By pressing PC button on the remote control, Computer input (input 2) can be quickly selected. Before using these buttons, correct input source should be selected through menu operation as described below. Select the Input Source Selection Menu with the Poin ...
-
Sanyo PLV-Z1X - page 33
33 Computer Input This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment function provided in the projector. When selecting computer input, the projector automatically displays the most proper image for the input signal. One of the following four displays appears on the system menu icon. ...
-
Sanyo PLV-Z1X - page 34
34 Computer Input The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to con- form to your computer. This function can be operated as follows. Select the PC Adjust Menu with the Point Up/Down button, and then press the Point Right button to enter the sub-menu. 1 2 Choose the AUTO PC Ad ...
-
Sanyo PLV-Z1X - page 35
35 Computer Input Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. This projec- tor has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats. The pro- jector has 5 independent memory areas to memorize those parameters manually adjusted. Thi ...
-
Sanyo PLV-Z1X - page 36
36 Computer Input Select the resolution at the Display area dialog box. Display area Adjusts the horizontal area displayed by this projector. Press the Point Left/Right button to decrease/increase value and then press the SELECT button. Display area H Adjusts the vertical area displayed by this projector. Press the Point Left/Right button to decrea ...
-
Sanyo PLV-Z1X - page 37
37 Computer Input This check shows the level being selected. Image Lev el Selection Direct Operation Menu Operation Image Select Menu Select the Image Select Menu with the Point Up/Down button, and then press the Point Right button to enter the sub-menu. 1 2 Choose the level that you want to select with the Point Up/Down button and then press the S ...
-
Sanyo PLV-Z1X - page 38
38 Computer Input Image Lev el Adjustment Select the Image Adjust Menu with the Point Up/Down button, and then press the Point Right button to enter the sub-menu. 1 2 Select an item with the Point Up/Down button and press the Point Left/Right button to adjust the item. Press the Point Left button to decrease contrast and the Point Right button to i ...
-
Sanyo PLV-Z1X - page 39
39 Computer Input When Digital zoom is selected, the On-Screen Menu disappears and the message “D.Zoom” is displayed. Press the SELECT button to expand the image. And press the POINT UP/DOWN/LEFT/RIGHT but- ton(s) to pan the image. The panning function can work only when the original image is larger than screen size (960 x 540). Full Digital zo ...
-
Sanyo PLV-Z1X - page 40
40 Keystone Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese. Display This function decides whether to display On-Screen Displays. On ···· shows all the On-Screen Displays. Off ···· does not show On-Screen Displays ex ...
-
Sanyo PLV-Z1X - page 41
41 Setting For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the input signal is interrupted and no button is pressed for 30 seconds or more. When the input signal is interrupted and no button is pressed for 30 seconds or more, the timer display with the message &qu ...
-
Sanyo PLV-Z1X - page 42
42 Setting This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 47 for operation. Lamp counter reset Remote control This projector has two different remote control codes: Code 1 (initial code) and Code 2. This switching function prevents remote c ...
-
Sanyo PLV-Z1X - page 43
43 The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. POWER WARNING LAMP REPLACE WARNING flashing red TOP CONTROL W arning Indicator The projector is shut down and the WARNING indicator is flashing red When the temperature i ...
-
Sanyo PLV-Z1X - page 44
44 Maintenance and Cleaning Turn off the projector and disconnect the AC power cord from the AC outlet. Turn over the projector. Put the projector on a soft cloth not to scratch the surface. 1 2 The air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air fil - ters become clogged with d ...
-
Sanyo PLV-Z1X - page 45
45 Disconnect the AC power cord before cleaning. When the projector is not in use, replace the lens cover. 1 3 2 Follow these steps to clean the projection lens. Cleaning the Pr ojector Cabinet Disconnect the AC power cord before cleaning. 1 Softly wipe the projector body with a soft, dry cleaning cloth. When it is heavily soiled, use a small amoun ...
-
Sanyo PLV-Z1X - page 46
46 Maintenance and Cleaning When the life of the projection lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yel- low, replace the lamp with a new one promptly. Follow these steps to replace the lamp. Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When order ...
-
Sanyo PLV-Z1X - page 47
47 Maintenance and Cleaning Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP REPLACE indicator stops lighting. Turn the projector on, press the MENU button, and the On- Screen Menu will appear. Select the Setting Menu with the Point Up/Down button and press the Point Right button ...
-
Sanyo PLV-Z1X - page 48
48 Cleaning the RGB panels If some dusts attach to optical parts inside the projector, the brightness could decrease or shadows could appear on the screen and image deterioration could result. This projector equipped with RGB panel cleaning holes on the bottom of the projector to clean the internal parts (such as optical parts) of the projector. Wh ...
-
Sanyo PLV-Z1X - page 49
49 Maintenance and Cleaning Press MENU button to display the On-Screen Menu and select the Setting menu by pressing the Point Up/Down button. Then press Point Right button to enter the sub-menu. 1 Turn over the projector then pull one of the hole covers upward gently. 2 Put the blower nozzle in the hole. 3 When finishing, pull the blower out and pu ...
-
Sanyo PLV-Z1X - page 50
50 Tr oubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described in “Connecting to Video Equipment” and "Connecting to a Computer" on page16 and 17. – Make sure all equipment is connected to ...
-
Sanyo PLV-Z1X - page 51
51 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Appendix W ARNING : High voltag es are used t o oper ate this pr ojector . Do not at t empt t o open the cabinet. If problems still p ...
-
Sanyo PLV-Z1X - page 52
52 Appendix Check the indicators for projector condition. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp. See page 48 and 49. Indicator s and Pr oje ...
-
Sanyo PLV-Z1X - page 53
53 Appendix Menu T ree Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N V ideo Input Auto 1080i 1035i 720p 575p 480p 575i 480i Cinema Natural Video User Image 1 User Image 2 User Image 3 -31 ~ +31 -31 ~ +31 -31 ~ +31 -31 ~ +31 Off Image Select System (2) System (1) Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store Gamma Prog ...
-
Sanyo PLV-Z1X - page 54
54 Appendix Set ting Language Setting English German French Italian Spanish Portuguese Dutch Swedish Chinese Korean Japanese On / Off On / Off Off Off On / Off On / Off On / Off Code 1 Yes / No Keystone Blue back Display Logo Mounting Rear Power management Power off confirmation Lamp mode Remote control Factory default Code 2 Quit Russian Yes / No ...
-
Sanyo PLV-Z1X - page 55
55 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.86 ...
-
Sanyo PLV-Z1X - page 56
56 Appendix 0.7” wide TFT Active Matrix type, 3 panels Multimedia Projector 9.0 lbs (4.1 kg) 14.13" x 4.59" x 10.77" (359mm x 116.7mm x 273.5mm) (not including raised portions) 960 x 540 dots 1,555,200 (960 x 540 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz Adjustable from 31” ...
-
Sanyo PLV-Z1X - page 57
57 Appendix Dimensions POWER WARNING LAMP REPLACE MENU INPUT SELECT ON-OFF 14.13 (359) 10.77 (273.5) Unit : inch (mm) 11.8˚ (Max.) 3.82 (97) 4.52 (114.7) 2.68 (68) Appendix ...
-
Sanyo PLV-Z1X - page 58
58 Appendix The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. ● Wall Anchor Kit Type No. : POA-CH-EX01 ● Component Cable (32.8’/10m) Type No. : POA-CA-COMP10 ● Component-VGA Cable Type No. : POA-CA-COMPVGA ● Scart-VGA Cable Type No. : POA-CA-SCART (This cable is used ...
-
Sanyo PLV-Z1X - page 59
59 ...
-
Sanyo PLV-Z1X - page 60
SANYO Electric Co., Ltd. Printed in Japan Part No. 610 318 0335 (1AA6P1P4677-- M4VA) ...
¿Tienes una pregunta acerca de Sanyo PLV-Z1X?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Sanyo PLV-Z1X, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Sanyo PLV-Z1X probablemente compartirá una forma de solucionarlo.