-
D-Link DI-704P - page 1
DI - 704P Ethernet Broadband Router User’s Manual (Please refer to the Quick Install Guide for installation instructions.) ...
-
D-Link DI-704P - page 2
- 2 - Table of Contents Introduction .................................................................................................. 4 Functions and Features ......................................................................... 4 Introduction to Broadband Router Technology .................................... 6 Introduction to Firewalls .... ...
-
D-Link DI-704P - page 3
- 3 - B.1 Install TCP/IP Protocol into Your PC .......................................... 29 B.2 Set TCP/IP Protocol for Working with the DI - 704P ................... 31 Technical Specifications ............................................................................. 38 Contacti ng Technical Support ........................................... ...
-
D-Link DI-704P - page 4
- 14 - Configuring the Ethernet Broadband Router The DI - 704P provides Web based configuration. You can configure your DI - 704P through your Netscape Communicator or Internet Explorer browser in MS Windows, Macintosh or UNIX based platforms. Start - up and Log in Activate your browser, and disable the proxy or add the IP address of the DI - 704P ...
-
D-Link DI-704P - page 5
- 15 - is ” a dmin ”) in the System Password field and click on the Log in button. If the password is correct, the web appearance will be cha nged into administrator configure mode. As listed in its main menu, there are several options for system administration. ...
-
D-Link DI-704P - page 6
- 16 - Device Information This option allows you to observe the DI - 704P’s working status: A. Modem Status B. Printer Status. The possible kinds of printer status include “ Ready ,” “ Not ready ,” “ Printing…, ” and “ Device error .” When a job is printing, there may appear a “ Kill Job ” button on the “Sidenote” column ...
-
D-Link DI-704P - page 7
- 17 - Useful Tools Thi s function enables you to change the administrator password, and get information about the Firmware version and the WAN's MAC Address . At this window you can: • V iew the system logs by clicking the View Log button. • Restart the DI - 704P by clicking the Reboot button. • B ackup your settings by clicking the Bac ...
-
D-Link DI-704P - page 8
- 18 - Setup Before you begin the Setup , you must choose the correct WAN type. 1. LAN IP Address : the DI - 704P’s IP address. The default address is 192.168.0.1. You can change the LAN IP Address if needed. 2. WAN Type : your ISP’s WAN Connection type. Click the Change button to choose from the following five options: A. Static IP Address : y ...
-
D-Link DI-704P - page 9
- 19 - Below are the five WAN types and the fields required to implement them: 1. Static IP Address E nter the proper setting provided by your ISP for the following fields : WAN IP Addr ess, Subnet Mask, Gateway, Primary and Secondary DNS 2. Dynamic IP Address • Host Name : optional. Required by some ISPs, for example, @Home. • Renew IP Forever ...
-
D-Link DI-704P - page 10
- 20 - 5. PPTP Just follow steps below to configure the PPTP WAN type: • Set My I P Address as the IP address that the ISP assigned to your PC, e.g. 10.0.0.140. • Set My Subnet Mask as the mask that the ISP assigned to your PC, e.g. 255.255.255.0. • Set Server IP Address as the IP address of the DSL modem, e.g. 10.0.0.138. • Input the PPTP ...
-
D-Link DI-704P - page 11
- 21 - DHCP Server The DI - 704P includes a DHCP Server. If you select “Enable” the DHCP Server, and you configure the computers on your network to “Obtain an IP Address automatically,” then when you turn your computer “ON,” it will automatically load the proper TCP/IP settings from the DI - 704P. You will not have to configure all the ...
-
D-Link DI-704P - page 12
- 22 - Virtual Server The firewall filters out unrecognized packets to protect your Intranet; so all computers networked with the DI - 704P are invisible to the outsi de world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping . A v irtual server is defined as a Serv ice Port , and all request s to this port w ...
-
D-Link DI-704P - page 13
- 29 - Appendix B TCP/IP Configuration for Windows 95/98 This section shows you how to install TCP/IP protocol into your personal computer after you have successfully installed one netwo rk card. (If you have not, please refer to your network card manual.) Section B.2 tells you how to set TCP/IP values for working with the DI - 704P. B.1 Install TC ...
-
D-Link DI-704P - page 14
- 30 - 5. Select Microsoft in the Manufacturers list. And choose TCP/IP in the Network Protocols list . Click OK to return to the Network window. 6. The TCP/IP protocol will be listed in the Network window. Click OK to complete the install procedure. Restart your PC to enable the TCP/IP protocol. ...
¿Tienes una pregunta acerca de D-Link DI-704P?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con D-Link DI-704P, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con D-Link DI-704P probablemente compartirá una forma de solucionarlo.