-
Davis Instruments 7855 - page 1
...
-
Davis Instruments 7855 - page 2
Product Number: 7855 Part Number: 7395.180 Rev. C May 15, 2008 WeatherLink ® for Weather Monit or II ® , Weather Wiza rd III ® , and Percept ion II ® , Mac OS X Version WeatherLink, Weather Monitor II , Weather Wizard III, an d Per ception II are tra demarks of Davis Instruments Corp. Hayes is a registered trademark of Hayes Microcomputer Produ ...
-
Davis Instruments 7855 - page 3
1 W elcome to W eatherLink! W elcome to Davis Instruments’ W eatherLi nk for W eather W izard III, Monitor II, and Perception II for Macintosh OS X (# 7855). The W eatherlink software and data logger allow you to connect your Apple Macinto sh computer running OS X to a Davis weather station so you can store, view , plot , analyze, export, print, ...
-
Davis Instruments 7855 - page 4
2 Hardware Installation • S tandard 4-Conductor Extension Cable — Use one 40’ (12 m) extension cable (#7876-040) to extend the dist ance between your station and the computer . (48’ (14.4 m) maximum) Hardware Inst allation Y ou can connect a computer directly to your weather station u sing the W eatherLink data logger (local connectio n), o ...
-
Davis Instruments 7855 - page 5
3 Connecting the W eather Station Connecting the Weather S t ation The instructions below explain how to connect your W eather Monitor II, W eather Wizard III, or Per ception II weathe r station di rectly to your computer . Note that if you extend the cable run beyond 48' (14.4 m), the software may have difficulty communicating with the statio ...
-
Davis Instruments 7855 - page 6
4 Connecting the W eather Station 4. A small switch near the data logg er cables controls the baud rate. The default setting is 2400 baud. If you need to run at 1200 baud, change th e setting before connecting the data log ger to the console. 5. Connect the short data logger cable to the cable jack marked “W eather- Link” on the bottom of your ...
-
Davis Instruments 7855 - page 7
5 Connecting the W eather Station 2. Place the external modem in a location where it can connect to both the data logger and the phone jack. Do not turn the modem on at this time. 3. Remove the mounting base from the weather station . 4. Remove all power from the weather statio n by removing the power adapter and battery backup. Note: Failure to re ...
-
Davis Instruments 7855 - page 8
6 About Phone Modem Co nnections 9. T urn the modem on. Note: It is very important to follow the order of these instructions. The modem must b e con- nected and turned on before you apply power to the weather station console. 10. Restore power to the weather statio n console by reattaching the power adapter . The weather station should beep three t ...
-
Davis Instruments 7855 - page 9
7 Software Installation and Setup Sof tware Inst allation and Setup This chapter covers software installation and setup. Inst alling the Sof tware 1. Place the Install Disk in your CD ROM drive. 2. Copy “install.sit” from the CD to y our desktop and open it. The installation software will automatically extract itself. 3. Run “install”. 4. F ...
-
Davis Instruments 7855 - page 10
8 Software Installation and Setup About the W alkthrough W eatherlink includes a W alkthrough option that steps you through the station configuration procedure. After addi ng a new station, the software automatically asks if y ou want to use W a lkthrough to set up your station. Y ou can, of course, choose “No” and set up the station by choosin ...
-
Davis Instruments 7855 - page 11
9 Communications Problems T roubleshooting Guide The following section answers some of the most comm only asked questions about W eatherLink. ® Please consult this guide and the on-line help files before contacting T echnical Support (see page 13). Communications Problems V Why can't the software communicate with the dat a logger and statio n ...
-
Davis Instruments 7855 - page 12
10 Communications Pro blems Checking the Communications Port The W eatherLink software includes a procedure for testing the communica- tions port to which your station is connected. Using the T est command will help you determine whether the communi cations port or the data logger is causing a communication problem. 1. Select Communications Config ...
-
Davis Instruments 7855 - page 13
11 Program Problems Program Problems V The barometer graph on the Bulletin does not “fill in” completely . When you first load the bulletin , the barometer graph will only fill in com- pletely when you have data in your database for the last six hours. Make sure of the following: • There is data in your database for the span of the barometer ...
-
Davis Instruments 7855 - page 14
12 Program Problems Next, try clearing th e archive memory using the clear dialog box. Y ou will lose any data not already downloaded in your archi ve memory , but all of your calibration numbers and alarm settings will remain intact. If this doesn’t work, reboot your weather station (t hat is, remove, then restore all power to the station). V Af ...
-
Davis Instruments 7855 - page 15
13 Contacting Davis T echnical Su pport Cont acting Davis T echnical Support If you have questions about the software, or enco unter problems installing or using the software, please contact Davi s T echnical Support. Most questions can be answered on the phone. Note: Sorry , we ar e unable to accept collect calls. Phone Support: (510) 732-7814 – ...
-
Davis Instruments 7855 - page 16
T oolbar Icons Hot Keys Open Station Exit Program Print Window This MonthÕs NOAA Summary Database Window View Help On-Line (Hang Up) Yearly Rainfall Plot Window Strip Chart Window Bulletin Window Download Main Program Windo w Ctrl-A . . . . . .Se t Alarms Ctrl-B . . . . . .View Bulletin Ctrl-C . . . . . .Station Configuratio n Ctrl-G . . . . . .De ...
¿Tienes una pregunta acerca de Davis Instruments 7855?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Davis Instruments 7855, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Davis Instruments 7855 probablemente compartirá una forma de solucionarlo.