-
Philips 14 PV 202 - page 1
1. CONNECT THE TV-VIDEO COMBI 4 ................... Placing the batteries in the remote control 4 ........... Connecting the cables 5 ............................. Connecting a decoder or other equipment 5 ............ 2. INSTALLATION 6 ................................... Initial installation 6 .................................. Allocating a decode ...
-
Philips 14 PV 202 - page 2
The remote control 0..9 Number buttons :0-9 STANDBY m Standby : Turn machine off, cancel current function. Press for more than 3 seconds: cancel current recording MUTE y Volume off : To switch the volume on or off RECORD n Record : To record the programme selected z Previous programme number : To select the respective previously selected programme ...
-
Philips 14 PV 202 - page 3
Front of the set 8 Power switch : To switch off the machine Caution: If you switch off using the power switch, TIMER-recordings are not possible! m Standby : Switch machine off, cancel current function. Press for more than 3 seconds: cancel current recording P /S Volume : In connection with the button q , r to regulate the volume r Programme number ...
-
Philips 14 PV 202 - page 4
Thank you for buying a PHILIPSTV-Video Combi. The 14PV202/07 is one of the most sophisticated and simple-to-use TV video recorders (TV-Video Combi) on the market. With this device you can record and play VHS-standard cassettes. Please take the time to read this operating manual before using your set. Safety instructions and other notes A Danger: Hi ...
-
Philips 14 PV 202 - page 5
Special functions on your TV-Video Combi If a TV channel which transmits Teletext/PDC is stored under programme number ’ P01 ’, time and date will automatically be taken from Teletext/PDC information. Philips has developed a system which produces the best possible playback quality. The interferences are reduced in old, frequently used video cas ...
-
Philips 14 PV 202 - page 6
Important for the United Kingdom This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: a Remove fuse cover and fuse. b Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI approved type. c Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it shou ...
-
Philips 14 PV 202 - page 7
Connecting the cables a Insert the aerial plug into the 2 socket. b Insert the plug of the mains cable into the wall socket. c If the little red standby light ( STANDBY 5 ) at the front panel of the set is not lit, please switch on the set using the main power switch. The power switch 8 is located on the left side panel of the set. This text will a ...
-
Philips 14 PV 202 - page 8
Initial installation a After you have connected the aerial, confirm the picture on the TV screen with OK on the remote control. ’Autoinstall’ starts. This picture will appear on the screen: AUTO INSTALL SEARCHING ƒƒƒƒƒƒƒ__________________ PLEASE WAIT... Wait until all TV channels have been found. This can take several minutes. b When Aut ...
-
Philips 14 PV 202 - page 9
Manual TV channel search In certain cases the ’Automatic TV channel search’ may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels. a Press the MENU button on the remote control. The main menu will appear. b Select the line ’ MANUAL SEARCH ’ with the = P r or ; P q b ...
-
Philips 14 PV 202 - page 10
Wait until all TV channels have been found. This can take several minutes. d When Autoinstall is complete, ’ STORED ’ will briefly appear on the TV screen. The time and date information have been set. e To end, press the MENU button. Information on how to search for a TV channel manually can be found in the section ’Manual TV channel search? ...
-
Philips 14 PV 202 - page 11
Setting the time and date D If a TV channel which transmits Teletext/PDC is stored under programme number ’P01’, time and date will automatically be taken from the Teletext/PDC information. D The next section ’Automatic setting of time/date (SMART CLOCK)’ will show you how to turn ’SMART CLOCK’ on and off. a Press the MENU button on the ...
-
Philips 14 PV 202 - page 12
Selecting a TV channel Select the required TV channel (= the programme number) with the ; P q , = P r buttons or with the digit buttons 0..9 on the remote control. Channel number of the scart socket a Select the channel number ’ E1 ’ using the button 0 on the remote control. Channel number of the sockets A/V on the front a Select channel number ...
-
Philips 14 PV 202 - page 13
How do I read TELETEXT? Many TV channels transmit TELETEXT information along with their TV channels. With this TV-Video Combi you can retrieve this information and display it on the screen using the built-in TELETEXT decoder. a Press the TELETEXT e button to switch the TELETEXT decoder on. Your TV-Video Combi will now show TELETEXT for the TV chann ...
-
Philips 14 PV 202 - page 14
D If you do not press a button, the alarm (TV-Video Combi) is switched off automatically after one hour. D If you press the button STANDBY m the current alarm is (TV-Video Combi) switched off. D If you want to continue to use the TV-Video Combi, press another button besides the button STANDBY m . Switch-off function (SLEEP TIMER) You can programme ...
-
Philips 14 PV 202 - page 15
General information E We suggest that, from now on, you switch off your TV-Video Combi with the m button on the front of the set or with the STANDBY m button on the remote control. When the set is in the standby mode, a small red lamp ( STANDBY 5 ) at the front of the set will be alight. E You can switch the machine on with the ; P q , = P r or 0.. ...
-
Philips 14 PV 202 - page 16
Summary of user guide The OSD menu offers the following functions. More details on each can be found in the appropriate chapter. MAIN MENU TV SETTINGS X SPECIAL SETTINGS CLOCK AUTO INSTALL MANUAL SEARCH TV CHANNEL ALLOC. WAKE UP EXIT: MENU CONTINUE: p Main menu User guide (OSD) The OSD (On-screen display) shows the various functions in the form of ...
-
Philips 14 PV 202 - page 17
Playing a pre-recorded cassette a Put a cassette into the cassette slot (see illustration). The cassette will be pulled in automatically. b Press the button PLAY G to play the cassette. The screen displays for example: 0:00:00 c To stop, press the STOP h button. d To eject the cassette, press ? on the front of the TV-Video Combi while it is in Stop ...
-
Philips 14 PV 202 - page 18
Still picture a Press the STILL R button. A still picture will appear on the screen. b Each time you press STILL R again, the picture will move on one step. D Interference stripes may appear on the screen during still picture. c To exit the still picture, press the PLAY G button. Searching for tape position without the picture (winding) a Stop the ...
-
Philips 14 PV 202 - page 19
Eliminating picture interference (tracking) If the picture quality is poor during playback, you can manually adjust the tracking. a Press and hold the button ; P q or = P r during playback until the playback quality reaches its best. ’ T+ ’ will appear on the screen when the button ; P q is pressed. ’ T- ’ will appear when you press the but ...
-
Philips 14 PV 202 - page 20
Use the ’Manual recording’ function to spontaneously start recording (e.g. to record a TV show already in progress). E Please refer to section ’Recording without automatic switch-off’ , if you want to manually start and stop your own recording. E Please refer to section ’Recording with automatic switch-off’ , if you would like to start ...
-
Philips 14 PV 202 - page 21
Protecting your recordings So that you don’t accidentally delete an important recording, remove the special tab on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want to protect your recording, you can seal the gap again with sticky tape or slide the special tab to the right. Auto- ...
-
Philips 14 PV 202 - page 22
Use programmed recording to automatically start and stop a recording at a later date. The TV-Video Combi requires the following information for each programmed recording: * the date you want to make the recording * the programme number for the TV channel you want to record * the start and stop time of the recording The TV-Video Combi stores all abo ...
-
Philips 14 PV 202 - page 23
D While a programmed recording is being made, you cannot operate your video recorder manually. If you would like to stop a programmed recording session, press the button STANDBY m for more than 3 seconds. D During recording, the red recording light at the front of the machine ( RECORD 5 ) will be alight. D If the end of the cassette is reached duri ...
-
Philips 14 PV 202 - page 24
Parental control (Child lock) This function protects your TV-Video Combi from unwanted use. All button functions on the front of the machine are blocked. D Programmed recordings will still be recorded (in spite of the parental control) and cannot be interrupted. a Please make sure the TELETEXT decoder is switched off using the button TELETEXT e . b ...
-
Philips 14 PV 202 - page 25
Continuous playback of a cassette You can play a cassette continuously. As soon as the end of the cassette or end of the recording is reached (30 seconds of blank tape), it is rewound to the beginning and the playback starts over again. D Please make sure the TELETEXT decoder is switched off using the button TELETEXT e . a Place a cassette in the m ...
-
Philips 14 PV 202 - page 26
If you encounter problems with your TV-Video Combi, these could be caused by one of the following. You can also call the customer service centre in your country. The telephone number is listed in the enclosed warranty information packet or on the last page of the manual cover. Have the model number (MODEL NO) and the production number (PROD.NO) of ...
-
Philips 14 PV 202 - page 27
Technical terms used Current tape position The part of the tape currently being played. External source A device connected via a socket (e.g.: scart socket) which transmits audio/video signals to the TV-Video Combi. Index code A code which is automatically recorded on the tape at the beginning of every recording. This code (recording ID) can be sea ...
-
Philips 14 PV 202 - page 28
26 3103 166 28901 0494/011 14PV202/07 (WwnnNNNwwnwNNnwnWwnNwNnWnNnwwN) ...
¿Tienes una pregunta acerca de Philips 14 PV 202?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Philips 14 PV 202, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Philips 14 PV 202 probablemente compartirá una forma de solucionarlo.