-
CDA FW222 - page 1
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu Passionate about style FW222 int egr at ed under count er lar der fridge Manual for Inst allation, Use and Maintenanc e FW222 Fridge Freezer Manual.indd 1 11/02/2011 16:38 ...
-
CDA FW222 - page 2
Important The CDA Gr oup Ltd cannot be held r esponsible for injuries or losses caused by incorr ect use or installation of this product. Please not e that CDA r eserve the right to inv alidate the guarantee supplied with this pr oduct following inc orrect installation or misuse of the appliance. This appliance is not designed to be used by people ...
-
CDA FW222 - page 3
Important Never stor e inflammable or explosive items and str ong corr osive acids or alkalis in the appliance. This is a household appliance, which is produced in ac cordanc e with the national standard. It is int ended for food st orage only , not for storage of blood, medicine and biological pr oducts. T o prevent risk of fir e, keep the appli ...
-
CDA FW222 - page 4
Use Fridge • Never put liquids in the r efrigerator uncov ered. • Never put hot foods in the r efrigerat or . W arm food should be allow ed to cool to r oom temperatur e befor e being put into the r efrigerator . • Nothing should rest against the r ear wall of the r efrigerator , as this will cause fr ost and possible condensation problems wh ...
-
CDA FW222 - page 5
Car e and cleaning Alwa ys disconnect the appliance from the po wer supply bef ore an y cleaning or maintenance. The fridge sections should be cleaned using a solution of bicarbonate of soda and lukewarm w ater . Do not use abrasive products or det ergents. A fter washing, rinse and dry thoroughly . Clean the shelves and balconies separ ately by ha ...
-
CDA FW222 - page 6
T r oubleshooting If you hav e any problems with y our appliance, you should chec k the troubleshooting prior t o calling CDA Customer Car e to pr event unnecessary service calls and potential c ost. If the appliance is not w orking • Check there is pow er to the appliance: • The house fuses are int act and the fuse in the plug has not blown. ? ...
-
CDA FW222 - page 7
KIT 9 10 fig. 2 fig. 3 1 2 3 4 5 6 7 8 9 10 Installation This appliance must nev er be installed close to heat sour ces i.e. heating elements, r adiators, c ooker s or in damp places. The appliance should be mounted on a piec e of w ood (for example a section o f workt op or kitc hen carcass) if a r aised floor is to be fitt ed, if the kitchen ...
-
CDA FW222 - page 8
fig. 6 fig. 4 fig. 5 11 11 600 min 550 820- 890 595 548 min 25 8 1 9- 889 1 00- 1 70 5 6 11 11 Installation Fig. 4 - Dimensions of the appliance Fig. 5 - Fitting the w orktop br ack et Remove the scr ew (5) on the top of the appliance, locat e the top brac ket(6) and fix the brac ket with screw(5). Fig.6 - Fitting the spacer piece T ake out the ...
-
CDA FW222 - page 9
9 fig. 9 Installation Fig. 7 - Adjusting the appliance height The height of the appliance can be adjusted by the help of adjustable feet t o fit the furniture height. Use a spirit level t o ensure the applianc e is level. Fig. 8 - Aligning the appliance Slide the appliance into the kitc hen unit and align the hinge surface with front surfac e of ...
-
CDA FW222 - page 10
fig. 1 2 Installation Fig. 1 0 - Fitting the decor door br ack et Unscrew and r emove the nuts and washer s from the applianc e door . Place fixing brac ket on the appliance door by inserting the holes to adjustment bolts. Dimension B= Measure fr om the underside surfac e of kitchen unit to the bottom of fixing br acket. Dimension C= Measure fr ...
-
CDA FW222 - page 11
fig. 1 5 Installation Fig. 1 3 - Aligning the decor door Close the door and chec k the alignment with the other unit doors. Adjust the decor door by scr ewing or unscr ewing the adjustment bolts for vertical adjustment and by the help of the slots on the fixing brac ket for other dir ections. Lock the scr ews into place as shown in 1 0.2. Fig. 1 ...
-
CDA FW222 - page 12
Installation Fig. 1 6 - Fitting the plinth Fit the plinth section, providing minimum 25 mm gap betw een the cabinet door and fix it. Never cover ov er the ventilation slots. Once installed the plinth must no t block the ventilation slo ts in the appliance. This ma y requir e cutting the plinth down. Failur e to ensur e adequate v entilation may in ...
-
CDA FW222 - page 13
Rev ersing the door It is possible to r ever se the door on this appliance, if r equired. T o do so, follo w the steps below: 1 . Open the door . 2. Loosen the hinge fixing screws (1) and r emove the door . 3. Remove the door fixing screw s (2). 4. Remove the cover caps (3). 5. Relocate the hinges as shown. 6. Refit the door to the hinges. Do no ...
-
CDA FW222 - page 14
Electrical information W arning! This appliance must be earthed. The mains lead of this appliance has been fitted with a BS 1 363A 1 3 amp fused plug. T o change a fuse in this type of plug, follow the steps below: 1 . Remove the fuse cover and fuse. 2. Fit replac ement 1 3A fuse, AST A approv ed to BS 1 362 type, into the fuse cover . 3. Replace ...
-
CDA FW222 - page 15
FW222 Fridge Freezer Manual.indd 15 11/02/2011 16:38 ...
-
CDA FW222 - page 16
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu Passionate about style T o c ontact our Customer Car e Department, or for Service, please contact us on the det ails below . FW222 Fridge Freezer Manual.indd 16 11/02/2011 16: ...
¿Tienes una pregunta acerca de CDA FW222?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con CDA FW222, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con CDA FW222 probablemente compartirá una forma de solucionarlo.