Español dropdown-ico

Manual de instrucciones Snapper SZT18426BVE, SZT20486BVE

36 de páginas 1.82 mb
Descargar

Pasar a la página of 36

Summary
  • Snapper SZT18426BVE, SZT20486BVE - page 1

    Safety Instructions & Operator’s Manual for SCRAMBLER ZERO-TURN HYDRO DRIVE SERIES 6 MODELS SZT18426BVE SZT20486BVE MODEL NUMBER EXPLANATION S Z T 18 42 6 B V E MODEL DESIGNATION ENGINE OPTIONS DRIVE SYSTEM TYPE ENGINE TYPE ENGINE HORSE POWER * ENGINE MODEL CUTTING WIDTH SERIES DESIGNATION S – SCRAMBLER ZT – Zero Turn 18 – 16 HP Engine ...

  • Snapper SZT18426BVE, SZT20486BVE - page 2

    2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply w ith the follow ing SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these in ...

  • Snapper SZT18426BVE, SZT20486BVE - page 3

    3 IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 7. Keep people and pets out of mow ing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, sw itches, blade controls and other safety dev ices frequently for proper operation and location. 9. Make sure all saf ...

  • Snapper SZT18426BVE, SZT20486BVE - page 4

    4 IMPORTANT SAFETY INSTRUCTIONS TOWING 1. Tow only w ith a machine that has a hitch designed for tow ing. DO NOT attach towed equipment except at the hitch point. 2. Follow the manufacturer’s recommendation for w eight limits for tow ed equipment and towing on slopes. 3. DO NOT allow children or others on towed equipment. 4. On slopes, the w eigh ...

  • Snapper SZT18426BVE, SZT20486BVE - page 5

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIO NS ........................................................................ 2-4 TABLE OF CO NTENTS ...................................................................................................... 5 SECTION 1 - FAMI LIARIZATI ON....................................................................... ...

  • Snapper SZT18426BVE, SZT20486BVE - page 6

    6 Section 1 - FAMILIARIZATION FIGURE 1.1 1. 1 INTRODUCTION This manual has been prepared for the operator’s of the SNAPPER SCRAMBLER. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT S ...

  • Snapper SZT18426BVE, SZT20486BVE - page 7

    7 Section 1 - FAMILIARIZATION 1.3 BASIC CONTROLS AND THEIR FUNCTIONS The figures below identify each of the operator controls and their basic function. Controls will be described in greater detail further on in this manual. 1.3.1. IGNITION SWITCH (Left Control Panel) Starts and stops engine. Refer to Section “ENGINE OPERATION” for further detai ...

  • Snapper SZT18426BVE, SZT20486BVE - page 8

    8 Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt to operate the machine until you have read this manual thoroughly and become familiar w ith all controls and operating procedures. Serious injury or damage can result. 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check tir ...

  • Snapper SZT18426BVE, SZT20486BVE - page 9

    9 Section 2 - OPERATING INSTRUCTIONS 2.3 MOTION CONTROL IMPORTANT: This machine is equipped with hydrostatic drive. The direction and speed of movement are controlled by dual motion control levers. A small amount of movement of either lever ma y ca us e t he ma ch i ne to move instantly, and can result in severe injury or damage. Op er at e le ve r ...

  • Snapper SZT18426BVE, SZT20486BVE - page 10

    10 Section 2 - OPERATING INSTRUCTIONS 2.3.4. CONVENTIONAL TURNING 1. To turn left , slowly ease back on the left lever while keeping or increasing pressure on the right lever. See Figure 2.6. The more you ease off on the left lever and/or push on the right lever, the tighter the turn. 2. To turn right , slowly ease back on the right lever while kee ...

  • Snapper SZT18426BVE, SZT20486BVE - page 11

    11 Section 2 - OPERATING INSTRUCTIONS 2.4 MOWER OPERATION 2.4.1. CUTTING HEIGHT ADJUSTMENT This machine has seven different cutting height positions. IMPORTANT: When positioning the cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to pull up on the release lever at the same time. Use the release ...

  • Snapper SZT18426BVE, SZT20486BVE - page 12

    12 Section 2 - OPERATING INSTRUCTIONS 2.5 SAFETY INTERLOCK SYSTEM CHECKS This machine is equipped with an electrical safety interlock system that is pr ovided for the safety of the operator and others. All safety devices must be in place and functioning properly befor e operating the machine. Perform the following interlock sy st em checks periodic ...

  • Snapper SZT18426BVE, SZT20486BVE - page 13

    13 Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the SCRAMBLER, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number. 3.2 SERVICE - AFTER FIRST 5 HOURS WARNING DO NOT atte ...

  • Snapper SZT18426BVE, SZT20486BVE - page 14

    14 Section 3 - MAINTENANCE 3.2.4. CHECK MOWER DRIVE BELT 1. Footrest/Floor pan Removal a. Pull deck lift handle to highest cutting position. See Figure 3.3. b. Remove the two knobs that secure the rear of the floor pan. c. Remove two bolts at front bottom edge of foot rest. Lift up on footrest and slide rear of floor pan out from under deck lift me ...

  • Snapper SZT18426BVE, SZT20486BVE - page 15

    15 Section 3 - MAINTENANCE 3.3 SERVICE EVERY 25 OPERATING HOURS 3.3.1. ENGINE 5. Air Filter c. Reinstall air cleaner cover. Insert tabs located on the engine cover into corresponding slots in air cleaner cover. IMPORTANT: The yellow tabs must be completely inserted into air cleaner cover or the compartment will not be completely sealed to prevent d ...

  • Snapper SZT18426BVE, SZT20486BVE - page 16

    16 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key . Remove spark plug w ire from spark plug and secure w ire away from spark plug. Engine and components can be extremely hot. Av oid burns by allowing engine and components suffici ...

  • Snapper SZT18426BVE, SZT20486BVE - page 17

    17 Section 3 – MAINTENANCE 3.4 SERVICE - ANNUALLY Perform all maintenance as described in the maintenance schedule. 3.4.1. Engine Service engine according to engine owner’s manual. 3.4.2. Air Filter Refer to engine owner’s manual for service instructions. 3.4.3. Oil Filter Refer to engine owner’s manual for service instructions. 3.4.4. Engi ...

  • Snapper SZT18426BVE, SZT20486BVE - page 18

    18 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key . Remove spark plug w ire from spark plug and secure w ire away from spark plug. Engine and components can be extremely hot. Av oid burns by allowing engine and compo ...

  • Snapper SZT18426BVE, SZT20486BVE - page 19

    19 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key . Remove spark plug w ire from spark plug and secure w ire away from spark plug. Engine and components can be extremely hot. Av oid burns by allowing engine and compo ...

  • Snapper SZT18426BVE, SZT20486BVE - page 20

    20 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key . Remove spark plug w ire from spark plug and secure w ire away from spark plug. Engine and components can be extremely hot. Av oid burns by allowing engine and compo ...

  • Snapper SZT18426BVE, SZT20486BVE - page 21

    21 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key . Remove spark plug w ire from spark plug and secure w ire away from spark plug. Engine and components can be extremely hot. Av oid burns by allowing engine and compo ...

  • Snapper SZT18426BVE, SZT20486BVE - page 22

    22 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key . Remove spark plug w ire from spark plug and secure w ire away from spark plug. Engine and components can be extremely hot. Av oid burns by allowing engine and compo ...

  • Snapper SZT18426BVE, SZT20486BVE - page 23

    23 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key . Remove spark plug w ire from spark plug and secure w ire away from spark plug. Engine and components can be extremely hot. Av oid burns by allowing engine and compo ...

  • Snapper SZT18426BVE, SZT20486BVE - page 24

    24 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key . Remove spark plug w ire from spark plug and secure w ire away from spark plug. Engine and components can be extremely hot. Av oid burns by allowing engine and compo ...

  • Snapper SZT18426BVE, SZT20486BVE - page 25

    25 Section 4 - ADJUSTMENTS & REPAIR WARNING The electrolyte (acid) produces a highly explosive gas. Keep all sparks, flame and fire away from area when charging battery or when handling electrolyte or battery. Electroly te (acid) is a highly corrosive liquid. Wear eye protection. Wash affected areas immediately after having ey e or skin contact ...

  • Snapper SZT18426BVE, SZT20486BVE - page 26

    26 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w o ...

  • Snapper SZT18426BVE, SZT20486BVE - page 27

    27 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Starter Will Not Crank 1. Battery dead. 1. Service battery. Engine 2. Blown fuse. 2. Replace fuse. 3. Electrical connections loose or corroded. 3. Cl ean and check connections for good contact. 4. Defective ignition sw itch. 4. Contact authorized SNA PPER dealer. 5. Blade engagement switch ...

  • Snapper SZT18426BVE, SZT20486BVE - page 28

    28 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Rider Will Not Move O r 1. Motion control levers in neutral position. 1. Move levers in desired direction. Loss Of Traction 2. R oll r ele ase lever is in “ ROL L” po sit io n. 2. Move roll release lever to the engaged position. 3. Low transmission hy draulic oil level. 3. Contact auth ...

  • Snapper SZT18426BVE, SZT20486BVE - page 29

    29 SERVICE SCHEDULE ITEM SERVICE PERFORMED REF. EACH USE 5 HRS 25 HRS 50 HRS 100 HRS EACH SEASON Engine Oil Check Oil Level Page 8 X Initial Oil Change Page 13 X Periodic Oil Change Page 14 X* Oil Filter Initial Oil Change Engine Manual & Page 13 X Periodic Oil Change Engine Manual & Page 14 X* Air Pre-Cleaner Clean Sponge Element Engine Ma ...

  • Snapper SZT18426BVE, SZT20486BVE - page 30

    30 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the orig inal purchaser's residential, non-commercial use, SNAPPER , through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in materi ...

  • Snapper SZT18426BVE, SZT20486BVE - page 31

    31 PRIMARY MAINTENANCE ...

  • Snapper SZT18426BVE, SZT20486BVE - page 32

    32 PRIMAR Y MAINTENANCE ...

  • Snapper SZT18426BVE, SZT20486BVE - page 33

    33 PRIMAR Y MAINTENANCE ...

  • Snapper SZT18426BVE, SZT20486BVE - page 34

    34 PRIMARY MAINTENANCE ...

  • Snapper SZT18426BVE, SZT20486BVE - page 35

    35 SNAPPER PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following informa tion on your Snapper purchase) Model Number _____________________________________________________________ Serial Number _____________________________________________________________ Date of Pu rchase ______________________ ...

  • Snapper SZT18426BVE, SZT20486BVE - page 36

    36 Safety Instructions & Operator’s Manual for SCRAMBLER ZERO-TURN HYDRO DRIVE SERIES 6 IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contai n very important emissions information and critical safety warnings. Read, Understand, ...

Fabricante Snapper Categoría Lawn Mower

Los documentos del dispositivo Snapper SZT18426BVE, SZT20486BVE que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Snapper
- manuales de instrucciones SZT18426BVE, SZT20486BVE
- hojas de producto Snapper
- folletos informativos
- o etiquetas energéticas Snapper SZT18426BVE, SZT20486BVE
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Snapper SZT18426BVE, SZT20486BVE.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Snapper SZT18426BVE, SZT20486BVE, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Snapper SZT18426BVE, SZT20486BVE. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Snapper SZT18426BVE, SZT20486BVE.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Snapper SZT18426BVE, SZT20486BVE, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Snapper SZT18426BVE, SZT20486BVE. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Snapper SZT18426BVE, SZT20486BVE.

El manual de instrucciones completo de Snapper debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Snapper SZT18426BVE, SZT20486BVE - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Snapper SZT18426BVE, SZT20486BVE, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Snapper SZT18426BVE, SZT20486BVE que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Snapper SZT18426BVE, SZT20486BVE - que deben facilitarnos los primeros pasos durante el uso de Snapper SZT18426BVE, SZT20486BVE
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Snapper SZT18426BVE, SZT20486BVE
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Snapper SZT18426BVE, SZT20486BVE en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Snapper SZT18426BVE, SZT20486BVE?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Snapper SZT18426BVE, SZT20486BVE, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Snapper SZT18426BVE, SZT20486BVE probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)