-
Kicker SX650.1 - page 1
...
-
Kicker SX650.1 - page 2
3 SX .1 Series Amplifiers F ea tures F ea tures Low Impedance Operation Stable into 2 ohm (SX650.1) or 1 ohm (SX1250.1) mono loads. SORT Protection Circuitry ( S hort circuit, O ver -voltage, R everse polarity , T hermal) Protects amplifier from accidents and out of spec operation. MOSFET Power Supply Pr ovides high ef ficiency operation. PAST ( P ...
-
Kicker SX650.1 - page 3
5 SX .1 Series Amplifiers F ea tures VFD DISPLAY - cont GAIN - Indicates you are in the gain menu. EQ - Indicates you are in the equalizer menu. LPF - Indicates you are in the low pass filter menu. HPF - Indicates you are in the high pass filter menu. PHASE - Indicates you are in the phase menu. KOMP - Indicates you are in the Kompressor menu. MEM- ...
-
Kicker SX650.1 - page 4
7 SX .1 Series Amplifiers Installa tion Moun ting When selecting a location to mount your Kicker amplifier be sure it is structurally sound and that ther e are no items behind the area that could be damaged by the screws. Check for wiring, brake lines, fuel lines, gas tanks, etc. All amplifiers generate heat under normal operation. Be sure to choos ...
-
Kicker SX650.1 - page 5
9 SX .1 Series Amplifiers Installa tion S yst em Diagrams SINGLE SPEAKER OR VOICE COIL SX.1 series amplifiers are capable of operating into a minimum impedance of 2 ohms (SX650.1) or 1 ohm (SX1250.1). + _ GROUND REMOTE TURN-ON BA TTER Y +12V FUSE 18" or less S+ S - ESC HOME ENT M1 AMP 1 LOCK LEFT SYS RIGHT MUTE AMP 2 GAINEQ LPF HPF PHASE KOMP ...
-
Kicker SX650.1 - page 6
11 SX .1 Series Amplifiers Installa tion AMPLIFIER STRAPPING SX.1 series amplifiers are capable of being strapped together to provide twice the power into twice their rated minimum impedance. Only like model amps can be strapped together . In other words, the SX650.1 can only be strapped to another SX650.1 and the SX1250.1 can only be strapped to a ...
-
Kicker SX650.1 - page 7
13 SX .1 Series Amplifiers Installa tion USING THE SIGNAL OUTPUT JACKS (PAST) The Output ( P re A mp S ignal T ransfer) RCA jacks allow you to send the incoming signal from one Kicker SX series amplifier to another amplifier or processor without the need for Y cables. The signal from the PAST jacks is identical to the signal fed to the amplifier vi ...
-
Kicker SX650.1 - page 8
15 SX .1 Series Amplifiers Opera tion Na viga tion Y our KICKER SX series amplifier uses the latest in Digital DSP control and provides you with valuable operational infor ma- tion about your amplifier , real-time diagnostics and a full multi-level menu-driven operating system to access and adjust your amplifier . The menu system is designed in lay ...
-
Kicker SX650.1 - page 9
17 SX .1 Series Amplifiers Opera tion Menu S yst em The menu system layout is as follows: DEFAULT - This menu is displayed when your amp is operating and no adjustments are being made to your ampli- fier . This information scrolls through the display one after the other and then repeats. 1.) KICKER - Hey , we needed a brand plug for us since this a ...
-
Kicker SX650.1 - page 10
19 SX .1 Series Amplifiers Opera tion SICK BAY - cont 7c.) PINK NOISE is a built in pink noise generator to test operation of the amplifier Use the UP and DOWN keys to select NOISE ON or NOISE OFf . When the PINK NOISE is ON the LEFT and RIGHT indicators in the ISIS VFD will blink on and of f. When you are done using the PINK NOISE generator press ...
-
Kicker SX650.1 - page 11
21 SX .1 Series Amplifiers Opera tion 14.) Display - Several options to allow customizing the amplifier’ s VFD display . 14a.) BRIGHTNESS - Adjust the intensity level of the ISIS VFD display . Five selectable levels. MINIMUM - dimmest setting. LOW MEDIUM HIGH MAXIMUM - brightest setting. 14b.) TEMP C/F - Selects between Celsius ( CELSIUS ) or Fah ...
-
Kicker SX650.1 - page 12
23 SX .1 Series Amplifiers Opera tion EQ MENU - Here you can adjust the single band parametric equalizer . Y our options are frequency , bandwidth and boost/cut . Press the ENT key to enter the EQ adjustment menu. Use the UP and DOWN keys to scroll through frequency , bandwidth and boost/cut and press the ENT key to select. FREQUENCY selects the ce ...
-
Kicker SX650.1 - page 13
25 SX .1 Series Amplifiers Opera tion hi-pass MENU - Here is where you adjust the high pass crossover . Y our options are frequency and SLOPE . Press the ENT key to enter the LO-P ASS adjustment menu. Use the UP and DOWN keys to scroll through frequency and SLOPE and press the ENT key to select. FREQUENCY selects the crossover point and can be set ...
-
Kicker SX650.1 - page 14
27 SX .1 Series Amplifiers Opera tion Kompressor MENU - Here you can select which Kompr essor setting you wish to use. The SX amplifier utilizes a full digital compressor circuit to tweak the amplifier and the sound to your unique needs. Y our options are RED-LINE , CONTOUR , ATTACK , and OFF . Press the ENT key to enter the KOMPRESSOR adjustment m ...
-
Kicker SX650.1 - page 15
29 SX .1 Series Amplifiers Opera tion UNLOCK AMPLIFIER - cont. If you enter the wrong code the display will flash the mes- sage BAD CODE and then return you to UNLOCK screen. Press the ENT key to enter your lock your code again. Enter your code again making sure to place the corr ect character in the correct position in the display . Blank spaces c ...
-
Kicker SX650.1 - page 16
31 SX .1 Series Amplifiers Opera tion PRESET PRESETS Ok, we know that sounds like a certain pizza commercial, but seriously the four memory presets come with settings already in them. Y ou can use these as a starting point to do your own tweak- ing or for quick push-a-button-and-be-done setup. Any preset you store will r eplace the ones that come f ...
-
Kicker SX650.1 - page 17
33 SX .1 Series Amplifiers Help Alternator n n oise (whining sound that varies with engine RPM) : ¬ Check for damaged RCA cables. ¬ Check routing of RCA cable. ¬ Check source unit for good ground. ¬ Check GAIN RANGE in SYSTEM menu, tur n down if set too high. ¬ Check GAIN in MAIN MENU, tur n down if set too high. CAUTION: When jump-startin ...
-
Kicker SX650.1 - page 18
35 SX .1 Series Amplifiers Specifica tions P erf ormanc e Model SX650.1 SX1250.1 RMS Power In Watts, All Channels Driven @ 13.8V, 4 Ω Mono, 1.5% THD 325 x 1 na @ 13.8V, 2 Ω Mono, 1.5% THD 650 x 1 625 x 1 @ 13.8V, 1 Ω Mono, 1.5% THD na 1250 x 1 Dynamic Power In Watts, All Channels Driven @ 14.4V, 4 Ω Mono, 1.5% THD 325 x 1 na @ 14.4V, 2 Ω ...
-
Kicker SX650.1 - page 19
37 SX .1 Series Amplifiers Warran ty EL E CTRONICS LIMIT ED WARRAN TY WHA T IS NO T C O V ERED? Kicker warrants this product to be free fr om defects in material and workman- ship under normal use for a period of 90 DAYS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer it is war ranted for TWO (2) YEARS f ...
-
Kicker SX650.1 - page 20
39 SX .1 Series Amplifiers No t es Chic’s Numbers Hook Ups 38 SX .1 Series Amplifiers No t es No t es Pizza Deliv ery ...
¿Tienes una pregunta acerca de Kicker SX650.1?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Kicker SX650.1, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Kicker SX650.1 probablemente compartirá una forma de solucionarlo.