-
Hotpoint WMUD - page 1
GB 1 English,1 Contents Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle T echnical data Care and maintenance, 6 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the ...
-
Hotpoint WMUD - page 2
2 GB Installation ning the adjustable front feet (see figure); the angle of inclination, measured accor ding to the worktop, must not exceed 2°. Levelling your appliance correctly will pr ovide it with stability and avoid any vibrations, noise and shifting during operation. If it is placed on a fitted or loose carpet, adjust the feet in such a way ...
-
Hotpoint WMUD - page 3
GB 3 Connecting the drain hose Connect the drain hose, without ben- ding it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot. If it is plac ...
-
Hotpoint WMUD - page 4
4 GB As the colours of the wires in the lead may not correspond with the colour ed markings iden- tifying the terminals in your plug, proceed as follows: Connect Green & Y ellow wire to terminal marked E or or coloured Gr een or Green & Y ellow . Connect Brown wir e to terminal marked L or coloured Red. Connect Blue wire to terminal marked ...
-
Hotpoint WMUD - page 5
GB 5 T e c h n i c a l d a t a Model WMUD 9627 Dimensions width 59.5 cm height 85 cm depth 60.5 cm Capacity from 1 to 9 kg Electrical connections please refer to the technical data plate fixed to the ma- chine W ater con- nections maximum pressur e 1 MPa (10 bar) minimum pressur e 0.05 MPa (0.5 bar) drum capacity 62 litres Spin speed up to 1600 rot ...
-
Hotpoint WMUD - page 6
6 GB Car e and maintenance Cutting of f the water and electri- city supplies • Turn off the wat er t ap a fter eve ry w ash cycl e. Thi s wi ll l imit wea r on the hyd raul ic s yste m in - sid e th e wa shin g ma chin e an d he lp t o pr even t lea ks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the ...
-
Hotpoint WMUD - page 7
GB 7 Pr ecautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The fol- lowing information is provided for safety r easons and must therefor e be read carefully . General safety • This appliance was designed for domestic use only . • This appliance is not intended for use by p ...
-
Hotpoint WMUD - page 8
8 GB Det erg ent d ispen ser dr awer: use d to dispe nse de ter - gen ts an d was hing addit ives (see “Dete rgent s and laund ry”) . ON/OFF button : press this briefly to switch the ma- chine on or off. The ST AR T/P AUSE indicator light, which flashes slowly in a green colour shows that the machine is switched on. T o switch off the washing m ...
-
Hotpoint WMUD - page 9
GB 9 Display The display is useful when programming the machine and pr ovides a great deal of information. The two upper strings A and B provide details of the wash cycle selected, the wash cycle phase in pr ogress and all informa- tion relating to the pr ogress status of the wash cycle. String C shows the time remaining until the end of the wash c ...
-
Hotpoint WMUD - page 10
10 GB Running a wash cycle 1. SWITCH THE MACHINE ON. Press the On/Of f button ; the text POWER ON will appear on the display and the ST ART/P AUSE indicator light will flash slowly in a green colour . 2. LOAD THE LAUNDR Y . Open the porthole door . Load the laundry , making sure you do not exceed the maximum load value indicated in the table of pro ...
-
Hotpoint WMUD - page 11
GB 11 W ash cycles and functions Wash functions Time Saver If you select this option, the wash cycle duration will be redu- ced by up to 50%, depending on the selected cycle, thereby guar anteei ng simul taneou s water and energy savin g. Use this cycle for lightly soiled garments. ! It cannot be used with the , “F ast W ash 6 0’”, , , . Stea ...
-
Hotpoint WMUD - page 12
12 GB Detergent dispenser drawer Good washing results also depend on the corr ect dose of detergent: adding too much detergent will not necessarily result in a mor e efficient wash, and may in fact cause a build up on the inside of your appliance and contribute to environmental pollution. ! Use powder detergent for white cotton garments, for pre-wa ...
-
Hotpoint WMUD - page 13
GB 13 T r oubleshooting Y our washing machine could fail to work. Before contacting the T echnical Assistance Centre (see “Assistance”) , make sur e that the problem cannot be solved easily using the following list. Problem: The machine does not switch on. The wash cycle does not start. The machine does not fill with wa- ter or “NO W A TER CH ...
-
Hotpoint WMUD - page 14
14 GB The machine is noisy . The machine wont spin properly . The machine leaks from the di- spenser . The machine leaks (other than dispenser). The indicator lights on the console are flashing rapidly . The machine smells. The machine door cannot be opened. Door Seal damaged at the bottom. The water level is too low when the machine is washing. Th ...
-
Hotpoint WMUD - page 15
GB 15 Assistance Guarantee 12 Months Parts and Labour Guarantee Y our appliance has the benefit of our manufacturer’ s guarantee, which covers the cost of br eakdown repairs for twelve months from the date of pur chase. This gives you the reassurance that if, within that time, your appliance is pr oven to be defective because of either workmanshi ...
-
Hotpoint WMUD - page 16
16 GB 195105699.00 06/2012 - Xerox Fabriano After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer . Essential Contact Information Hotpoint Service We ar e the largest service team in Europe of fering you access to 400 skilled telephone advisors and 1000 fully ...
¿Tienes una pregunta acerca de Hotpoint WMUD?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Hotpoint WMUD, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Hotpoint WMUD probablemente compartirá una forma de solucionarlo.