-
Electrolux CHDL 4150 - page 1
DL 4150 CHDL 4150 DL 6250 570 D 5708 D Cooker Hood Cappa aspirante Campana extractora Operating and Installation Instructions Istruzioni di montaggio ed uso Instrucciones de montaje y manejo ...
-
Electrolux CHDL 4150 - page 2
2 Printed on recycled paper AEG - putting words into action Contents Safety warnings 3 For the user 3 For the installer 3 Description of the Appliance 5 Extractor version 5 Filter V ersion 5 Control Panel 6 Maintenance and care 7 Cleaning the hood 7 Metal grease filter 7 Removing the metal grease filter 7 Charcoal filter 9 Changing the light bulb 1 ...
-
Electrolux CHDL 4150 - page 3
3 Safety warnings For the user • The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal fired cookers it is essential to avoid open flames. • Also, when frying, keep the deep fryi ...
-
Electrolux CHDL 4150 - page 4
4 approximately the same as the outlet hole. • National and regional building regulations impose a number of restrictions on using hoods and fuel-burning appliances connected to a chimney , such as coal or oil room-heaters and gas fires, in the same room. • Hoods can only be used safely with appliances connected to a chimney if the room and/or ...
-
Electrolux CHDL 4150 - page 5
5 Fig. 2 Description of the Appliance • The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter . • Y ou will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre). Extractor version • In this version fumes are extracted to th ...
-
Electrolux CHDL 4150 - page 6
6 Fig. 3 Light switch 0 = Light OFF 1 = Light ON Motor switch 0 = Motor OFF 1 = Speed 1 - Slow 2 = Speed 2 - Medium 3 = Speed 3 - Fast Light switch = Light OFF = Light ON Motor switch = Sliding speed control DL 4150 CHDL 4150 Control Panel • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more ...
-
Electrolux CHDL 4150 - page 7
7 Maintenance and care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Cleaning the hood • Clean the outside of the hood using a damp cloth and a mild deter- gent. • Never use corrosive, abrasive or flammable cleaning products. • Never insert pointed objects in the motor ’ s protec ...
-
Electrolux CHDL 4150 - page 8
8 Hand washing Soak grease filters for about one hour in hot water with a little washing up liquid added, then rinse off thoroughly with hot water . Repeat the process if necessary . Refit the grease filters when they are dry . Dishwasher Place grease filters in the dishwasher . Select most powerful washing programme and highest temperature, at lea ...
-
Electrolux CHDL 4150 - page 9
9 Fig. 5 Charcoal filter • The charcoal filter should only be used if you want to use the hood in the recirculation function. • T o do this you will need an original AEG charcoal filter (available from your local Service Force Centre). • The charcoal filter cannot be washed nor regenerated. The charcoal filter should be replaced every 12 mont ...
-
Electrolux CHDL 4150 - page 10
10 Fig. 6 W arning • Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. Y ou are therefore strongly recommended to follow these instructions. • The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to obs ...
-
Electrolux CHDL 4150 - page 11
11 What to do if If your appliance fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start... Check that: The hood is connected to the electricity supply . Check that a fan speed has been selected The cooker hood is not working Check that: ef fectively .. The fan speed is set high enough for the ...
-
Electrolux CHDL 4150 - page 12
12 Special accessories* Charcoal filter KF8 E-Nr . 942 1 18 648 * Not available in UK, please contact your local Service Force Centre. T echnical assistance service (not for UK) Y ou are welcome to telephone our technical assistance service (see list of technical assistance centres) whenever you need information or in the unlikely event of a fault. ...
-
Electrolux CHDL 4150 - page 13
13 T echnical Specifications Model: Maximum absorbed power: Motor absorption: Lighting (E14): Lighting (PL): Length of the cable : Electrical connection : DL4150 220 W 1 x 140 W 2 x 40 W 150 cm 230 V DL 6250 295 W 2 x 140 W 1 x 1 1 W 150 cm 230 V CHDL4150 220 W 1 x 140 W 2 x 40 W 150 cm 220-240 V 570 D 200 W 1 x 186 W 1 x 1 1 W 150 cm 230 V 5708 34 ...
-
Electrolux CHDL 4150 - page 14
14 Electrical connection (not for UK) Safety warnings for the electrician Before connecting the appliance to the power supply , check that the voltage indicated on the rating plate corresponds to the mains power supply available. Appliances fitted with a plug can be connected to any standard power socket within easy access. Should it be necessary t ...
-
Electrolux CHDL 4150 - page 15
15 Installation - Fig. 8 • Drill the base of the wall unit to allow for passage of the hood body . Fig. 7. • Drill the top of the wall unit to allow for passage of the exhaust pipe and the electrical cable. Fig. 7. • Remove the grease filter (1). • Remove the grease filter support frame, by pressing the two spring clamps located at the side ...
-
Electrolux CHDL 4150 - page 16
16 OK! OK! 1 2 2 3-F 4 5-C 7 6 6 7 7 7 5-C Fig. 8 ...
-
Electrolux CHDL 4150 - page 17
17 Removing the hood from cabinet Follow these steps: • Remove the grease filter . • Remove the 4 additional screws from the frame. • Loosen the screws on the two fixing springs. Fig. 9 . • Push a flat screwdriver into the hole for the fixing springs (right and left) and push each of the fixing springs inwards. Fig. 10 . • At the same tim ...
-
Electrolux CHDL 4150 - page 18
18 Relocating the control unit (Only 570 D - 5708 D) The control unit can be fitted at a different point (cladding, lighting facia, etc.). Remove the grease filter grill and the housing frame. 1. Loosen two screws and pull the control unit forwards out of the housing. Undo the socket connection. Caution: The socket connection cable is only long eno ...
-
Electrolux CHDL 4150 - page 19
...
-
Electrolux CHDL 4150 - page 20
LI13EC Ed. 02/03 AEG Hausger ä te GmbH Postfach 1036 D-90327 N ü rnberg http:// www .aeg.hausgeraete.de http ://www .aeg.co.uk © Copyright by AEG From the Electrolux Group. The world ´ s No.1 choice. The Electrolux Group is the world ´ s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrol ...
¿Tienes una pregunta acerca de Electrolux CHDL 4150?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Electrolux CHDL 4150, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Electrolux CHDL 4150 probablemente compartirá una forma de solucionarlo.