-
Airlink101 AWLH6045 - page 1
300N Draft 802.11n Wireless PCI Adapter Model # AWLH6045 User’s Manual Rev. 1.1 ...
-
Airlink101 AWLH6045 - page 2
2 Table of Contents 1. Intr oducti on ................................................................................................................ .3 1.1 Package Contents ................................................................................................. 3 1.2 Feat ures ............................................................. ...
-
Airlink101 AWLH6045 - page 3
3 1. Introduction Congratulations on your purchase of the 300N Draft 802.11n Wireless PCI Adapter. The 300N PCI Adapter provides wireless data rate of up to 300 Mbps* when used with other AirLink101™ 300N wireless products. T he high bandwidth combined with extended wireless coverage delivers fast and reliabl e connection for all of your networki ...
-
Airlink101 AWLH6045 - page 4
4 2. Inst allation 2.1 Install Driver & Utility This section provides instructions on how to install the 300N Draft 802.11n Wireless PCI Adapter . The driver is instal led along with the utility. Note: Be sure to turn o ff your computer before inserting the Adapter. For Windows 98SE and ME users, you may be prompted to insert the Windows 98SE o ...
-
Airlink101 AWLH6045 - page 5
5 Step 3 The Autorun screen will pop up. Select Install Driver and Utility from the menu. Note: If the Autorun screen doesn’t appear automatically go to Start , Run , and type D:UtilitySetup.exe (where D is the letter of your CD drive) and click OK . Step 4 Click Next at the welcome screen. ...
-
Airlink101 AWLH6045 - page 6
6 Step 5 Click Next to accept the default destination folder. Step 6 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signatur e Not Found prompt). ...
-
Airlink101 AWLH6045 - page 7
7 Step 7 Verify Yes, I want to restart my computer now is selected and click Finish to restart your computer. Step 8 After the computer is re started, Windows will ask to connect to Windows Update, select No, not this time and click Next . ...
-
Airlink101 AWLH6045 - page 8
8 Step 9 Select Install the software automatically and click Next . Step 10 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signatur e Not Found prompt). For Windows 98SE and ME, select Search for the best dr iver for your device and click Next . Verify all the check boxes are checked and click Next . ...
-
Airlink101 AWLH6045 - page 9
9 Step 11 Click Finish . (Restart the computer for Windows 98SE and ME). ...
-
Airlink101 AWLH6045 - page 10
10 2.2 Verify Driver Installation To verify if the driver has been installed successfully, pl ease perform the following steps. Step 1 Right-click on My C omputer from your desktop and select Properties . Step 2 Select the Device Manager tab. (For Windows 2000/XP, select the Hardware tab first then click on Device Manager ). ...
-
Airlink101 AWLH6045 - page 11
11 Step 3 Expand Network adapters from the list and verify that AirLink101 300N Wireless PCI Adapter is listed and no yellow question mark is beside it. If AirLink101 300N Wireless PCI Adapter is not listed, or y ou see a yellow question mark beside it, please re-install the driver again. ...
-
Airlink101 AWLH6045 - page 12
12 3. Configure the PCI Adapter This section describes how to connect your 300N Wireless PCI Adapter to a wireless network. Note to Windows XP Users: You must disable the Wireless Zero Configur ation Utility in order to use the bundled Wireless Utility. Please follow the steps below to disable XP’s wireless utility. Step 1 Double-click on the Wir ...
-
Airlink101 AWLH6045 - page 13
13 To open the PCI Adapter’s utility go to Start > (All) Programs > AirLink101 300N Wireless PCI Adapter > AirLin k101 300N Wireless PCI Adapter Step 1 Go to the AP List tab, select the SSID (Network Name) of the wireless network you wish to connect to, and click Connect . ...
-
Airlink101 AWLH6045 - page 14
14 Step 2 If encryption is not enabled for the select ed access point / router, skip to step 6. Otherwise, enter a Profile Name for your wireless setting and click Next . Step 3 Verify that the Network Name matches the SSID of your wireless network and click Next . ...
-
Airlink101 AWLH6045 - page 15
15 Step 4 Select the proper encryption setting for your wireless router or access point from the drop-down menu and click Next . Step 5 Follow the on-screen instructions to complete the encryption settings. Click Complete when finished. Step 6 You should see a blue circle around the antenna icon indicating a valid connection. ...
-
Airlink101 AWLH6045 - page 16
16 Step 7 Go to the Link Information tab and click on the More button. Step 8 Verify that you are receiving adequate Si gnal Strength and Link Quality and that you have been assigned a valid IP address (instead of all 0’s). If you do not have adequate Signal Strength, tr y re-orienting the Access Point and/or the antennas of PCI Adapter to get a ...
-
Airlink101 AWLH6045 - page 17
17 4. Configure the Wireless Utility This section describes the various functi ons of the Wireless Utility that you can configure, including the setti ngs of wireless encryption. 4.1 Link Information The Link Information tab shows the current profile in use as well as details of the current network connection. Click on the More button to see the de ...
-
Airlink101 AWLH6045 - page 18
18 The Wireless Information displays the current wireless network you are connected to as well as various other statuses such as the Signal Strength and your assigned IP address. ...
-
Airlink101 AWLH6045 - page 19
19 4.2 AP List The AP List tab displays all the available Access Points detected by the PCI Adapter. Simply select the desired Access Point you wish to connect to and click Connect . The Site Information displays a list of status for the selected AP, including the Channel number and the Encryption status. ...
-
Airlink101 AWLH6045 - page 20
20 4.3 Configure Encryption Settings This section describes how to configure encryption settings for the PCI Adapter . Note: The encryption settings you set for the A dapter must match t he same settings of the Access Point/Wireless Router; otherwise, the encryption will not work properly. Step 1 From the AP List tab, select the Access Point/W irel ...
-
Airlink101 AWLH6045 - page 21
21 Step 3 Verify the Network Name (SSID) is correct and click Next . For WEP Settings: WEP Step 4 Select the appropriate Authentication Mode and Encryption settings and click Next . ...
-
Airlink101 AWLH6045 - page 22
22 WEP Step 5 Select the appropriate Input Method , Key (password), Key Index , and click Next . WEP Step 6 Click Complete to finish the settings. ...
-
Airlink101 AWLH6045 - page 23
23 For WPA-PSK and WPA2-PSK Settings: WPA Step 4 Select WPA-PSK or WPA2-PSK and the appropriate Input Method and click Next . WPA Step 5 Enter the Passphrase and click Next . ...
-
Airlink101 AWLH6045 - page 24
24 WPA Step 6 Click Complete to finish the settings. Step 7 You should see a blue circle around the antenna icon indicating a valid connection. A lock icon beside the antenna indicates the connection is encrypted. ...
-
Airlink101 AWLH6045 - page 25
25 4.4 Profile Setting The Profile Setting tab lists all the profiles you have created. You can create new profiles for different network environments. To add a new profile, follow the steps below: Step 1 Click on the Add button. ...
-
Airlink101 AWLH6045 - page 26
26 Step 2 Enter a name for your new profile and click Next . Step 3 Enter the SSID (Network Name) of the wireless network you want to connect to and click Next . ...
-
Airlink101 AWLH6045 - page 27
27 Step 4 Configure any encryption setting if required and click Next . Step 5 Click Complete to finish the profile setting. ...
-
Airlink101 AWLH6045 - page 28
28 Step 6 Your new profile will be listed in the Profile List. Step 7 You can quickly select which prof ile you want to use from the Link Information tab depending on your network environments wit hout having to reconfigure the settings each time. ...
-
Airlink101 AWLH6045 - page 29
29 4.5 Static IP Setting To change the IP address of the wireless adapter to Static IP, follow the steps below: Step 1 On the last step of 4.4 Profile Setting , under IP setting, select New Setting and click Next . Step 2 Select Static . Step 3 Enter in the information and click Complete to finish the setting. ...
-
Airlink101 AWLH6045 - page 30
30 4.6 About The About tab shows the Utility, Driver, and Firmware version as well as the MAC address of the 300N Wireless PCI Adapter . ...
-
Airlink101 AWLH6045 - page 31
31 Appendix A – Features Frequency Band • 2.4~2.5 GHz Standards • IEEE 802.11b / 802.11g • Draft 802.11n Interface • PCI Antenna type • 3 external antennas with 2.6 dBi(A), 3.6 dBi(B) , 0.9dBi(C) Gain Security • WPA-PSK (TKIP) • WPA2-PSK (AES) Transmitted Power • 802.11b: 17 dBm@1TX; 20 dBm@2TX • 802.11g: 13 dBm@1TX; 16 dBm@2TX ...
-
Airlink101 AWLH6045 - page 32
32 Appendix B – Information Federal Communication Commission Interference S t atement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful interferenc e in a residential installation. This ...
-
Airlink101 AWLH6045 - page 33
33 European Union Notice: Radio products with the CE marking comply with the R&TTE Direct ive (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies co nformity to the following European Norms: z EN 60950 Product Safety z ...
-
Airlink101 AWLH6045 - page 34
34 T echnical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theoretical maximum wireless signal rate derived from IEEE 802.11g standard and IEEE 802.11n draft specification version 1.0. Actual data throughput will vary. Network conditions and environmenta l factors, including volume of network traffi ...
¿Tienes una pregunta acerca de Airlink101 AWLH6045?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Airlink101 AWLH6045, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Airlink101 AWLH6045 probablemente compartirá una forma de solucionarlo.