-
Electrolux 86800 - page 1
LAVAMA T 86800 Wa s h i n g M a c h i n e User information ...
-
Electrolux 86800 - page 2
2 Dear Customer , Please read this user information car e fully and keep it to r efer to later . Please pass the user information on to any futur e owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions War n i n g ! Information that affects your per sonal safety . Important! Information that prevents damage to ...
-
Electrolux 86800 - page 3
3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Electrolux 86800 - page 4
4 Child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 7 ...
-
Electrolux 86800 - page 5
5 Oper ating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions” . • If the appliance is delivered in the winter months when ther e ar e mi- nus temperatur es: store the washing machine at r oom temperatur e for 24 hours befor e using for the first time. Corr ect use ...
-
Electrolux 86800 - page 6
6 • Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug fr om the power point or – if the appliance has been har d-wired – sw itch off the cut- out in the fuse box or completely remove the fuse. • If operation is stopped, disconnect the appliance from the mains sup- ply and tu ...
-
Electrolux 86800 - page 7
7 Description of the appliance Contr ol panel What is shown in the display Deterg ent drawer Screw feet (height adjustable) Plinth flap/ Drain pump Rating plate (behind door) Control panel Progr amme knob and On/Off switch Display Function keys STAR T/P AUSE key COTTONS 12.45 Cycle end at 15.05 95C1000 NýýýýýVýSý FýLýBýaýaýKýT Current ...
-
Electrolux 86800 - page 8
8 Pr ogr amme overview Programme max. Load 1) (dry washing) 1) A 1 0 litre bucket con tains approximat ely 2.5 kg of dry washi ng (cotto n). Options Times Spin s peed RINSE HOLD PREWASH SENSITIVE STAIN NIGHT CYCLE SHORT VERY SHORT DELA Y START 1600/1400 1200 1 000/800/600/4 00 0 ENERGY SAVING 2) 2) Programme settings for testing in accor dance with ...
-
Electrolux 86800 - page 9
9 Progr ammes/features: Car e symbols 1) 1) The nu mbers in the car e symbols show the ma ximum temperatures. Energy-saving programme at 60 °C for light ly to normally soiled whites/colour eds made of cotton/ linen. M O Energy-saving programme at 95 °C f or normally t o heavily soi led whites/co loureds made of cotton/ linen. J M O Genera l progr ...
-
Electrolux 86800 - page 10
10 Prior to using for the first time Switching on the appliance fo r the first time - setting the language The display is set to English as standard in the factory . 3 Important! If the display does not show the menu for setting the lan- guage when the appliance is swit ched on, the appliance has been switched on before. If this happens , please se ...
-
Electrolux 86800 - page 11
11 Setting the time So that the time and the end of th e pr ogramme ar e correctly displayed, please check the display and set the current time if necessary . T o do this, please see the section “Setup/Clock” . Carrying out a wash pr ogram me prior to first use In order to r emove any residues fr om the drum and water container which may have b ...
-
Electrolux 86800 - page 12
12 Running a wash cycle Opening the door/Loa ding the washing 1. To open the door: pull the handle on the door . 2. Unfold washing and load it loosely into the machine. Mix large and small items. Attention! Do not get any washing caught between the door and the rubber seal. 3. Push the door firmly shut. Door catch must audibly click shut. Adding de ...
-
Electrolux 86800 - page 13
13 Washing powder/tablets fo r the main wash cycle If you are using water softener and r equire the right compartment for detergent for the pre-wash cycle, a dd the water softener on top of the detergent for the main wash cy cle in the left compartment. Softener , wash-care products to pr eserve the shape of garments, starch Fill the compartment to ...
-
Electrolux 86800 - page 14
14 Changing the temper ature Press the TEMP . key r epeat- edly until the desired tem- pe ra t u re is displayed. Changing spin speed/selecting rinse hold Press the RPM key r epeated- ly , until the de sired spin speed or RINSE HOLD is displayed. 3 • With spin speed “0” the last rinse water is drained off at the end of the cycle, but the wash ...
-
Electrolux 86800 - page 15
15 Setting options Options can be added to a wash cycle that has already been selected. Press the OPTIONS key . The display shows the symbols for the options. 3 Only the options that can be combin ed with the cycle that has already been set are shown in the display . PREWASH Pre-washes at about 30 °C befor e the main wash cycle, which follows auto ...
-
Electrolux 86800 - page 16
16 Pr ewash, Sensitive, Stain, Night Cycle 1. Press the OPTIONS key r e- peatedly until the desired symbol flashes, e. g., PREWASH. (With each pr ess of the key , the next symbol flashes – moving from left to right.) 2. Press the OK key . The symbol stops flashing. A black bar appears under the symbol. The option is set. The display changes to th ...
-
Electrolux 86800 - page 17
17 Setting times Shortened cycles and the delay of th e start time can be set for a wash cycle that has alr eady been selected. Press the TIME key . The display show s the symbols for Time Saving and Delay Start. Time Saving: SHORT or VERY SHORT 1. Press the TIME key r epeated- ly , until the SHORT symb ol flashes. 2. Press the OK key . 3. Press th ...
-
Electrolux 86800 - page 18
18 Delay Start 1. Press the TIME key repeatedly , until the DELA Y ST ART symbol flashes. 2. Press the OK key . “Start in 0 min” is shown in the displa y . 3. Press the TIME key r epeated- ly , until the displ ay shows the desired period by which you want to delay the start, e. g. “Start in 4 h” (= 4 hour s). A black ba r appear s under the ...
-
Electrolux 86800 - page 19
19 Starting a pr ogramme 1. Check that the water tap is open. 2. Press the S TART/P AUSE key . The progr amme is started or it starts after the time delay set has elapsed. 3 If after pressing the ST ART/P AUSE key the display shows “Door not Closed”, the door has not been shut properly . Push the door firmly closed and press the START/P AUSE ke ...
-
Electrolux 86800 - page 20
20 W ashing cycle complete / Removing the washing At the end of the cycle a long acoust ic signal sounds 3 times (when the SOUND setting is NORMAL or LOW) and the messages “Cycle ended” and “Door openable” appear alternately in the display . 1. Open the door and remove the washing. 2. Turn the progr amme knob to OFF . 3. T urn off the tap. ...
-
Electrolux 86800 - page 21
21 Setup The special functions that can be set under Setup re main permanently stored independent of each washing cycle – even after the appliance has been switched off or the mains plug has been removed fr om the socket. Memory 1, 2, 3 Progr amme combinations can be stored at pr ogramme knob positions MEMORY 1, 2, 3 and can then be selected usin ...
-
Electrolux 86800 - page 22
22 7. Press the OK key . The progr amme combination is no w stor ed to progr amme knob posi- tion MEMORY 1 and in the future can be selected dir ectly using the progr amme knob . 3 The Memory can be overwritten at any time with a new progr amme combination (see “Changing the Memory”), but cannot be deleted. Changing the Memory 1. Put together t ...
-
Electrolux 86800 - page 23
23 Extr a Rinse 1. Turn the progr amme knob to any progr amme and press the OPTIONS key repeatedly until the SETUP symbol flashes. 2. Press the OK key . 3. Press the OPTIONS key r e- peatedly until EXTRA RINSE is shown in the display . 4. Press the OK key . The EXTRA RINSE symbol appears. The icon changes to the next special function. 5. Press the ...
-
Electrolux 86800 - page 24
24 Clock 1. Turn the progr amme knob to any progr amme and press the OPTIONS key repeatedly until the SETUP symbol flashes. 2. Press the OK key . 3. Press the OPTIONS key r epeatedly until CLOCK is shown in the displ ay . 4. Press the OK key . 5. Using the OPTIONS key set the desired time. With each press of the key , the display moves on by one mi ...
-
Electrolux 86800 - page 25
25 Child safety device If the child safety device has been activated, the door can no longer be shut. Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go. 1 War n i n g ! The knob must not be de- pressed after being set, otherwise the child safety device is not ...
-
Electrolux 86800 - page 26
26 Cleaning and car e Important: Do not use furniture cleaning pr oducts or aggressive clean- ing agents to clean the appliance. Wipe over the control panel and housing with a damp cloth. Deter gent drawer The detergent dr awer should be cleaned r egularly . 1. Remove the detergent dr awer by pulling firmly . 2. Remove the softener insert from the ...
-
Electrolux 86800 - page 27
27 What to do if... Remedying small malfunctions If while the appliance is operating a short acoustic signal sounds 3 times and one of the following me ssages appears in the display: – “No incoming water/Check tap & Hose”, – “No drain/Check dr ain hose/filter” or “Pump Blocked”, – “Door not Closed”, please have a look at t ...
-
Electrolux 86800 - page 28
28 The washing machine vi- brate s when oper ating or is not stable. Tr ansit bar has not been rem o ve d . Removing the tr ansit bar . The scr ew feet not cor- rec tly adjusted. Adjust feet according to the Installation an d Connection instructions. There is very little wa sh- ing in the drum (e. g., just one bat hrobe). This does not affect how t ...
-
Electrolux 86800 - page 29
29 If the wash r esult is not satisfactory The washing is grey and there ar e limescale deposits in the drum • Too little deter gent was used. • An incorrect deter gent was used. • Individual stains were not pr e-treated. • The progr amme or temperatur e was not set pr operly . There ar e grey stains on the washing • Items that were soile ...
-
Electrolux 86800 - page 30
30 Carrying out an emer gency drain 1 War n i n g ! Prior to carrying out an emergency dr ain, switch off the washing machine and remove the pow er plug fr om the power point. War n i n g ! The water that comes out of the emergency dr ain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency dr ain! 1. Open ...
-
Electrolux 86800 - page 31
31 Dr ain pump The drain pump is maintenance-fr ee. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that ther e are no for- eign bodies present in the pockets or in between the items to be washed. P aper ...
-
Electrolux 86800 - page 32
32 T echnical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low V oltage Directive – 89/336/EEC dated 03.05.1989 EMC Di rective inclusive of Amending Directive 92/3 1/EEC – 93/68/EEC dated 22.0 7.199 3 CE Marking Dire ctive Consumption values The consumption values wer e obtained under standar d ...
-
Electrolux 86800 - page 33
33 Installation and connection instructions 1 Safety information concerning installa- tion • This washing machine cannot be built-in . • Before using for the fir st time, ch eck the appliance for damage sus- tained while it was being transpor ted. Do not under any circumstanc- es connect an appliance that is damaged to the mains. In the event o ...
-
Electrolux 86800 - page 34
34 Installing the appliance T ransporting the appliance 1 War n i n g : The washing machine is very heavy . There is a risk of injury . Exercise car e when lifting the appliance. • Do not lay the w ashing machine on its front nor on its right side (as seen fr om the front). Elec trical components may get wet. • Never transport the appliance wit ...
-
Electrolux 86800 - page 35
35 3 Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance. 3. Use special spanner A to remove screw D and the compr ession spring. 4. Use sealing cap C to cap the hole. 5. Use special spanner A to remove the two screws E. 6. Use special spanner A to remove the four screws F . 7. Remove transit bar G. 8. Sc re w i n ...
-
Electrolux 86800 - page 36
36 Making the appliance level The four feet of the appliance are pre-adjusted. Large degr ees of unevenness can be compensated for by adjusting the four feet of the appliance. Use the special spanner supplied to do this. Important: Do not use pieces of wood, cardboar d or such like to level out small degr ees of unevenness in the floor . Adjust the ...
-
Electrolux 86800 - page 37
37 Electrical Connection Any electrical work requir ed to inst all this appliance should be carried out by a qualified electrician or competent person. 1 WARNING – THIS APPL IANCE MUST BE EARTHED. The manufacturer declines any liabili ty should these safety measur es not be observed. Before switching on, make sur e th e electricity supply voltage ...
-
Electrolux 86800 - page 38
38 The switch must not break the yellow and green earth cable at any point. This appliance complies with the r e quirements laid out in the EEC Di- rective 76/899. Voltage 240 V AC: Fuse rating 13 amps See rating plate for further information. This appliance meets VDE requir ements. P articular regulations of local electricity authorities must be o ...
-
Electrolux 86800 - page 39
39 W ater inlet A 1.35 m long pressur e hose is supplied with the appliance. If a longer inlet hose is required, only hoses fr om the manufacturer ar e to be used. Service Force stocks hose kits of differ ent lengths. 3 Sealing rings are either inserted in th e plastic nuts of the thr eaded hose fitting or are included as spar e pa rts. Do not use ...
-
Electrolux 86800 - page 40
40 Wa t e r D ra i n a g e The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed usin g the plas tic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring ther e is an air br eak between the drain hose and standpipe. Important! It is essentia ...
-
Electrolux 86800 - page 41
41 Pumping heights of over 1 metr e The washing machine’s drain pump is able to pump water to a height of 1 metre, calculated from the surface on which the appliance is installed. Important! If pumping height is over 1 metre malfunctions and dam- age to the appliance may arise. For pumping heights over 1 metre a conversion kit can be obtained. Pl ...
-
Electrolux 86800 - page 42
42 W arr anty conditions Gr eat Britain Standard guarantee conditions We, AEG, undertake that if withi n 12 months of the date of the purchase this AEG appliance or any part ther eof is prove d to be defective by r eas on only of faulty workmanship or materials, we will, at our discr etion repair or r eplace the same FREE OF CHARGE for labour , mat ...
-
Electrolux 86800 - page 43
43 Service and Spar e P arts If the event of your appliance r equir ing service, or if you wish to pur- chase spare parts, please contact Service For ce by telephoning: Y our telephone call will be automatically routed to the Service For ce Centre covering your post code area. For the address of your local Servic e Force Centre and further informa- ...
-
Electrolux 86800 - page 44
From the El ectrolux Gr oup . The world´s No.1 choice. The Electrolux Gr oup is the world´s largest pr oducer of powere d appliances for ki tchen, cleaning and outdoor use. More than 55 million Electrolux Gr oup products (such as refrigerators, c ookers, washing machines, vacuum cleaners, chain saws and lawn mowers) ar e sold each year to a va lu ...
¿Tienes una pregunta acerca de Electrolux 86800?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Electrolux 86800, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Electrolux 86800 probablemente compartirá una forma de solucionarlo.