-
EverFocus ED335 - page 1
1/3” CCD Indoo r 3-Axis Dual V oltage T rue Day/Night IR Dome Came ra Operation Instructions Model No. ED335 Please read this manual first for correct installation and operation. This manual should be re t ained for fu tur e reference. The information in this manual wa s current when published. The manufacturer re serves the right to revise and i ...
-
EverFocus ED335 - page 2
1 PRODUCT OVER VIEW ED335 is a new design IR Dome camera from Everfo c us. It incorporates breakthrough DSP technolog y to provide brilliant color images in well lit environmen ts. Using a SONY Super HAD CCD image sensor, the ED335 also delivers excellent true day/night low light performance, and equipped with 34 long lifespan/high illumination IR ...
-
EverFocus ED335 - page 3
2 Power supply pigtail Video test cable Accessory pack #2 containing t wo flush mounting clips DIMENSIONS ...
-
EverFocus ED335 - page 4
3 SPECIFICA TIONS Pickup Device 1/3” SONY Super HAD CCD Video Format NTSC or P AL Scanning System NTSC: 525 TV lines, 60 fields/sec; P AL: 625 TV lines, 50 fields/sec. Picture Element 768 x 494 (NTSC); 752 x 582 (P AL) Horizontal Resolution 520 TV Lines Sensitivity 0 Lux (IR LED on) 0.4 Lux/F=1.2 (AGC ON) Day/Night T ype T rue Day/night with ICR ...
-
EverFocus ED335 - page 5
4 MAJOR P AR TS: NAMES AND FUNCTIONS Front View Side View 2. IR LEDs 4. Light sensor 1. Outer Base 6. Focus Adjust 8. Video Output 9. Power Input 3. Lens 5. Cover 7. Zoom Adjust ...
-
EverFocus ED335 - page 6
5 Back V iew 1. Base The camera unit sets in the dome base, when it is s hipp ed from the factory . This base is used for surface mounting, and is discarded fo r fl ush mounting. 2. IR LEDs 3. Lens The included vari-focal, DC iris lens allows manual adjustment of the field of view (zoom & focus). The choices for focal length range are: 1) 2.8-1 ...
-
EverFocus ED335 - page 7
6 7. Zoom Ring T o adjust the viewing angle, loosen t he zoom ri ng knob. T urn the ring toward <W> to Zoom out or <T> to Zoom in as necessary , and re-tighten when the a djustment is complete. 8. Video Output Please connect to the BNC connecto r of the cable from the DVR or monitor . 9. Power Input Please connect this conne c tor to a ...
-
EverFocus ED335 - page 8
7 3-AXIS GIMBAL BRAC KET The 3-axis gimbal enables installers to easily moun t the camera on a wall or ceiling and then using the built in tilt and dual axis 180° twist, to adjust the viewing a n gle to the desired direction. With this unique 3-axis positioning system, installers can capt ur e images from virtually any angle, without compromising ...
-
EverFocus ED335 - page 9
8 INST A LLA T I ON An ED335 camera may be mount ed in two ways: surface mount and flush mount. Select the one that meets your needs. Installation - Surface Mount 1. Paste the drilling template on the ceiling or wall. P le ase refer to the drilling template belo w . 2. Use the appropriate tool to drill the INNER holes, and a clearan c e hole for th ...
-
EverFocus ED335 - page 10
9 4. Remove dome cover (4 captive hex head screws); re m ove inner base from outer base (4 Phillips head screws – retain these for later re-assembly). 5. Pull the cables to be connected to power and video ca bles into the outer base from the ceiling or wa ll. Attach power supply pigtail adapter to power wire if needed . 6. T a ke a long Phillips ...
-
EverFocus ED335 - page 11
10 7. Attach power and video cables from source to c ables from camera and push exce s s wire back into hole. 8. Insert inner base into outer base and se c ure using the 4 Phillips removed in the earlier step . Preposition camera so it is facing approximately in the desired direction. 9. Atta c h video test cable to test point on rear of camera mod ...
-
EverFocus ED335 - page 12
11 10. Once the camera view is as desired, attach the cover to oute r base with the captive hex head screws. ...
-
EverFocus ED335 - page 13
12 Installation - Flush Mount 1. Paste the drilling template on the ceiling or wall. P le ase refer to the drilling template belo w . 2. Use the appropriate tool to drill the OUTER holes; carefully cut a lo ng the dashed circle to create a clearance hole for the inner base unit. Note: The minimum recommended mat erial thickness is 1 cm. 3. Pull the ...
-
EverFocus ED335 - page 14
13 5. Unscrew the 4 Philips screws (retain f or future use) to detach the inner base from the o uter base. Set aside the outer base. 6. Screw the 2 spring tabs in the orientation shown t o the slots at both sides of the inner base using the 4 Philips head screws provided. Attach the screws to the places marked “Fix”. ...
-
EverFocus ED335 - page 15
14 7. Atta c h power and video cables from source to cab les from camera and push excess wire ba ck i nto hole. Fold the spring tabs up. 8. Preposition camera so it is facing approximate ly in the desired direction. 9. Push the entire inner base into ceiling while holding the spring tabs with both hands. ...
-
EverFocus ED335 - page 16
15 10. The spring tabs will open automatically to support the camera against the ceiling. 1 1. Use the long Phillips pan head screws (x4) provided to screw the base to the ceiling. Do NOT us e washers. ...
-
EverFocus ED335 - page 17
16 12. Attach video test cable to test point on rear of camera modu le . Aim and focus the ca mera. Remove test cable. 13. Screw the cover back to the base with capt ive hex head screws. ...
-
EverFocus ED335 - page 18
17 Headquarters Of fice 12F, No.79 Sec. 1 Shin-Tai W u Road, Hsi-Chi, Taipei , Taiwan Tel: +886-2-26 982334 Fax: +886-2-2 6982380 Beijing office Room 609,T echnology Trade Bui lding. Shangdi Inf ormation Industr y Base, Haidian Distr ict,Beijing China Tel: +86-10-62 971096 Fax: +86-10-6 2971423 European Of fice Albert-Einste in-S trasse 1, D-46446 ...
¿Tienes una pregunta acerca de EverFocus ED335?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con EverFocus ED335, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con EverFocus ED335 probablemente compartirá una forma de solucionarlo.