-
Haier HWM80-0626SH - page 1
HWM80-0626S T win-tub Washing Machine User's manual This manual is for Please read this manual carefully before using. Retain it for future reference. HWM80-0626SH 0030807884 ...
-
Haier HWM80-0626SH - page 2
Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names of the parts Trouble-Shooting *Answer to question ...
-
Haier HWM80-0626SH - page 3
1 Control panel seat Outer cover of the spin tub Inner cover of the spin tub Spin timer Spin tub frame Spin tub Front door Power cord Control panel Bypass channel Overflow filter Water level adjust lever Water filling control h andle Drain hose Cabinet handle Wash tub Base frame Lint filter Cabinet Plate support(right) Wash timer Water-filling entr ...
-
Haier HWM80-0626SH - page 4
2 Safety precautions Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably . If possible, please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily ...
-
Haier HWM80-0626SH - page 5
3 Pe tr ol T h in ner Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow . T ake special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not wash laundries wi ...
-
Haier HWM80-0626SH - page 6
4 B A > 30mm <1.5m <10cm Installa tion and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose The drain hose shall drain smoothly 1. The height of the drain hose shall be less than 10cm, or the drainage ...
-
Haier HWM80-0626SH - page 7
5 How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. T ake off the drain hose from the cabinet. Dismantle the drain hose fixing clamp and take the hose out of the fixing groove. ...
-
Haier HWM80-0626SH - page 8
6 Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please m ...
-
Haier HWM80-0626SH - page 9
7 The musts in washing The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- able to put in reasonable amount of laundries and the laundr ...
-
Haier HWM80-0626SH - page 10
WAT ER INLET SELECTOR 8 Page7 WASH SPIN Not set the switch to DRAIN during washing 3 2 4 5 1 WASH TIMER OFF OFF DRAIN SWITCH OFF DRAIN 1.Water-filling selector 1 Set the water inlet selector at the "WASH" side. (Figure 1) 2 Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make t ...
-
Haier HWM80-0626SH - page 11
W ash When filling water t o MAX or MED and MIN water levels, turn the SELECTOR to the CALEF ACTION after p ut in the laundries. It begins to heat a fter close the wash tub, when the temperature reaches , the Buzzer will give an musical alarm. Then turn the selector to "ST ANDARD" or "SOFT" , the heater will stop heating and the ...
-
Haier HWM80-0626SH - page 12
10 Midway spinning 1. Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. No gland Proper The laundries are slanting Proper Push Gland Push Outer cover of The spin tub Inner cover of The spin tub (2) Close the inner and outer cover o ...
-
Haier HWM80-0626SH - page 13
11 Rinse with stored water Rinse with water-filling Rinsing 1.Put the la undries into t he wash tub . Select su itable current according to the laundries. 2.Adjust the water level S et the water level with water level adjusting lever accordin g to the laundries quantity . T hen fill suit able water c ontinuously . 3.Rinse Adjust the w ash timer t o ...
-
Haier HWM80-0626SH - page 14
Spinning 12 1.Put the laundries into the spin tub evenly and smoot hly. 2.Press t he gland in the tub properly. Close the inner and oute r cover of the spin tub. 3.Spin Select su itable spin time according to the laundries, and do spinning. During sp inning, if there is abnormal sound, it is generally owing to slanting p lacement of the laundries. ...
-
Haier HWM80-0626SH - page 15
13 Page 8 After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. It must be cleaned in time after each using. Cleaning the lint fi ...
-
Haier HWM80-0626SH - page 16
14 After washing, dismou nt the water inlet hose. Do not store w ater in the tub for long period. Discharge the water immediately after each using. Pull off the power plug and hang up the power cord. Hang up the drain hose. Wipe off the water drops on the surface and inside th e tub with clean soft cloth. Open the cover of the wash tub and the inne ...
-
Haier HWM80-0626SH - page 17
15 Please check carefully. The laundries may fall to the lower part of the outer side of the spin tub ( Figure 2). If the laundries fall to the outer side of the spin tub, during spinning the draining will get blocked and the rotation speed of the spin tub is reduced. T r ouble-shooting Ans wers to question If the laundries fall to the outer side o ...
-
Haier HWM80-0626SH - page 18
16 T ro uble-shooting Ans wers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company ...
-
Haier HWM80-0626SH - page 19
17 0.02 0.2 8.0/6.0 Packing list One piece Name Quantity User's manual One piece One piece One set W ater inlet hose Gland Twin-tub washing machine Specification Maximum/71 Medium/60 Minimum/49 Water level / Water quantity (about)(L) Injection pressure(MPa) Rated washing / spinning capacity kg One piece Warranty card ...
¿Tienes una pregunta acerca de Haier HWM80-0626SH?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Haier HWM80-0626SH, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Haier HWM80-0626SH probablemente compartirá una forma de solucionarlo.