-
Polycom SPECTRALINK 6000 - page 1
July 2008 Edition 1725-36130-001 Version E Avaya DEFINITY Communications System LinkPlus Interface Guide SpectraLink 6000 System SpectraLink 8000 System ...
-
Polycom SPECTRALINK 6000 - page 2
LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries. All ot her trademarks used herein are the proper ...
-
Polycom SPECTRALINK 6000 - page 3
PN: 1725-36130-001_E.doc 3 About this Guide Polycom is the market leader in multi-cellular wireless telephone systems for the workplace. We manufacture a range of products to suit any size installation. All Polycom products use our Lin kPlus digital integration technology to inte grate with various digital switch platforms. Using LinkPlus technolog ...
-
Polycom SPECTRALINK 6000 - page 4
LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 4 Related Documents SpectraLink 6300 MCU : Operator’s Console (1725-36125-001) SpectraLink 6100 MCU: Installation and Operation (1725-36097-001) SpectraLink 6020 Wireless Telephone and Accessories User Guide (1725-36092-001) Available at http://www.polycom.com ...
-
Polycom SPECTRALINK 6000 - page 5
About this Guide PN: 1725-36130-001_E.doc 5 Icons and Conventions This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. Label This typeface indicates a key, label, or button on SpectraLink hardware. ...
-
Polycom SPECTRALINK 6000 - page 6
...
-
Polycom SPECTRALINK 6000 - page 7
PN: 1725-36130-001_E.doc 7 Plan the Interface The system administrator programs the telephone system for use with the Wireless Telephone System using the normal administration terminal or procedures. Programmi ng can be done after the hands ets are registered. Recommended programming includes assigning extension numbers to the handsets and programm ...
-
Polycom SPECTRALINK 6000 - page 8
LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 8 “model” handsets then use the mod el as a template to program the other handsets. • All handsets are different : All handsets are programmed differently, so each handset will be programmed individually. Before installation, the parameters of the wired ph ...
-
Polycom SPECTRALINK 6000 - page 9
Plan the Interface PN: 1725-36130-001_E.doc 9 It will help to identify a wired set that is programmed exactly or close to the way the handsets should be programmed. This set ca n be duplicated to copy station parameters to the handsets. Assign Extension Numbers The wire contractor should inform the system administrator which port numbers have been ...
-
Polycom SPECTRALINK 6000 - page 10
LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 10 When lines are programmed as shown on the k ey-map diagrams, the numeral icons on the handset display will be mapped to any deskset LEDs associated with the corresponding feature keys. The line icons will be displayed as follows: Line State Handset Line Statu ...
-
Polycom SPECTRALINK 6000 - page 11
Plan the Interface PN: 1725-36130-001_E.doc 11 Function Menu Programming SpectraLink 6300 MCU Note that the function menu defaults set for the handset s associated with the SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s Console. If the system uses softkeys, to minimize unwanted interaction between system display and the ha nds ...
-
Polycom SPECTRALINK 6000 - page 12
LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 12 Hold The Hold feature should be programmed to the HOLD key as shown on the Key-map Diagrams so that when t he HOLD key or softkey is pressed on the handset, the call is placed on hol d. Mute The handset Mute function is hard-coded on the PTB 4x x handset to F ...
-
Polycom SPECTRALINK 6000 - page 13
PN: 1725-36130-001_E.doc 13 Interface Implementation This section describes the recommended programming to use the SpectraLink 6000 System with a DEFINITY Communications System. The procedures assume: • The DEFINITY system is installed and operational in an ap proved configuration. See the Telephone Switch Interface Matrix document for tested con ...
-
Polycom SPECTRALINK 6000 - page 14
LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 14 DEFINITY Four-Wire Interface The DEFINITY TN754B (any vintage) or TN754 (vintage 11 or higher) circuit pack provides eight, four-wir e digital station circuits. Two of these wires are used for transmit, tw o are used for receive. Typically the stations are wi ...
-
Polycom SPECTRALINK 6000 - page 15
Interface Implementation PN: 1725-36130-001_E.doc 15 See the documentation for your SpectraLink components for more information about wiring the dema rc block or patch panel. The following table shows the patch cord pinout for the Avaya side of the modular 8-pin (RJ45) connector. Pin Function 1 Receive 2 Receive 3 Transmit 6 Transmit Each digital p ...
-
Polycom SPECTRALINK 6000 - page 16
LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 16 Key-mapping the Handset to Emulate 8410D Functionality Programmable buttons on Page 2 of the station fo rm can be assigned as determined in the pre-installa tion procedures. The following diagram shows how the 8410D buttons map to the handset. LINE 1 LINE 2 L ...
-
Polycom SPECTRALINK 6000 - page 17
Interface Implementation PN: 1725-36130-001_E.doc 1 7 is the sequence equivalent to pre ssing the corresponding softkey on the desk set. The handset function menu default settings are shown on e ach corresponding button in the above diagram; these may be changed as described above in Function Menu Programming . Some of these functions (Mute, Redial ...
-
Polycom SPECTRALINK 6000 - page 18
LinkPlus Interface Guide: Avaya DEFINITY Communications System PN: 1725-36130-001_E.doc 18 settings so they can be manually duplicated using an add s tation command for the template handset. Station features for handset Station features on Page 1 of the sta tion form can be assigned or copied as determined in the pr e-installation procedures. The f ...
-
Polycom SPECTRALINK 6000 - page 19
Interface Implementation PN: 1725-36130-001_E.doc 19 • To make the handset ring when the wired station rings, cha nge Bridged Call Alerting to Yes on the wired station. If the handset is not a bridged appear ance of a wired station, assign buttons 1-3 as call appearances (call-appr). Duplicate programming After the model handset or phones have be ...
-
Polycom SPECTRALINK 6000 - page 20
...
-
Polycom SPECTRALINK 6000 - page 21
PN: 1725-36130-001_E.doc 21 Extension Assignments Worksheet Shelf: _______ Interface Module: _______ Handset # Ext. # Name Interface Module Circuit # Comment Handset Serial # Handset 1 1 Handset 2 2 Handset 3 3 Handset 4 4 Handset 5 5 Handset 6 6 Handset 7 7 Handset 8 8 Handset 9 9 Handset 10 10 Handset 11 11 Handset 12 12 Handset 13 13 Handset 14 ...
¿Tienes una pregunta acerca de Polycom SPECTRALINK 6000?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Polycom SPECTRALINK 6000, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Polycom SPECTRALINK 6000 probablemente compartirá una forma de solucionarlo.