-
Electrolux 2460 D - page 1
2460 D Cooker hood Operating and Installation Instructions ...
-
Electrolux 2460 D - page 2
2 Printed on recycled paper AEG - putting words into action ...
-
Electrolux 2460 D - page 3
3 Contents Safety warnings 4 For the User 4 For the Installer 4 Description of the Appliance 6 Extractor version 6 Filter V ersion 6 Control Panel 7 Maintenance and care 8 Cleaning the hood 8 Metal grease filter 8 Removing the metal grease filter 8 Charcoal filter 1 0 Changing the light bulb 1 1 What to do if 1 2 Service and Spare Parts 1 3 Guarant ...
-
Electrolux 2460 D - page 4
4 Safety warnings For the User • The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal fired cookers it is essential to avoid open flames. • Also, when frying, keep the deep fryi ...
-
Electrolux 2460 D - page 5
5 • It is advisable to apply for authorization from the relevant controlling authority when connecting the outlet to an unused chimney flue or combustion gas duct. The air outlet installation must comply with the regulations laid down by the relevant authorities. • When the unit is used in its extractor version, a sufficiently large ventilation ...
-
Electrolux 2460 D - page 6
6 Description of the Appliance • The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter • Y ou will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre). Extractor version • The air is discharged to the outside through a hos ...
-
Electrolux 2460 D - page 7
7 Control Panel • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking, you will then get an under pressure in the kitchen. The hood should be left on after cooking for about 15 minutes or until all the odours have disappear ...
-
Electrolux 2460 D - page 8
8 Maintenance and care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Cleaning the hood • Clean the outside of the hood using a damp cloth and a mild deter- gent. • Never use corrosive, abrasive or flammable cleaning products. • Never insert pointed objects in the motor’s protecti ...
-
Electrolux 2460 D - page 9
9 Dishwasher Place grease filters in dishwasher . Select the most powerful washing programme and highest temperature, at least 65°C. Repeat the process. Refit the grease filters when they are dry . When washing the metal grease filter in the dishwasher a slight discolouration of the filter can occur , this does not have any impact on its performan ...
-
Electrolux 2460 D - page 10
10 Charcoal filter • The charcoal filter should only be used if you want to use the hood in its filtering function. • T o do this you will need an original AEG charcoal filter . • Replacing the charcoal filter The charcoal filters cannot be cleaned, we recommend that they should be replaced approximately every three months or more often if th ...
-
Electrolux 2460 D - page 11
11 Fig. 5 W arning • Failure to observe the instructions on cleaning the unit and changing the filters could cause a fire hazard. Y ou are therefore strongly recommended to follow these instructions. • The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to ob ...
-
Electrolux 2460 D - page 12
12 What to do if If your appliance fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start... Check that: The hood is connected to the electricity supply. Check that the fan speed control is set to 1, 2 or 3. The cooker hood is not working Check that: effectively.. The fan speed is set high enou ...
-
Electrolux 2460 D - page 13
13 Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning 08705 929 929 Y our call will be automatically routed to the Service Centre covering your post code area. For the address of your local Service Force Centre and further infor ...
-
Electrolux 2460 D - page 14
14 Guarantee conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser , which must be verified by purchase invoice or similar documentation. The guarantee does not cover commercial use. 2. The guarantee co ...
-
Electrolux 2460 D - page 15
15 Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0) 44 62 29 29 Germany Nürnberg +49 (0) 800 234 7378 Italy Pordenone + 39 (0) 80 ...
-
Electrolux 2460 D - page 16
16 T echnical Specifications Models 2460 D Dimensions - extractor version (in cm): Height 68-1 13 Width 59 ,8 Depth 4 5 Dimensions - filter version (in cm): Height 67,5-122,5 Width 59 ,8 Depth 4 5 Maximum absorbed power: 195 W Motor absorption: 1 x 155 W Lighting: 2 x 20W Length of the cable : 150 cm Mounting accessories included 6 wall plugs Ø 8 ...
-
Electrolux 2460 D - page 17
17 Electrical connection Safety warnings for the electrician The electric outlet should be placed inside the chimney .The hood has a power cable, 150 cm, with earth connection and the rated voltage is 220 - 240 V . Connect the hood to the mains supply via a double pole switch which has 3 mm minimum separation between the contacts. This switch must ...
-
Electrolux 2460 D - page 18
18 W all unit mounting - Fig. 6 • Only for extractor version: position the upper section of the chimney so that the oulet slots H are not visible (see also A-B-C sequence on on Fig. 6 ). • Fix each other both parts of the hood (1) , make all connections between the two parts (2) and fix with 6 screws (3) . • Mark the wall with a centre line, ...
-
Electrolux 2460 D - page 19
19 20b 20b 7-16 7-16 4 5 6 12 13 8 9 14 14 15 18 20a 20a 9 8 19 8 9 1 17 2 B G H 11 11 10 1 1 1 1 3 3 3 3 21 22 F 17 12 13 10 22 Fig. 6 A-B-C, Extractor version only! NOTE: 18 not supplied ...
-
Electrolux 2460 D - page 20
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http:// www .aeg.hausgeraete.de © Copyright by AEG LI1UGB Ed. 04/02 LI1UGB Ed. 04/02 ...
¿Tienes una pregunta acerca de Electrolux 2460 D?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Electrolux 2460 D, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Electrolux 2460 D probablemente compartirá una forma de solucionarlo.