Español dropdown-ico

Manual de instrucciones Graco 243482

30 de páginas 0.29 mb
Descargar

Pasar a la página of 30

Summary
  • Graco 243482 - page 1

    AIR OPERA TED, SINGLE COMPONENT DISPENSE V AL VE 1K Ultra–Lite t For dispensing a wide variety of single component sealants and adhesives. 4000 psi (28 MPa, 276 bar) Maximum Fluid Working Pressure 120 psi (0.84 MPa, 8.4 bar) Maximum Air Inlet Pressure See page 2 for T able of Contents Part No. 965766 Stainless Steel Wetted Parts, Machine Mount V ...

  • Graco 243482 - page 2

    2 308876 T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation/Maintenance 8 . . . . . . . . . . . . . . . . . ...

  • Graco 243482 - page 3

    3 308876 W ARNING INSTRUCTIONS EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury . D This equipment is for professional use only . D Read all instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose. If you are uncert ...

  • Graco 243482 - page 4

    4 308876 W ARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury . D Ground the equipment and the object being sprayed. Refer to Grounding on page 6. D If there is any static sparking or you feel an electric shock while using ...

  • Graco 243482 - page 5

    5 308876 Features Fig. 1 8374 A 4 Control Configurations 1. 1/8 npt(f) ported manifold block 2. Direct solenoid mount with speed control 3. Handle kit with 4-way air valve 4. Handle kit with electric switch Accessory flow control fittings to adjust open/close speed. Shaft is free to align Aluminum or stainless wetted housings Snuff back restrictor ...

  • Graco 243482 - page 6

    6 308876 Installation NOTES: D Reference numbers and letters in parentheses in the text refer to the callouts in the figures and drawings. D Accessories are available from your Graco representative. If you supply your own accessories, be sure they are adequately sized and pressure-rated to meet the system’s requirements. Grounding W ARNING FIRE A ...

  • Graco 243482 - page 7

    7 308876 Installation Connections D The fluid inlet is 1/4 npt(f). D The fluid outlet is 1/4 npt(f) or 3/4–16 unf(m). D Air inlets are 1/8 npt(f). D See Accessories , page 25, to order air control valves and tubing. Electric Switch Hand Held V alve Install a remote 4-way air control valve to operate the valve. Connect an OPEN air signal air line ...

  • Graco 243482 - page 8

    8 308876 Operation W ARNING COMPONENT RUPTURE HAZARD T o reduce the risk of over-pressurization, which can cause component rupture and serious injury , never exceed 3000 psi (21 MPa, 207 bar) fluid pressure, or 120 psi (0.84 MPa, 8.4 bar) air pressure to the valve. Pressure Relief Procedure W ARNING The system pressure must be manually relieved to ...

  • Graco 243482 - page 9

    9 308876 Operation Air Switch Hand Held V alve The valve operation is such that there are only two valve conditions: either fully open or fully closed. The valve is opened and closed by the internal air control valve. Trigger the gun to open the valve. Release the trigger to close the valve. Shaft Stroke Adjustment (Models 965766, 965767, 965768, a ...

  • Graco 243482 - page 10

    10 308876 T roubleshooting W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. SKIN INJECTION HAZARD 1. Relieve the pressure. 2. Check all possible causes to the problem before disassembling the pump. PROBLEM CAUSE SOLUTION V alve does not open Insuff ...

  • Graco 243482 - page 11

    11 308876 Service (Models 965766, 965767, 965768, and 965786 only) W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. SKIN INJECTION HAZARD Disassembly 1. Relieve all air and fluid pressure . 2. Disconnect the valve from the system. 3. Remove the fou ...

  • Graco 243482 - page 12

    12 308876 Service (Models 965766, 965767, 965768, and 965786 only) Reassembly Air Cylinder Section 1. Lubricate the shaft o-rings (4) and the bearings (5) with grease supplied in the repair kit. Insert o-rings into the air cylinder (1) and air cap (1 1) cavities. See Fig. 5. 2. Press the bearings (5) flush into the air cylinder housing and air cap, ...

  • Graco 243482 - page 13

    13 308876 Service (Models 965766, 965767, 965768, and 965786 only) Air V alve (if equipped) 1. Insert the spring (51) into the housing (50). 2. Lubricate and install an o-ring (46) into the housing. 3. Install a spacer (52), internal bevel first, into the housing. 4. Lubricate and install two o-rings (46) and the spacer (51). 5. Lubricate and insta ...

  • Graco 243482 - page 14

    14 308876 Service (Models 965766, 965767, 965768, and 965786 only) 8371A 29 10 16 6 5 3 4 28, 29 20 21 22 39 41 23 40 38 25 27 Fig. 5 1 3 4 2 26 19 18 1 12 11 30 56 61 60 53 54 55 46 47 48 49 51 52 58 59 57 50 8370A T ighten to 15–20 in-lb (1.7–2.2 N S m). The shaft should hang with some play to be self-aligning in the bearing. Tighten to 15– ...

  • Graco 243482 - page 15

    15 308876 Notes ...

  • Graco 243482 - page 16

    16 308876 Parts (Models 965766, 965767, 965768, and 965786 only) 8371A 1 19 18 26 30 12 2 (965766 & 965786 only) 9 10 16 11 7 6 5 3 4 28, 29 20 21 22 39 41 23 40 15 38 25 27 42 43 44 15 ...

  • Graco 243482 - page 17

    17 308876 Parts Model 965766 Machine Mount V alve Stainless steel wetted parts Model 965786 Automatic Machine Mount V alve Aluminum wetted parts Model 243482 Orbiter Mounted V alve Stainless steel wetted parts Model 243666 PrecisionFlo Control V alve Stainless steel wetted parts Ref. No. Part No. Description Qty . 1 626702 HOUSING, air cylinder 1 2 ...

  • Graco 243482 - page 18

    18 308876 Parts 8372A 8370A 63 46 48 49 51 52 58 59 57 50 (965768 only) (965767 only) 47 8375B 61 60 53 54 55 56 ...

  • Graco 243482 - page 19

    19 308876 Service (Models 243482 and 243666 only) W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. SKIN INJECTION HAZARD Disassembly 1. Relieve all air and fluid pressure . 2. Disconnect the valve from the system. 3. Remove the four nosepiece screw ...

  • Graco 243482 - page 20

    20 308876 Service (Models 243482 and 243666 only) Reassembly Air Cylinder Section 1. Lubricate the shaft o-rings (4) and the bearings (5) with grease supplied in the repair kit. Insert o-rings into the air cylinder (1) and air cap (1 1) cavities. See Fig. 5. 2. Press the bearings (5) flush into the air cylinder housing and air cap, trapping the o-r ...

  • Graco 243482 - page 21

    21 308876 Parts (Models 243482 and 243666 only) 29 10 16 6 5 3 4 28, 29 20 21 22 39 23 40 15 38 25 27 Fig. 6 1 26 19 18 12 30 T ighten oppositely and evenly to 40–45 in-lbs (4.5–5 N S m). Lubricate with grease supplied in the repair kit. Tighten to 15–20 in lbs (17–22 N S m) Apply Loctite Primer N7649 and Loctite TL242, 243, or equivalent ( ...

  • Graco 243482 - page 22

    22 308876 Parts (Models 243482 and 243666 only) 8371A 1 19 18 26 30 12 9 10 16 19 7 6 5 3 4 28, 29 20 21 22 39 41 23 40 31 38 25 27 45 15 31 Model 243482 40 ...

  • Graco 243482 - page 23

    23 308876 Parts Model 965767 Hand Held V alve with Pneumatic T rigger Aluminum wetted parts See page 16 for illustration of items 1–44. See page 18 for illustration of items 46–62. Ref. No. Part No. Description Qty . 1 626702 HOUSING, air cylinder 1 3 626068 SHAFT , air cylinder 1 4* 156454 O-RING, 010 buna-n 2 5* 551 181 BEARING, air cylinder ...

  • Graco 243482 - page 24

    24 308876 Parts Model 965768 Hand Held V alve with Electric Switch Aluminum wetted parts See page 16 for illustration of items 1–44. See page 18 for illustration of items 53–63. Ref. No. Part No. Description Qty . 1 626702 HOUSING, air cylinder 1 3 626068 SHAFT , air cylinder 1 4* 156454 O-RING, 010 buna-n 2 5* 551 181 BEARING, air cylinder 2 6 ...

  • Graco 243482 - page 25

    25 308876 Accessories Plastic T ube Fittings to Connect Air Signals T ube OD 1/8 NPT (M) Straight 1/8 NPT (M) 90º Swivel T ube T ee 1/8 in. 5/32 in. 1/4 in. 598329 104172 513826 598140 597151 551203 514435 1111 6 7 T ube OD 1/4 NPT (M) Straight 1/4 NPT (M) 90º Swivel 5/32 in. 1/4 in. 598252 104165 598327 C19391 Plastic T ubing for Air Signal Line ...

  • Graco 243482 - page 26

    26 308876 Accessories Fluid Nozzles Zinc-plated steel nozzles, 1/8 npt* Part No. Orifice Length 607665 0.125 in. (3.17 mm) 2 in. (51 mm) 161505 0.09 in. (2.28 mm) 2 in. (51 mm) 164799 0.055 in. (1.39 mm) 2-1/8 in. (54 mm) * Requires a 1/8 npt(f) bushing. Order 168683 Nozzle Bushing. 8462A Nozzles for use with 188253 flange nut. Part No. Orifice Len ...

  • Graco 243482 - page 27

    27 308876 T echnical Data Category Data Maximum Fluid Pressure 4000 psi (28 MPa, 276 bar) Maximum Cylinder Air Pressure 120 psi (0.84 MPa, 8.4 bar) Air inlets (open and close ports) 1/8 npt(f) Fluid Inlet 1/4 npt(f) Fluid Outlet 1/4 npt(f) and 3/4–16 unf(m) Fluid Viscosity Range 20 cps to 1 million cps Snuffer Action Fluid Section Isolation chamb ...

  • Graco 243482 - page 28

    28 308876 Dimensions 6.13 in. (155.7 mm) 8370A 1.75 in. (44.45 mm) 2.25 in. (57.15 mm) Direct Mount Solenoid (optional) 2.25 in. (57.15 mm) 0.88 in. (22.35 mm) 1.75 in. (44.45 mm) 1.42 in. (36.07 mm) 3.5 in. (88.9 mm) 1.63 in. (41.4 mm) 5 in. (127 mm) ...

  • Graco 243482 - page 29

    29 308876 Notes ...

  • Graco 243482 - page 30

    30 308876 Graco Standard W arranty Graco w arrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco w ill, for a period of twelve months from th ...

Fabricante Graco Categoría Glue Gun

Los documentos del dispositivo Graco 243482 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Graco
- manuales de instrucciones 243482
- hojas de producto Graco
- folletos informativos
- o etiquetas energéticas Graco 243482
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Graco 243482.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Graco 243482, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Graco 243482. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Graco 243482.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Graco 243482, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Graco 243482. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Graco 243482.

El manual de instrucciones completo de Graco debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Graco 243482 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Graco 243482, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Graco 243482 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Graco 243482 - que deben facilitarnos los primeros pasos durante el uso de Graco 243482
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Graco 243482
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Graco 243482 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Graco 243482?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Graco 243482, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Graco 243482 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)