Español dropdown-ico

Manual de instrucciones HP (Hewlett-Packard) 72H3482

41 de páginas 0.11 mb
Descargar

Pasar a la página of 41

Summary
  • HP (Hewlett-Packard) 72H3482 - page 1

    T urbo16/4 T oken Ring Network ISA Adapter 72H3482 Installation Guide ...

  • HP (Hewlett-Packard) 72H3482 - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incid ...

  • HP (Hewlett-Packard) 72H3482 - page 3

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK.DOS Size: 18KB Date: 6/13/96] • Microsoft Windows for Workgroups 3.11 m ...

  • HP (Hewlett-Packard) 72H3482 - page 4

    1 Connecting to a Netware 3.12 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted. 11 When you have received notification that the installation has comple ...

  • HP (Hewlett-Packard) 72H3482 - page 5

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLi ...

  • HP (Hewlett-Packard) 72H3482 - page 6

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. a Click ...

  • HP (Hewlett-Packard) 72H3482 - page 7

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.” 17 Set the path to your Windows 95 files and cli ...

  • HP (Hewlett-Packard) 72H3482 - page 8

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 ...

  • HP (Hewlett-Packard) 72H3482 - page 9

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK.DOS Size: 18KB Date: 6/13/96 • Microsoft Windows for Workgroups 3.11 me ...

  • HP (Hewlett-Packard) 72H3482 - page 10

    2 Connecting to a Netware 4.11 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted. 11 When you have received notification that the installation has comple ...

  • HP (Hewlett-Packard) 72H3482 - page 11

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and NWLin ...

  • HP (Hewlett-Packard) 72H3482 - page 12

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure. If you are using a Vectra VL8, go directly to step 9. a Click on ...

  • HP (Hewlett-Packard) 72H3482 - page 13

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.” 17 Set the path to your Windows 95 files and cli ...

  • HP (Hewlett-Packard) 72H3482 - page 14

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 ...

  • HP (Hewlett-Packard) 72H3482 - page 15

    3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Workgroups Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK5.386 Size: 46K Date: 9/28/96 • Microsoft Windows for Workgroups 3.11 ...

  • HP (Hewlett-Packard) 72H3482 - page 16

    3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon. 8 Se ...

  • HP (Hewlett-Packard) 72H3482 - page 17

    3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 12 Select “IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2 only” and click on “OK.” 13 Accept the default “Network Drivers” and click on “Close.” ❒ IBM Token-Ring ISA Adapter, NDIS2 only [NDIS2] ❒ Microsoft NetBEUI ❒ IPX/SPX Compatible Transport with NetBIOS 14 At th ...

  • HP (Hewlett-Packard) 72H3482 - page 18

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/ SPX ...

  • HP (Hewlett-Packard) 72H3482 - page 19

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 When Windows 95 has loaded, click on “Start” then “Settings” and open the “Control Panel.” 11 Double-Click the “Network” icon and click on “Add.” 12 Select to add an “Adapter”, click on “Add” and then click on “Have Disk.” 13 In the “Install From Disk” wi ...

  • HP (Hewlett-Packard) 72H3482 - page 20

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 Windows NT Workstation Version3.51 Requirements • HP Vectra with Windows NT Workstation 3.51 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 3.51 media. • Micr ...

  • HP (Hewlett-Packard) 72H3482 - page 21

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 10 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer. 11 Insert the Windows NT Workstation CD. 12 In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button. (If you have an ...

  • HP (Hewlett-Packard) 72H3482 - page 22

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.) 26 To complete the installation, remove the floppy disk , ...

  • HP (Hewlett-Packard) 72H3482 - page 23

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 ...

  • HP (Hewlett-Packard) 72H3482 - page 24

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra VL8 with Windows NT Workstation 4.0 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 3.51/4.0 media. ? ...

  • HP (Hewlett-Packard) 72H3482 - page 25

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 10 In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”. 11 Click on “Select from list” and click on “Have Disk” and set path to “A:NT” (If you have a preloaded HDD, set path to “C:MastersLanDr ...

  • HP (Hewlett-Packard) 72H3482 - page 26

    4 Connecting to a Windows NT 4.0 Server Windows for Workgroups 4 Connecting to a Windows NT 4.0 Server Windows for Workgroups Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.386 Size: 46K Date: 9/28/96 • Microsoft Windows for Workgroups 3.11 med ...

  • HP (Hewlett-Packard) 72H3482 - page 27

    4 Connecting to a Windows NT 4.0 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon. 8 Sel ...

  • HP (Hewlett-Packard) 72H3482 - page 28

    4 Connecting to a Windows NT 4.0 Server Windows for Workgroups on “OK.” 13 Accept the default “Network Drivers” and click on “Close.” • IBM Token-Ring ISA Adapter, NDIS2 only [NDIS2] • Microsoft NetBEUI • IPX/SPX Compatible Transport with NetBIOS 14 At the “Network Setup” dialog box, click “OK.” 15 Set your User Name, Work ...

  • HP (Hewlett-Packard) 72H3482 - page 29

    4 Connecting to a Windows NT 4.0 Server Windows for Workgroups ...

  • HP (Hewlett-Packard) 72H3482 - page 30

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Microsoft Windows NT 4.0 server that supports Net BEUI, NWLink IPX/ SPX, ...

  • HP (Hewlett-Packard) 72H3482 - page 31

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. a Clic ...

  • HP (Hewlett-Packard) 72H3482 - page 32

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.” 17 Set the path to your Windows 95 files and c ...

  • HP (Hewlett-Packard) 72H3482 - page 33

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 Windows NT Workstation Version3.51 Requirements • HP Vectra VL8 with Windows NT Workstation 3.51 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 3.51 media. • M ...

  • HP (Hewlett-Packard) 72H3482 - page 34

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 10 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer. 11 Insert the Windows NT Workstation CD. 12 In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button. (If you have an ...

  • HP (Hewlett-Packard) 72H3482 - page 35

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.) 26 To complete the installation, remove the floppy disk , ...

  • HP (Hewlett-Packard) 72H3482 - page 36

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra VL8 with Windows NT Workstation 4.0 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 4.0 media. • Mic ...

  • HP (Hewlett-Packard) 72H3482 - page 37

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 10 In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”. 11 Click on “Select from list” and click on “Have Disk” and set path to “A:NT” (If you have a preloaded HDD, set path to “C:MastersLanDrv ...

  • HP (Hewlett-Packard) 72H3482 - page 38

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.) 27 To complete the installation, remove the floppy disk, a ...

  • HP (Hewlett-Packard) 72H3482 - page 39

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 ...

  • HP (Hewlett-Packard) 72H3482 - page 40

    ...

  • HP (Hewlett-Packard) 72H3482 - page 41

    V ersion Number IBM T urbo 16/4 Rev .1 ...

Fabricante HP (Hewlett-Packard) Categoría Network Cables

Los documentos del dispositivo HP (Hewlett-Packard) 72H3482 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos HP (Hewlett-Packard)
- manuales de instrucciones 72H3482
- hojas de producto HP (Hewlett-Packard)
- folletos informativos
- o etiquetas energéticas HP (Hewlett-Packard) 72H3482
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones HP (Hewlett-Packard) 72H3482.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje HP (Hewlett-Packard) 72H3482, instrucciones de servicio, instrucciones cortas o instrucciones de usuario HP (Hewlett-Packard) 72H3482. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto HP (Hewlett-Packard) 72H3482.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo HP (Hewlett-Packard) 72H3482, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar HP (Hewlett-Packard) 72H3482. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de HP (Hewlett-Packard) 72H3482.

El manual de instrucciones completo de HP (Hewlett-Packard) debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual HP (Hewlett-Packard) 72H3482 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice HP (Hewlett-Packard) 72H3482, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de HP (Hewlett-Packard) 72H3482 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo HP (Hewlett-Packard) 72H3482 - que deben facilitarnos los primeros pasos durante el uso de HP (Hewlett-Packard) 72H3482
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con HP (Hewlett-Packard) 72H3482
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de HP (Hewlett-Packard) 72H3482 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de HP (Hewlett-Packard) 72H3482?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con HP (Hewlett-Packard) 72H3482, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con HP (Hewlett-Packard) 72H3482 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)