-
Polycom XS-3900 - page 1
June 2008 Edition 1725-36061-001 Version C VIEW Certified Configuration Guide Xirrus Wi-Fi Array XS-3500/3700/3900 ...
-
Polycom XS-3900 - page 2
Configuration Guide 2 PN: 1725-36061-001_C.doc Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries. All ot her trademarks used herein are the propert y of their respective owners. Patent Info ...
-
Polycom XS-3900 - page 3
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and Xirrus Wi-Fi Array infrastructure products. The products listed below have been ...
-
Polycom XS-3900 - page 4
Configuration Guide 4 PN: 1725-36061-001_C.doc Known Limitations Voice quality may be impaired in an environment with heavy wireless TCP traffic, such as FTP data transfers. Access Point Capacity and Positioning Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony white paper. This document covers the security, coverage, capacity ...
-
Polycom XS-3900 - page 5
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 5 Network Topology The following topology was used for VIEW Certification testing. ...
-
Polycom XS-3900 - page 6
Configuration Guide 6 PN: 1725-36061-001_C.doc Configuration Settings Xirrus Arrays initially boot with all radios disabled except for the monitor radio. The monitor radio may be left enabled and in no way interferes with the SpectraLink Wireless Telephones; however it was disabled for the certification process for simplicity. Disabling the monitor ...
-
Polycom XS-3900 - page 7
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 7 The monitor radio may also be disabled with the Web Management Interface (WMI) as shown below. 1. In the navigation pane, click IAP Settings . 2. In the IAP Settings screen, clear the Enabled check box for IAP abg2 . 3. Click the Apply button. Figure 1: Disabling the Monitor Radio ...
-
Polycom XS-3900 - page 8
Configuration Guide 8 PN: 1725-36061-001_C.doc Setting Radio Channels With the SpectraLink Wireless Teleph ones operating in 802.11b mode, at least one of the Wireless LAN Array’s Integrated Access Points (IAPs) must be set to the 2.4 GHz band. Any of th e Array’s four abg radios may be used, and up to three may be used simultaneously. However, ...
-
Polycom XS-3900 - page 9
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 9 Configuring an SSID An SSID for the phones must be set on the Array. The following CLI commands show how to implement an SSID called ‘spec’. Xirrus_WLAN _Array(con fig)# ssid Xirrus_WLAN _Array(con fig-ssid)# add spec Xirrus_WLAN _Array(con fig-ssid-spe c)# broadcast on Xirrus_WL ...
-
Polycom XS-3900 - page 10
Configuration Guide 10 PN: 1725-36061-001_C.doc This screen shows how to set up the SSID in the WMI. 1. In the navigation pane, click SSID Managemen t . 2. Type the name in the New SSID Name : field near the top of the SSID Managemen t screen. 3. Click the Create button in the upper right corner of the screen. 4. The name appears in the SSID list t ...
-
Polycom XS-3900 - page 11
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 11 Setting Radio Cell Size The radio transmit powers and receive sensitivities should be set appropriately for the environment in which they are operating. The simplest way to do this is to pick an operating cell size for them. The following CLI commands illustrate how to set a small c ...
-
Polycom XS-3900 - page 12
Configuration Guide 12 PN: 1725-36061-001_C.doc This screen shows how to set the cell size and en able the radios via the IAP Settings page of the WMI. 1. In the navigation pane, click IAP Settings . 2. In the IAP Settings page, click the Enabled check box for each radio you wish to enable. 3. In the Cell Size column, select the desired cell size f ...
-
Polycom XS-3900 - page 13
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 13 Security Enabling WPA-PSK For WPA-PSK mode, the global encryp tion cipher method must be set to TKIP with the following CLI commands: Xirrus_WLAN _Array(con fig)# security Xirrus_WLAN _Array(con fig-security )# wpa tkip on Xirrus_WLAN _Array(con fig-security )# wpa ae s off Xirrus_W ...
-
Polycom XS-3900 - page 14
Configuration Guide 14 PN: 1725-36061-001_C.doc This screen shows how the global encryption cipher can be set through the WMI. 1. In the navigation pane, click Global Set tings . 2. In the Global Settings screen, click the Yes option on the TKIP Enabled line. 3. Click the Apply button to save the settings. Figure 4: Global WPA Settings ...
-
Polycom XS-3900 - page 15
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 15 Setting the Pre-Shared Key The pre-shared key must be provided next. In the example below the passphrase is set to ‘11111111’ . The passphrase is an at tribute of the SSID and is set with the following CLI commands: Xirrus_WLAN _Array(con fig)# ssid Xirrus_WLAN _Array(con fig-ss ...
-
Polycom XS-3900 - page 16
Configuration Guide 16 PN: 1725-36061-001_C.doc This screen shows how to set the encryption and passphras e in the SSID Management page of the WMI. 1. In the navigation pane, click SSID Managemen t . 2. Select the correct SSID from the lis t at the center top of the page. 3. On the Security Type line, select WPA from the drop-down list. 4. On the S ...
-
Polycom XS-3900 - page 17
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 1 7 Enabling WPA2-PSK If WPA2-PSK mode is desired then the global encryption cipher method should be set to AES with the following CLI commands: Xirrus_WLAN _Array(con fig)# security Xirrus_WLAN _Array(con fig-security )# wpa ae s on Xirrus_WLAN _Array(con fig-security )# wpa tkip off ...
-
Polycom XS-3900 - page 18
Configuration Guide 18 PN: 1725-36061-001_C.doc Now provide the pre-shared key (‘11111111’ in t his example): Xirrus_WLAN _Array(con fig)# security Xirrus_WLAN _Array(con fig)# ssid Xirrus_WLAN _Array(con fig-ssid)# edit spec Xirrus_WLAN _Array(con fig-ssid-spe c)# encryption wpa2 ss id_specific Xirrus_WLAN _Array(con fig-ssid-spe c)# passphras ...
-
Polycom XS-3900 - page 19
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 19 The global encryption cipher for WPA2-PSK can also be set through the WMI as illustrated in Figure 4 Global WPA Settings . The difference between the WPA-PSK and WPA2-PSK settings is that, for WPA2- PSK, No should be selected on the TKIP Enabled line, and Yes should be selected on t ...
¿Tienes una pregunta acerca de Polycom XS-3900?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Polycom XS-3900, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Polycom XS-3900 probablemente compartirá una forma de solucionarlo.