-
Cables to Go AVS815 - page 1
CABLE SENDER ( POWE R se nder TV AVS815) ...
-
Cables to Go AVS815 - page 2
20 Thank you very much. Y ou have acquired an electronic system of a very high technical standard. With the TV A VS 815 Power T ransmitter you can transmit colour images with stereo sound through walls and ceilings. The greatest possible care is necessary for bringing it into operations, and that means studying every point in these operating instru ...
-
Cables to Go AVS815 - page 3
21 Contents Page 1. Safety instructions 22 2. General description 22 3. T ransmissions 23 4. The A VS 850 Power T ransmitter 24 5. The A VS 840 Power T ransmitter 26 6. The RC 815 infra-red remote control for the cable tuner 28 7. Bringing into operation 29 7.1 Connecting the A VS 850 29 7.2 Connecting the A VS 840 30 7.3 Adjusting the cable tuner ...
-
Cables to Go AVS815 - page 4
1. Safety instructions 2. General description 22 Correct and proper use The TV A VS 815 Power T ransmitter is designed for use in dry , indoor rooms. The power supply is provided by the mains adapter enclosed with the T ransmitter . Please only ever use this mains adapter . It is not allowed to alter or modify any part of the system. The unit is re ...
-
Cables to Go AVS815 - page 5
3. T ransmissions 23 If you use the infra-red remote control of another piece of video equipment, these infra-red signals will be passed on via the RX 579 infra- red module to the relevant appliance, such as a satellite-receiver , the audio and video signals of which are being transmitted. In order to allow this equipment, e.g. the satellite receiv ...
-
Cables to Go AVS815 - page 6
4. The A VS 850 Power T ransmitter 24 Items included 1 Power Sender A VS 850 Power T ransmitter 1 12 V plug-in mains adapter 1 RX 579 infra-red module 1 Cinch/Scart connecting cable 1 co-axial branch plug 1 co-axial cable 1 co-axial infra-red remote-control unit for cable tuner 1 aerial adapter Control elements 1,433 MHz aerial Receives the 433 MHz ...
-
Cables to Go AVS815 - page 7
25 3. Channel switch The channels can either be selected one behind the other (1,2,3,4,1,2, etc., or the other way round) or set by means of the enclosed infra-red remote-control unit (using the keys TXA ... TXD – see Point 5). 4. TV channel selection switch The TV channels can be selected with this switch. 5. Mode switch It is possible to switch ...
-
Cables to Go AVS815 - page 8
5. A VS 840 Power Receiver 26 Items included: 1 Power A VS 840 Power Receiver 1 9 V plug-in mains adapter 1 Cinch/scart connecting cable Control elements 1. A/V Cinch output sockets 1 video, 2 audio output sockets. These take the received signal and feed it into the receiving unit via the appropriate adapter cable. With adapter cables (2 cinch / sc ...
-
Cables to Go AVS815 - page 9
27 4. Channel and switch settings. The A VS 840 Power Receiver can be operated in one of two ways: 1. Permanent reception of a given wireless channel (cable TV or video). 2. Switching between the pre-set wireless channels at pre- determined intervals. This function is necessary when, for instance, the Power Receiver is to be used with a number of d ...
-
Cables to Go AVS815 - page 10
6. The infra-red remote-control unit for the cable tuner 28 General Y ou need the RC 815 remote-control unit in order to be able to control the cable tuner integrated into the A VS 850 Power T ransmitter . The basic code "0000” is set on the remote-control unit when it is delivered. This code can be changed, e.g. if two parties in one buildi ...
-
Cables to Go AVS815 - page 11
7. Bringing into operation 29 1. Insert the cable branch plug "A” into the TV cable socket. 2. Insert the adapter "B” into the aerial socket of the A VS 850. 3. Connect the cable branch plug "A” and the aerial input "B” of the A VS 850 with the enclosed co-axial cable "C”, using the adapter "B”. 4. Connect ...
-
Cables to Go AVS815 - page 12
7. Starting up 30 carries the video signal and must be inserted into the "video” socket, the red one goes into "audio right”, and the white one into "audio left”. 3. Set one of the channels 1 to 4 at the channel switch. Note. If the A VS 850 Power T ransmitter and the A VS 840 Power Receiver are to work together , they have to ...
-
Cables to Go AVS815 - page 13
31 Connecting the Power Receiver to a television set with a video recorder If you would like to feed the A V signal into a video recorder , connect the A VS 840 Power Receiver to the A V or scart input sockets on the video recorder . Y ou can then record the programme that is being received and/or watch television at the same time. ...
-
Cables to Go AVS815 - page 14
7. Starting up 32 7.3 Settings on the cable tuner The settings on the cable tuner are made with the RC 815 infra-red remote-control unit from the place where the A VS 840 Power Receiver is set up. Note: the TV A VS 815 Power T ransmitter has two separate television programme memories, one for TV channels and the other for cable TV channels. Y ou ha ...
-
Cables to Go AVS815 - page 15
33 5. Press the "SET” button. 6. Switch on the television set connected to the A VS 840 Power Receiver and select the A V input. Y ou will see the lettering "RF ID XXX" (XXX represents the code currently set on the RC 815 remote-control unit). 7. Disconnect the mains adapter of the A VS 850 from the wall socket for a moment and the ...
-
Cables to Go AVS815 - page 16
8. Operating possibilities 34 Fine-tuning the TV A VS 815 Power T ransmitter The A VS 850 power transmitter is able to transmit A V signals over a distance of up to 300 metres (line of sight). Any wall or concrete ceiling will represent a slight obstacle, and will thus reduce the transmission range of the system. Parallel operation of a number of A ...
-
Cables to Go AVS815 - page 17
35 Extension possibilities with the TV A VS 815 Power T ransmitter An A VS 815 Power T ransmitter TV Set can be extended with a number of A VS 840 Power Receivers. Example: 1 Power T ransmitter to 3 Power Receivers 1 2 3 4 5 6 on AVS 840 Power Receiver CH T 1 2 3 4 5 6 on AVS 840 Power Receiver CH T 1 2 3 4 5 6 on AVS 840 Power Receiver CH T RC 815 ...
-
Cables to Go AVS815 - page 18
9. Rectifying a malfunction 36 Poor transmission quality 1. Reflections of the signal can sometimes affect the transmission quality . Move the Power T ransmitter or Receiver away just a few inches and this should solve the problem. 2. Change the channel settings (1 to 4) on the Power T ransmitter and the Power Receiver . No transmission 1. Is the s ...
-
Cables to Go AVS815 - page 19
10. T echnical data 37 Power T ransmitter TV Set A VS 815 Power T ransmitter A VS 850 Operating voltage: Mains adapter 12 V DC T ransmitter: 4 Channel Channel 1 (TXA): 2.414 GHz Channel 2 (TXB): 2.432 GHz Channel 3 (TXC): 2.450 GHz Channel 4 (TXD): 2.468 GHz T ransmitter output: 10 mW Range: up to 300 metres line-of-sight Receiver: 433.92 MHz Cable ...
¿Tienes una pregunta acerca de Cables to Go AVS815?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Cables to Go AVS815, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Cables to Go AVS815 probablemente compartirá una forma de solucionarlo.