-
Jura Capresso E75 - page 1
IMPRESSA E70/75 Instructions for use 2/02 Art. Nr. 62564 ...
-
Jura Capresso E75 - page 2
Jura Impressa E70/75 English ................................................................................................................ 6 – 19 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld ...
-
Jura Capresso E75 - page 3
Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 ...
-
Jura Capresso E75 - page 4
7 8 9 11 12 13 14 15 16 17 18 6 5 4 3 2 1 10 8 8b 8a Operating elements Jura Impressa E70/75 1 Water quantity switch 2 Powder coffee selection switch 3 Coffee key for 2 cups 4 Rinsing-, cleaning-, descaling key 5 Coffee key for 1 cup 6 ON/OFF switch 7 Display dialogue system 8 Key P 8a Key 8b Key 9 Water tank with carrying handle 10 Height- ...
-
Jura Capresso E75 - page 5
5 Contents Jura Impressa E70/75 1. Description .................................................. page 6 2. Safety instructions ........................................ page 6 2.1 Warnings .............................................. page 6 2.2 Safety precautions .................................. page 6 3. Preparation of the machine ............ ...
-
Jura Capresso E75 - page 6
6 Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine for the first time and keep them in safe place for easy reference in future. Should you require further information or should particular prob- lems occur that are not dealt with in sufficient detail ...
-
Jura Capresso E75 - page 7
7 3. Preparation of the machine 3.1 Checking the mains voltage The machine is set to the correct voltage before leaving our factory. Ensure that your mains voltage corresponds to the details quoted on the rating plate attached to the bottom of the machine. 3.2 Checking the fuse The machine is designed for a current of 10 Amps. Check that the fuse u ...
-
Jura Capresso E75 - page 8
8 The symbols on the display mean: HARDNESS LEVEL — Water hardness function switched off HARDNESS German water hardness 1 – 7° LEVEL 1 French water hardness 1.79 – 12.53° HARDNESS German water hardness 8 – 15° LEVEL 2 French water hardness 14.32 – 26.85° HARDNESS German water hardness 16 – 23° LEVEL 3 French water hardness 28.64 ? ...
-
Jura Capresso E75 - page 9
9 6. Adjusting the water quantity The water quantity can be infinitely adjusted with rotary knob (1). The small key means little water for espresso, the large cup means a lot of water for coffee. SELECT PRODUCT Turn the water quantity rotary knob into the position at which the required amount of water appears on the display: 1 30 ML – 90 ...
-
Jura Capresso E75 - page 10
10 Never use water-soluble instant coffee or quick coffee. We recommend that you only use powder from freshly ground coffee beans or pre-ground, vacuum-packed coffee. Never put more than 2 portions of coffee in. The filler funnel is not a storage container. Make sure that the coffee powder which you use is not ground too finely. This can lead to bl ...
-
Jura Capresso E75 - page 11
11 When you have reached the required quantity of hot water, turn the steam/hot water rotary knob (15) back to the position . SELECT PRODUCT At the start of a water draw-off, there can be splashes. The pivoting nozzle gets hot. Please avoid direct contact with the skin. 10. Switching machine off When the machine is switched off, the rinsing ...
-
Jura Capresso E75 - page 12
12 12.4 Fill beans FILL BEANS Fill beans as described in Chapter 3.4. The display FILL BEANS only goes off after coffee has been drawn off. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch the machine off for this purpose. 12.5 Clean unit CLEAN UNIT After 200 draw-offs or 160 ri ...
-
Jura Capresso E75 - page 13
13 12.8 Insert filter Pull up the cartridge holder. Pressing gently, put the filter cartridge into the water tank (Fig. 7). Close the cartridge holder until it engages audibly. Fill the water tank with cold fresh tap water and put it back into the machine. Switch the machine on with the ON/OFF switch. Press the key P until you h ...
-
Jura Capresso E75 - page 14
14 12.10 General cleaning instructions Never use abrasive articles or corrosive chemicals to clean your machine. Wipe down the casing on the inside and out using a soft, damp cloth. Clean the pivoting nozzle after each use. After heating milk, draw off a little hot water in order to clean the inside of the pivoting nozzle. You c ...
-
Jura Capresso E75 - page 15
15 ADD TABLET (Fig. 9) / PRESS RINSE UNIT CLEANING / PLEASE WAIT An acoustic signal can be heard. EMPTY TRAY Wait for about 10 seconds before you put the drip tray back in again. PRESS RINSE UNIT CLEANING / PLEASE WAIT An acoustic signal can be heard. EMPTY TRAY SELECT PRODUCT After each cleaning operation the fi ...
-
Jura Capresso E75 - page 16
16 FILL WATER / OPEN TAP / PRESS RINSE Turn the selector switch for coffee or hot water / steam (13) to position and press the rinsing key . UNIT DECALCING / PLEASE WAIT An acoustic signal is heard. EMPTY TRAY CLOSE TAP UNIT DECALCING / PLEASE WAIT The water is guided into the drip tray in the interior of the machine ...
-
Jura Capresso E75 - page 17
17 17. Messages Cause Action SYSTEM EMPTY System empty Fill system (see point 4.1) FILL WATER The tank is empty Fill with water Floater defective Rinse out or descale water tank FILL BEANS The bean container is empty Fill up with beans Although beans have been poured in, Draw off a cup of coffee. the display remains on ”FILL BEANS” only goes of ...
-
Jura Capresso E75 - page 18
18 18. Problems Problem Cause Action Grinder is very noisy – foreign body in grinder – Drawing off coffee with pre-ground powder – is still possible – Have machine examined by Jura service centre Not enough froth when – milk not suitable – use full-cream milk frothing milk – frothing aid blocked – clean frothing aid – frothing aid ...
-
Jura Capresso E75 - page 19
19 20. Technical data Voltage: 230V AC Power consumption: 1350 W Fuse: 10 A Safety check: Energy consumption standby: approx. 3 Wh Energy consumption ready to make coffee: approx.17 Wh Pump pressure: max. 15 bar Water tank: 1.9 litres Capacity, bean container: 200 gr. Capacity, grounds container: max. 16 port. Cable length: approx. 1,1 m Weight: 8, ...
¿Tienes una pregunta acerca de Jura Capresso E75?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Jura Capresso E75, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Jura Capresso E75 probablemente compartirá una forma de solucionarlo.