-
EnGenius EOC-2610 - page 1
Wireless Out door Access Point & Client Br i dge User ’ s Manual V ersion: 1.0 ...
-
EnGenius EOC-2610 - page 2
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 2 T able of Content s 1 INTRODUCTION ................... ................... ................... ....................... ................... ................ .5 1.1 F EATURES ................ ...................... ................... ....................... ................... ........ ...
-
EnGenius EOC-2610 - page 3
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 3 5.3.2 IP S ETTING S ............... ....................... ................... ................... ....................... ............... 31 5.3.3 S PANNING T REE S ETTINGS .......... ...................... ................... ................... ....................... 32 5.4 W IRE ...
-
EnGenius EOC-2610 - page 4
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 4 Revision History V ersion Date Notes 1.0 August 24, 2008 Initial V ersion ...
-
EnGenius EOC-2610 - page 5
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 5 1 Introduction EOC-2610 is a long range out door wireless Access Point and Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum. It features high tran smitted output power and high receivable sensitivity . High output power and high sensit ivity can extend range and ...
-
EnGenius EOC-2610 - page 6
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 6 • 802.1x IEEE 802 .1x Authenticator • MAC address functions MAC address filter (AP mode) • L2 isolation • Station isolation Management • Firmware Upgrade Upgrading firmw are via w eb browser , setting are re served af ter upgrade • Rese t & Bac kup Reset to facto ry de ...
-
EnGenius EOC-2610 - page 7
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 7 h PC/AT compatible computer with an E thernet interface. h Operating system that supports H TTP web-browser 1.5 Applications The wireless LA N products are easy to install and highly ef ficient. The f ollowing list describes some of the many applications made possible through the powe ...
-
EnGenius EOC-2610 - page 8
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 8 This is the simples t network config uration with several compu ters equipped with the PC Cards that form a wireless network whenever they are within range of one another. In ad-hoc mode, each client is peer-to- peer, would only have access to the resourc es of the other client an d d ...
-
EnGenius EOC-2610 - page 9
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 9 2 Understanding the Hardware 2.1 Hardware Installation 1. Place the unit in an appropriate loc ation after conducting a site survey. 2. Plug one end of the Ethernet cable into the Network port of the PoE injector and another end into your PC/Notebook. 3. P lug one end of another Ether ...
-
EnGenius EOC-2610 - page 10
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 10 2.3 Moun ting Kit s The images below depict the st andard and optional mounting kit s. 2.4 IP Address Configuration This device can be configured as a Bridge/Router or Acc ess Point. The default IP address of the device is 192.168.1.1 In order to log into this de vice, you must first ...
-
EnGenius EOC-2610 - page 11
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 11 2. Select Internet Protoc ol (TCP/IP) and then click on the Properties bu tton. This will allow you to configure the TCP/ IP settings of your PC/Notebook. 3. Select Use the following IP Address radio button and then enter the IP address and subnet mask. Ensure that the IP address and ...
-
EnGenius EOC-2610 - page 12
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 12 3 Switching Between Operating Modes This device ca n operate in three modes: Acce ss Point, Clie nt t Bridge, an d Client Router. This chapter will describe how to switch between operating modes. 3.1 Logging In To configure the device through the web-browser, enter the IP ad dres ...
-
EnGenius EOC-2610 - page 13
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 13 4 Access Point Operating Mode Logging In To configure the device through the web-browser, enter the IP ad dress of the device (def ault : 192.168.1.1 ) into the add ress bar of the web-browser and pr ess Ent er . Make sure that the device and your c omputers are configured on ...
-
EnGenius EOC-2610 - page 14
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 14 Status Click on the Sta tus link on the navigation drop- down menu. You will then see three options: Main, Wireless Client List, and System Log. Each option is described in detail below . Main Click on the Main link under the Status dro p-dow n men u. The stat us that is disp ...
-
EnGenius EOC-2610 - page 15
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 15 Wireless Client List Cli ck on t he Wireless Clie nt List link under the Sta tus drop-down menu. This page displays the list of Clients that are associated to the A ccess Point. The MAC addresses and signal strength for each client is display ed. Click on the Refresh button t ...
-
EnGenius EOC-2610 - page 16
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 16 System Click on the System link on the navigation drop-down menu. You will then se e three options: System Properties, IP Settings, and Spanning Tree Settings . Each option is described in detail below. System Properties Cli ck on t he System Pro perties link under the System ...
-
EnGenius EOC-2610 - page 17
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 17 Point to pass IP addresses to the clients associated with it. You may select Specify an IP Address radio button if you would like the device to use a static IP address. In this case, you would be required to specify an IP address, subnet mask, and default gatew ay IP addr ess. IP ...
-
EnGenius EOC-2610 - page 18
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 18 Wireless Click on the Wireless link on th e navigation drop-down menu. You will then see four options: wireless ne twork, wireless MAC filter, WDS link settings, and wireless advanced settings. Each option is described below. Wireless Network The Wireless Network page allows ...
-
EnGenius EOC-2610 - page 19
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 19 protocol that provides the same level of security for wireless networks as for a wired networ k. Authentication Type: Select an authentication method. Options available are Open Key , Shared Key or Aut o . An open system allows any client to authenticate as long as it conforms to ...
-
EnGenius EOC-2610 - page 20
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 20 Encryption : Select TKIP or AES fr om the drop-down list if your wireless network uses this encryption. WPA (Wi-Fi Protected A ccess) was designed to improve upon the security features of WEP (Wired Equivalent Privacy). The technology is designed to work with existing Wi-Fi produ ...
-
EnGenius EOC-2610 - page 21
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 21 Encryption : Select TKIP or AES fr om the drop-down list if your wireless network uses this encryption. RADIUS IP Address: Ent er the IP address of the RADI US server. RADIUS Port: Enter the port number of the RA DIUS server. The default is usually 1812 . RADIUS Secre ...
-
EnGenius EOC-2610 - page 22
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 22 in the List , only the address listed in the table will have access to the network; all other clients will be blocked. On the other hand, selected Deny MAC in the Lis t , only the listed MAC addresses will be blocked from accessing the network; all other clients will have access to t ...
-
EnGenius EOC-2610 - page 23
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 23 RTS Threshold : Packets over the specif ied size will use the RTS/CTS mechanism t o maintain performance in noisy networks and preventing hidden nodes from degrading the perform ance. Protection Mode : If your wireless network is using both 802.11b and 802.g devices then it i ...
-
EnGenius EOC-2610 - page 24
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 24 Management Click on the Manageme nt link on the navigation drop- down menu. You will t hen see seven options: administration, SN MP settings, backup/restore settings, firmware upgra de, time settings, and log. Each option i s described below. Administration Clic k on the Admi ...
-
EnGenius EOC-2610 - page 25
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 25 SNMP Enable / Disable : Ch oose to enable or disable the SNMP feature. Contact : Specify the contact details of the device. Location : Specify the location of the device. Read-Only Community Name : Specify the password for access the SNMP community for read only acces ...
-
EnGenius EOC-2610 - page 26
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 26 Restore saved settings from a file : Once a file has bee n backed up, you may restore it by clicking on the Browse button to select the file, and then the Restore button. Revert to factory default sett ings : Click on the Factory Default Settings button t o reset the device t ...
-
EnGenius EOC-2610 - page 27
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 27 Time Settings Click on the Time Settings link under the Manage ment menu. This page allows y ou to configure the time on the device. You may do this manually or by connecting to a NTP server. Manually Set Date and Time : Specify the dat e and time Automatically Get Date a ...
-
EnGenius EOC-2610 - page 28
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 28 5 Client Bridge Operating Mode 5.1 Logging I n To configure the device through the web-browser, enter the IP ad dress of the device (def ault : 192.168.1.1 ) into the add ress bar of the web-browser and pr ess Ent er . Make sure that the device and your c omputers are configu ...
-
EnGenius EOC-2610 - page 29
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 29 5.2 S tatus Click on the Stat us link on the navigation drop-down menu. You will then see three options: Main, Connection Status, and System Log. Each option is described in detail below. 5.2.1 Main Click on the Main link under the Status dro p-dow n men u. The stat us that i ...
-
EnGenius EOC-2610 - page 30
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 30 5.2.2 Connection Status Click on the Connection Status link under the Status drop-down menu. This page displays the current status of the network, including network ty pe, SSID, BSSID, connection status, wireless mode, current channel, security, data rate, noise level and s ignal ...
-
EnGenius EOC-2610 - page 31
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 31 5.3 System Click on the System link on the navigation drop-down menu. You will then se e three options: System Properties, IP Settings, and Spanning Tree Settings . Each option is described in detail below. 5.3.1 System Properties Cli ck on t he System Pro perties link under ...
-
EnGenius EOC-2610 - page 32
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 32 IP Network Sett ing : Select Obtain an IP address automatically (DHCP) radio button if the Access Point is conne cted to a DHCP server. This will allow the Access Point to pass IP addresses to the clients associated with it. You may select Specify an IP Address radio button if yo ...
-
EnGenius EOC-2610 - page 33
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 33 5.4 Wireless Click on the Wireless link on the navigation drop-down menu. You will then see three options: wireless network, wireless security, and wireless advanced settings. Each option is desc ribe d belo w. 5.4.1 Wireless Network The Wireless Network page allows y ou to c ...
-
EnGenius EOC-2610 - page 34
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 34 5.4.2 Wireless Security - WEP Security Mode : Sele ct WEP from the drop-down list if your wireless network uses WEP encryption. WEP is an acronym for Wired Equivalent Privacy, and is a security protocol that provides the same level of security for wireless networks as for a wired ...
-
EnGenius EOC-2610 - page 35
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 35 5.4.3 Wireless Security – WPA-PSK, WPA2-PSK, Security Mode : Se lect W PA-PSK, or WPA2-PSK from the drop-down list if your wireless network uses WPA pre-sh ared key. Encryption : Select TKIP or AES fr om the drop-down list if your wireless network uses this encryption. WPA ...
-
EnGenius EOC-2610 - page 36
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 36 Transmit Power : You may ha ve the different application distance of the device by selecting a value from the d rop-down list. This feature can be helpful in restricting the coverage area of the wireless network. You can arrange the different data r ate in distance in Access ...
-
EnGenius EOC-2610 - page 37
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 37 Name : Spec ify a us er name into the first field. Password : Specify a password into this field and then re-ty pe the password into the Confirm Password field. Click on the Apply button to save the changes. 5.5.2 SNMP Settings Click on the SNMP Settings link under th ...
-
EnGenius EOC-2610 - page 38
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 38 5.5.3 Backup/Restore settings, R eset to factory default settings Click on the Backup/Restore Setting link under the Ma nagement menu. This option is used to save the current settings of the device in a file on your local disk or load settings on to the device from a local disk. ...
-
EnGenius EOC-2610 - page 39
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 39 Click on the Brow se button and then select the appropriate firmware and then click on the Upgrade button. Note : The upgrade process may take about 1 minute to complete. Do not power off the device during this p rocess as it may cr ash the device and make it unusab le. The devic ...
-
EnGenius EOC-2610 - page 40
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 40 Syslog : Choose to enable or disable the syst em log. Log Server IP Address : Specify the IP address of the server that will receive the system log. Local Log : Choose to enable or disable the loc al log. Click on the Apply button to save the changes. ...
-
EnGenius EOC-2610 - page 41
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 41 6 Client Router Operating Mode 6.1 Logging I n To configure the device through the web-browser, enter the IP ad dress of the device (def ault : 192.168.1.1 ) into the add ress bar of the web-browser and pr ess Ent er . Make sure that the device and your c omputers are configu ...
-
EnGenius EOC-2610 - page 42
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 42 6.2 S tatus Click on the Stat us link on the navigation drop-down menu. You will then see three options: Main, Connection Status, and System Log. Each option is described in detail below. 6.2.1 Main Click on the Main link under the Status dro p-dow n men u. The stat us that i ...
-
EnGenius EOC-2610 - page 43
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 43 6.2.2 Connection Status Click on the Connection Status link under the Status drop-down menu. This page displays the current status of the network, including network ty pe, SSID, BSSID, connection status, wireless mode, current channel, security, data rate, noise level and s ignal ...
-
EnGenius EOC-2610 - page 44
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 44 6.3 System Click on the System link on the navigation drop-down menu. You will then see System Properties setting, which is described below . 6.3.1 System Properties Cli ck on t he System Pro perties link under the System dro p-d own me nu. Thi s pag e allows you to switch th ...
-
EnGenius EOC-2610 - page 45
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 45 6.4.1.1 WAN - DHCP The WAN interfac e can be configured as a DHCP Client in which the ISP provides the I P addr ess t o the dev ice. This is als o know n as Dy namic IP. Internet Connection Type : Select the DHCP from the drop-down list. Account Nam e : Specify an account ...
-
EnGenius EOC-2610 - page 46
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 46 6.4.1.2 WAN – Static IP The WAN interface can be configure d as Static IP address. In this ty pe of connection, your ISP provides you with a dedicated IP address (which does not change as DHCP). Internet Connection Type : Select the Stat ic IP from the drop-down list. A ...
-
EnGenius EOC-2610 - page 47
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 47 Domain Name Service : Se lec t Get Automatically from ISP if the ISP wi ll provide the DNS address, if not, select Use these DNS servers and s pecify the primary and secondary DNS server IP address. Router MAC Address : If you need to change the MAC ad dress of the router’s ...
-
EnGenius EOC-2610 - page 48
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 48 Service Name : Specify the name of the ISP. Type : Select a reconnection type: Keep Alive (A connection to the Internet is always maintained), Co nne ct on De mand : You have to open up the Web-based management interface a nd click the Connect butto n manually any time that y ...
-
EnGenius EOC-2610 - page 49
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 49 Wireless Mode : Depending on the ty pe of wireless clients that a re connected to the networ k, you may se lect B , G , or B/G- mixed . If you are not s ure about which clients will be accessing the wireless networks, it is recommended that you select B/G- mixed for the best perf ...
-
EnGenius EOC-2610 - page 50
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 50 Authentication Type: Select an authentication method. Options available are Open Key , Shared Key or Aut o . An open system allows any client to authenticate as long as it conforms to any MAC address filter policies that may have been set. All authen tication packets ar e transmi ...
-
EnGenius EOC-2610 - page 51
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 51 Encryption : Select TKIP or AES fr om the drop-down list if your wireless network uses this encryption. WPA (Wi-Fi Protected A ccess) was designed to improve upon the security features of WEP (Wired Equivalent Privacy). The technology is designed to work with existing Wi-Fi produ ...
-
EnGenius EOC-2610 - page 52
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 52 You can arrange the different data r ate in distance in Access Point mode. P lease refer below table. The table only for 11g and 11b/g mix mode 6M-24M 36M 48M 54M High ˇ ˇ ˇ Great Ultra High ˇ ˇ Great N/A Super ˇ Great NA N/A Extreme Great N/A N/A N/A Fragment : Packets ...
-
EnGenius EOC-2610 - page 53
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 53 Name : Spec ify a us er name into the first field. Password : Specify a password into this field and then re-ty pe the password into the Confirm Password field. Web Access : Select normal web access HTTP or secured web access HTTPS . Remote Management : Choose to enab ...
-
EnGenius EOC-2610 - page 54
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 54 SNMP Enable / Disable : Ch oose to enable or disable the SNMP feature. Contact : Specify the contact details of the device. Location : Specify the location of the device. Read-Only Community Name : Specify the password for access the SNMP community for read only acces ...
-
EnGenius EOC-2610 - page 55
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 55 Restore saved settings from a file : Once a file has bee n backed up, you may restore it by clicking on the Browse button to select the file, and then the Restore button. Revert to factory default settings : Click on the Factory Default Settings button to reset the device to ...
-
EnGenius EOC-2610 - page 56
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 56 Manually Set Date and Time : Specify the dat e and time Automatically Get Date and Time : Select the time zone from the drop down list and then s pec ify t he IP addre ss of the N TP serv er. Click on the Apply button to save the changes. 5.5.12 Log Cli ck on t he Log ...
-
EnGenius EOC-2610 - page 57
Long Range Wireless Acce ss Point / Client Bridge V ersion 1.0 57 Appendix A – Specifications Hardware S pecification MCU/R F Ather os AR2316 S ingle chi p Memory 32MB SDRAM Flash 8MB Physical Interface One 10/100 Fast Ethernet RJ-45 Reset Button One SM A Connecto r One switch (external and internal antenna switching) LED indicators Power/ St atu ...
-
EnGenius EOC-2610 - page 58
Multi-Function Gig abit Wireless- N Client Bridge V ersi on 1.0 58 GHz IEEE802.1 1b GHz IEEE802.1 1b To l e r a n c e ± 1 dBm To l e r a n c e ± 1 dBm Internal Antenna Embedded 10dBi Panel antenna External Antenna 1* SMA connector Soft ware Features General T opology Infrastructure Protocol / S tandard IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethe ...
-
EnGenius EOC-2610 - page 59
Multi-Function Gig abit Wireless- N Client Bridge V ersi on 1.0 59 SNMP V1, V2c (Phase 2) MIB MIB I, MIB II (RFC1213) and Private MIB Backup & Restore S ettings through W eb Ti me setting NTP (Auto-setting of time) T ime setting manually Environmental and Mechanical T emperature Range Operating -20°C~70°C S torage -30°C to 80°C Humidity (no ...
-
EnGenius EOC-2610 - page 60
Multi-Function Gig abit Wireless- N Client Bridge V ersi on 1.0 60 Appendix B – FCC Interference Statement Federal Communication Commission Interference St atement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These li mits are designed to provide reasonable ...
¿Tienes una pregunta acerca de EnGenius EOC-2610?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con EnGenius EOC-2610, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con EnGenius EOC-2610 probablemente compartirá una forma de solucionarlo.