-
Kenmore 437.85264 - page 1
OPERATOR'S MANUAL -i ® INFO - LINE: After reading this manual, if you have any questions or comments on your Kenmore Air Cleaner, call 1-888-277-2810 0M-85264 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. ...
-
Kenmore 437.85264 - page 2
IMPORTANT SAFETY INSTRUCTIONS Please read all instructions before using this product. Save these instructions for easy reference. When using electrical appliances, basic precautions should always be followed to reduce breakage, risk of fire, electric shock and injury to persons including the following. o Read all instructions before operating the a ...
-
Kenmore 437.85264 - page 3
[_1 ARNING! Toreduce the risk of fire or electric shock, DO NOT use this product with any solid-state speed control device. ONEoyEAR FULL WARRANTY ON KENiViORE AIR CLEANER For one year from the date of purchase, when operated and maintained according to the owner's manual, if any part of this air cleaner fails due to a defect in material or wo ...
-
Kenmore 437.85264 - page 4
SET UP Your Electrostatic Air Cleaner was thoroughly inspected and tested at the factory prior to packaging. Visually inspect it upon removal from the box. Remove and discard any packing material. Return the unit if it shows any signs of damage or mishandling. Contents: o Electrostatic Air Cleaner o 2 Protective Screens (Only used when cleaning the ...
-
Kenmore 437.85264 - page 5
HOW IT WORKS Dirty air is drawn through the front grill and passes through a 3-stage cleaning system (See Fig. 1). Stage 1 The washable Pre-filter prevents larger particles from passing through into the Collecting Cell. Stage 2 The Collecting Cell has a 2-part function. First, the dirt particles not trapped by the Pre-filter are electrically charge ...
-
Kenmore 437.85264 - page 6
OPERATION Fig. 2 G. Hourmeters [iliil I i gill Clean Cell NOW I H. LCD Display A. Check F. Ionizer button Pre=filter D. Power ON/OFF button When unit is on, all control B. Check Cell buttons are lit E. Timer button C. Speed button Allows you to set time Set desired speed of operation desired POWER ON/OFF TO START AIR CLEANER (See Fig. 2 D ) Press t ...
-
Kenmore 437.85264 - page 7
OPERATION cont. Each time you start your Air Cleaner, we recommend that you run it at Turbo speed for a few minutes for fast initial cleaning. The Ionizer, when turned ON, adds negative ions to the exiting stream of clean air. This function provides additional air freshening and revitalization. Then set it to HI, MED, or LO as desired. TO TURN IONI ...
-
Kenmore 437.85264 - page 8
MAINTENANCE CLEANING SCHEDULE Your air cleaner also has built=in cleaning reminders to let you know when the Pre-Filter and Collecting Cell should be cleaned. The Pre-Filter and Collecting Cell require periodic cleaning in order for the air cleaner to operate at peak efficiency. The frequency of cleaning will depend on the environment in which the ...
-
Kenmore 437.85264 - page 9
MAINTENANCE CLEANING THE PRE-FILTER When the Check Pre-Filter light is flashing (See fig. 2 A), it is time to clean the pre-filter. 1. Turn off the air cleaner by pressing the Power Switch. Then unplug the unit from the electrical outlet. [_ AUTION: To avoid harmless static shock that may occur, DO NOT touch unit for 2 minutes after turning OFF and ...
-
Kenmore 437.85264 - page 10
MAINTENANCE 7. Plug the air cleaner back into a properly grounded 3-prong outlet. 8. Press the power On button. 9. Press the Check Preofilter button to reset it. CLEANING THE CELL (See Fig. 3) When the Check Cell light is flashing, it is time to clean the cell. 1. Turn Off the air cleaner by pressing the Power Button. Then unplug the unit from the ...
-
Kenmore 437.85264 - page 11
MAINTENANCE Washing Cell in a Tub of Hot Water; Recommended Method (See Fig. 3) 1. Fill a tub large enough to hold the entire cell with hot water (140 ° to 160°F.) and add detergent. Use a mild dishwashing liquid that is non-chlorine and non-abrasive. Agitate the solution for proper mixture. NOTE: Wear gloves to protect your hands. 2. Hold the ba ...
-
Kenmore 437.85264 - page 12
MAINTENANCE Washing Cell in a Dishwasher (See Figures 4 and 5) NOTE: The dishwasher cavity must be large enough to accommodate the cell without any interference with moving parts in the dishwasher. CAUTION: DO NOT use dishwashing detergent when cleaning cell in automatic dishwasher. Dishwasher detergent is abrasive and may damage cell. Operate dish ...
-
Kenmore 437.85264 - page 13
MAINTENANCE Extra Cleaning of Cell Occasionally, a few particles of dirt may pass through the pre-filter and enter the cell. The cell will begin making snapping sounds. If the snapping sounds continue, turn off the unit and wash the cell as described in the previous two sections. GENERAL CLEANING To Clean the Outside of the Air Cleaner Cabinet 1. T ...
-
Kenmore 437.85264 - page 14
MAINTENANCE TROUBLESHOOTING PROBLEM Unit will not start when On Button is pushed. SOLUTION 1. Check to be sure that the power cord is plugged into a properly-grounded 3-prong 120-v., AC outlet. 2. Check the electrical outlet by plugging in a working appliance or test light. 3. Unplug the unit. Remove and reassemble the front grill to make sure it i ...
-
Kenmore 437.85264 - page 15
i ii i !!ii ii ! Your Home !iiiii!! !! iiii iiiiii ii,i ! i! !i! !i i!iil For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it.v For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears prof ...
¿Tienes una pregunta acerca de Kenmore 437.85264?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Kenmore 437.85264, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Kenmore 437.85264 probablemente compartirá una forma de solucionarlo.