Español dropdown-ico

Manual de instrucciones Conair S900II

32 de páginas 0.76 mb
Descargar

Pasar a la página of 32

Summary
  • Conair S900II - page 1

    SY STEM CONFIGURA TION for S900II robots Software V ersion 1.0 Corporate Office: 412.312.6000 l Instant Access 24/7 (Parts and Service): 800.458.1960 l Parts and Service: 814.437.6861 USERGUIDE www .conairnet.com W ARNING - Reliance on this Manual Could Result in Se vere Bodily Injury or Death! This manual is out-of-date and is provided only f or i ...

  • Conair S900II - page 2

    ...

  • Conair S900II - page 3

    System Configuration S900II I – Memory 1 01T01350_0 2.2.98 I – MEMOR Y I – 1. Accessing the memory After accessing ”Memory Management” by pressing [Memo_M] (programming menu), pressing the [M_Read] key gives access to the read (or modification) function of the user and system RAM or EEPROM memory (at the address of the memory box by defau ...

  • Conair S900II - page 4

    System Configuration S900II I – Memory 2 01T01350_0 2.2.98 * The function keys F1 to F5 :  [Address] to change the address.  [Modif] to change the contents of the memory area displayed (word).  [Search] to search for a particular word (e.g. : F A1B)  [Print] to print the memory contents from the displayed address (in order to search f ...

  • Conair S900II - page 5

    System Configuration S900II I – Memory 3 01T01350_0 2.2.98 I – 2. Memory areas I – 2. 1.Data saved in RAM (512 K x 8) 0 to 7 FFFF Addr ess in Hexadecimal Contents 00000 V ariables used by Philips (BOOT) 027FF 02800 “Fixed” SEPRO variables, see table below for details of the variables 0A4FF 0A500 SEPRO parameters in RAM 0B2FF 0B300 PRG sto ...

  • Conair S900II - page 6

    System Configuration S900II I – Memory 4 01T01350_0 2.2.98 I – 2. 2.Program addr essing in memory The PRG and PLC programs are stored in the RAM memory , starting from the address 0xB300. The maximum length of a PRG is 12286 bytes ; 4096 bytes for a PLC. This area reserved for the permanent storage varies depending on the option 32 to 128 Kbyte ...

  • Conair S900II - page 7

    System Configuration S900II I – Memory 5 01T01350_0 2.2.98 Block number Addr ess in Hexadecimal Contents F10 C0000 Messages in language 1 F10 CEBEF F10 CEBF0 Messages in language 2 F10 DD7DF F10 DD7E0 Font robot 1 F10 DE7EF F10 DE7F0 Font robot 2 7th block F10 DF7FF F10 DF800 Messages Code converter table IMM 1 F10 DF9FF F10 DF A00 Code converter ...

  • Conair S900II - page 8

    System Configuration S900II I – Memory 6 01T01350_0 2.2.98 I – 3. Specific information These are directly accessed using the Memory Read function followed by the request [Address] and a letter : – to access the memory area containing the passwords. – to access the memory area containing the serial number and the type of robot. 15 0 Password ...

  • Conair S900II - page 9

    System Configuration S900II II – Instruction codes 7 01T01350_0 2.2.98 II – INSTRUCTION CODES II – 1. Part programs T ype of Instruction Display Codop (hexadecimal) Examples ACTION ACT 00 (to 99) * A000 [oper . 16 bits] A000000C = ACT12 OUTPUT OUT 000 (to 255) * A001 [oper . 16 bits] A0010050 = OUT080 INPUT IN 000 (to 255) A002 [oper . 16 bit ...

  • Conair S900II - page 10

    System Configuration S900II II – Instruction codes 8 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples VEL.X WW_*nn B050 0000 [oper .12bits] B0500042 = VEL.X WW066 VEL.Y WW_*nn B051 0000 [oper .12bits] B0510043 = VEL.Y WW067 VEL.Z WW_*nn B052 0000 [oper .12bits] B0520042 = VEL.Z WW066 VEL.B WW_*nn B053 0000 [oper .12bits ...

  • Conair S900II - page 11

    System Configuration S900II II – Instruction codes 9 01T01350_0 2.2.98 MOTORIZED MOTIONS SLOW APPROACH SLA.X 001 to 100 B020 [oper . 16 bits] B0200026 = SLA.X 026 in % of the maximum SLA.Y 001 to 100 B021 [oper . 16 bits] B0210034 = SLA.Y 034 parametered speed SLA.Z 001 to 100 B022 [oper . 16 bits] B0220090 = SLA.Z 090 SLA.B 001 to 100 B023 [oper ...

  • Conair S900II - page 12

    System Configuration S900II II – Instruction codes 10 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples CHECKING X.CTL_R Angle C130[oper .8bits][oper .24bits] C13000000664=X.CTL.R00163.6 Y .CTL_R Angle C131[oper .8bits][oper .24bits] C131000F423F=Y .CTL.R9999.9 Z.CTL_R Angle C132[oper .8bits][oper.24bits] C13200000320=Z. ...

  • Conair S900II - page 13

    System Configuration S900II II – Instruction codes 1 1 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples RELA TIVE X.REL_R WW *nn C320 [oper . 16 bits] C3200001 = X.REL.R WW01 Y .REL_R WW *nn C321 [oper . 16 bits] Z.REL_R WW *nn C322 [oper . 16 bits] B.REL_R WW *nn C323 [oper . 16 bits] C.REL_R WW *nn C324 [oper . 16 bit ...

  • Conair S900II - page 14

    System Configuration S900II II – Instruction codes 12 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples LINEAR POS_ANA X = POS ANA + distance C060 [oper . 32 bits] Y = POS ANA + distance C061 [oper . 32 bits] Z = POS ANA + distance C062 [oper . 32 bits] B = POS ANA + distance C063 [oper . 32 bits] C = POS ANA + distance ...

  • Conair S900II - page 15

    System Configuration S900II II – Instruction codes 13 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples ROT A TING POS_ANA X = POS ANA + angle C160 [oper . 32 bits] Y = POS ANA + angle C161 [oper . 32 bits] Z = POS ANA + angle C162 [oper . 32 bits] B = POS ANA + angle C163 [oper . 32 bits] C = POS ANA + angle C164 [oper ...

  • Conair S900II - page 16

    System Configuration S900II II – Instruction codes 14 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples TEST , CONDITIONS . 1 Operand on Bit IF BIT 000 (to 127) D000 [oper . 16 bits] IF/BIT 000 (to 127) D010 [oper . 16 bits] on Output IF OUT 000 (to 255) D001 [oper . 16 bits] IF/OUT 000 (to 255) D01 1 [oper . 16 bits] on ...

  • Conair S900II - page 17

    System Configuration S900II II – Instruction codes 15 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples * on WW ord (32 bits) IF WWRD 000 (to 127) D320 [oper . 16 bits] –> 1st Operand IF/WWRD 000 (to 127) D330 [oper . 16 bits] with decimal value = 00000000 (to 09999999) D500 [oper . 32 bits] > = 00000000 (to 0999 ...

  • Conair S900II - page 18

    System Configuration S900II II – Instruction codes 16 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples with Inputs (modulo 16) = IN 000 (to 1 12) D930 [oper . 16 bits] > = IN 000 (to 1 12) D931 [oper . 16 bits] < = IN 000 (to 1 12) D932 [oper . 16 bits] AND IN 000 (to 1 12) D933 [oper . 16 bits] with W ord (16 bit ...

  • Conair S900II - page 19

    System Configuration S900II II – Instruction codes 17 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples with Counter = CNT 00 (to 15) D720 [oper . 16 bits] + CNT 00 (to 15) D721 [oper . 16 bits] – CNT 00 (to 15) D722 [oper . 16 bits] x CNT 00 (to 15) D723 [oper . 16 bits] / CNT00 (to 15) D724 [oper . 16 bits] AND CNT 0 ...

  • Conair S900II - page 20

    System Configuration S900II II – Instruction codes 18 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples with Inputs (modulo 16) = IN *nn D830 [oper . 16 bits] + IN *nn D831 [oper . 16 bits] – IN *nn D832 [oper . 16 bits] *nn = 00 to 1 12 x IN *nn D833 [oper . 16 bits] and 136 to 240 / IN *nn D834 [oper . 16 bits] AND I ...

  • Conair S900II - page 21

    System Configuration S900II II – Instruction codes 19 01T01350_0 2.2.98 T ype of Instruction Display Codop (hexadecimal) Examples with Inputs (modulo 16) = IN 000 (to 1 12) DA30 [oper . 16 bits] + IN 000 (to 1 12) DA31 [oper . 16 bits] – IN 000 (to 1 12) DA32 [oper . 16 bits] x IN 000 (to 1 12) DA33 [oper . 16 bits] / IN 000 (to 1 12) DA34 [ope ...

  • Conair S900II - page 22

    System Configuration S900II II – Instruction codes 20 01T01350_0 2.2.98 II – 2. PLC programs T ype of Instruction Display Codop (hexadecimal) PROG.PLC xx header (num) PLC xx FC [oper . 16 bits] TEST CONDITION IF ... See part programs INITIALISA TION SET ... See part programs RST ... INC ... DEC ... COMP ARISON xxxx > = xxxx CMP 0000 (to 0015 ...

  • Conair S900II - page 23

    System Configuration S900II III – Pr ogram codes 21 01T01350_0 2.2.98 III – PROGRAM CODES III – 1. Declaration of programs, subr outines and PLCs " Header codes of PRG, SP ,..., SR, PLC G F9b xn = Main program G b = 0, standard PRG (encoded on 15 bits) b = 1 , SAP PRG (encoded on 15 bits) G F Ann = STD, STK.. // subroutine (see stacking ...

  • Conair S900II - page 24

    System Configuration S900II III – Pr ogram codes 22 01T01350_0 2.2.98 III – 2. Subroutine and pr ogram calls " SPECIFIC codes for SP , SR, PLC as an instruction G E000 [oper . 16 bits] : Standar d SP SP nn Lmm (nn = 01 to 40) (mm = 00 to 99) Regular Stacking SP SP nn D Lmm (or I Lmm) (nn = 41 to 60) (mm = 00 to 99) General Stacking SP SP n ...

  • Conair S900II - page 25

    System Configuration S900II IV – V ariable addr essing 23 01T01350_0 2.2.98 IV – V ARIABLE ADDRESSING IV – 1. Output – OUT – Accessible in read and write. Number (logical address) Physical address Structures / Functions OUT 000 OUT 255 28A0 299F 2 A1D OUT 125 not used Forcing (Extended monitor) Continuous status (See Param. No 14) IV – ...

  • Conair S900II - page 26

    System Configuration S900II IV – V ariable addr essing 24 01T01350_0 2.2.98 IV – 4. 16 bits user and system words – WRD – WRD 0000 2AA0 WRD 0031 2ADF WRD 0032 2AE0 WRD 0063 2B1E WRD 0064 2B20 WRD 0079 2B3F WRD 0080 2B40 WRD 0095 2B5F WRD 0096 2B60 WRD 4096 3A9F 32 user W ords (read/write) with no predefined functions. B15 0 16 bit structure ...

  • Conair S900II - page 27

    System Configuration S900II IV – V ariable addr essing 25 01T01350_0 2.2.98 IV – 6. Counters Each address corresponds to a 16 bit structure in the memory . 2 B4x CNT0008 WRD0088 . values from 0000 to 9999 in decimal . values from 0000 to FFFF in hexadecimal b15 b0 x = bit number in hexadecimal (e.g.: CNT 0008, address = 2 B50). – Standard cou ...

  • Conair S900II - page 28

    System Configuration S900II V – CPU fault signalling 26 01T01350_0 2.2.98 V – CPU F AUL T SIGNALLING V – 1. Flashing Leds These signal a CAN network fault by displaying the problem number in binary on the LEDs at the bottom of the CPU, and the node number (if concerned) on the LEDs at the top if the pendant is not functioning. 30 1 = CAN driv ...

  • Conair S900II - page 29

    System Configuration S900II V – CPU fault signalling 27 01T01350_0 2.2.98 V – 2. Fixed Leds These signal a fault when powering up by giving the problem number in binary on the LEDs at the bottom of the CPU, and the node number (if concerned) on the LEDs at the top if the pendant is not functioning. 1 = Problem with recovering the parameters in ...

  • Conair S900II - page 30

    parameter 175 2 in the case of restart with programmed delay System Configuration S900II VI – IMM Anticipated Restart 28 01T01350_0 2.2.98 VI – IMM ANTICIP A TED REST ART " Parameter 174 : type of IMM anticipated restart G 0 : no anticipated restart G 1 : anticipated restart G 2 : programmed delay anticipated restart –> WWRD 63 progra ...

  • Conair S900II - page 31

    System Configuration S900II VI – IMM Anticipated Restart 29 01T01350_0 2.2.98  Safety circuit principle. A hard–wired circuit controls the respective positions of the moving mould (“MO” = Mould Open signal) and of the robot (“ZBD” = Arm Free Area / “ZHM” = Outside Mould Area signal). The output of this hard–wired circuit (”MO ...

  • Conair S900II - page 32

    System Configuration S900II VI – IMM Anticipated Restart 30 01T01350_0 2.2.98 IF IN XX SET WORD 62 = 200 Until a parameter for the control input for the anticipated restart safety circuit is integrated into the software, this input must be monitored and a fault must be generated using the monitoring PLC. RELANCE ANTICIPEE NON CONFORME : in French ...

Fabricante Conair Categoría Robotics

Los documentos del dispositivo Conair S900II que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Conair
- manuales de instrucciones S900II
- hojas de producto Conair
- folletos informativos
- o etiquetas energéticas Conair S900II
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Conair S900II.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Conair S900II, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Conair S900II. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Conair S900II.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Conair S900II, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Conair S900II. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Conair S900II.

El manual de instrucciones completo de Conair debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Conair S900II - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Conair S900II, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Conair S900II que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Conair S900II - que deben facilitarnos los primeros pasos durante el uso de Conair S900II
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Conair S900II
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Conair S900II en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Conair S900II?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Conair S900II, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Conair S900II probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)