-
NEC E6000/PB - page 1
V ersa E6000 Disassembly Manual ...
-
NEC E6000/PB - page 2
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 2 Table of contents Overview ................ ................... ............... ................... ................... ................... ............ .......... ................... .............3 Technician Notes .............................. ... .... .... ....... .... .... .... .... .. ...
-
NEC E6000/PB - page 3
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 3 Overview This document contains step-by-steps disassembly instru ctions for the Versa E6000 /EasyNote G5 chassis. The instructions are illustrated where nece ssary with images of the part that is being removed or disassembled . Furthermore, the screw s that are re moved are s hown nex t to ...
-
NEC E6000/PB - page 4
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 4 Hazardous Voltag e There is hazardous voltage pr esent inside the computer when it is connect to an AC supply , even w hen the computer’s power switch is off. Exposur e to hazardous voltage could cause personal injury. To avoid r isk of injury, contact an Authorized Service Provider for p ...
-
NEC E6000/PB - page 5
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 5 Removing the Battery Perform the following steps to remove the battery: 1. Make sure to pow er of f th e Versa E6000/E asyNot e G5. 2. Turn the unit upside do wn. 3. Unlock the batte ry and slide it out of its place as th e arrow shows in Fig. 1 Fig. 1 Re moving the battery ...
-
NEC E6000/PB - page 6
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 6 Removing the Memory Module To remove the Memory Module, first remove th e battery (see Removing th e Battery ), then perform the following steps: 1. Release the one screw retaining the me mory modul e cover. Fig. 2 Removing the screw retaining the memory module sl ot cover 2. Unclip the mem ...
-
NEC E6000/PB - page 7
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 7 Removing the MDC Modem To remove the MDC Modem, first remove the Memory Module Cover ( see Removing Memory Module ) then perform the following steps: 1. Release screw s and disc onnect cable on MCD M odem as s hown in F ig. 4 Fig. 4 MDC Mo d e m 2. Lift up the MD C modem and put it aside. M ...
-
NEC E6000/PB - page 8
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 8 Removing the Hard Disk Drive To remove the hard disk drive, first remo ve the battery (see Removing the Battery ), then perform the following steps: 1. Remove t he screws as shown in Fig. 5 Fig. 5 Removing the Hard disk drive cover 2. Release the scre ws that secure HDD module as shown in F ...
-
NEC E6000/PB - page 9
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 9 Removing the Keyboard To remove the Keyboard , first remove the battery (see Removing the Battery ), th en perform the following steps: 1. Release the keyboard cover from the rear of the syst em as show n in Fig. 7 Fig. 7 Releasing the keyboard cover 2. Lift up the keyboard cover carefully ...
-
NEC E6000/PB - page 10
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 10 3. Lift up the keyboard and disconnect it from the system as shown in Fig. 9 Fig. 9 Disconnecting the keyboard flat cab le Removing the Optical Disk Drive To remove the ODD, first remove the battery (see Removing the Ba ttery ) and remove the Keyboard (see Removing the Keyboard ) then perf ...
-
NEC E6000/PB - page 11
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 11 2. Flip over the unit, and pus h the ODD module out from the bas e unit as show n in Fig. 11 Fig. 11 Pushing the optical drive out from the base unit ...
-
NEC E6000/PB - page 12
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 12 Removing the LCD Module To remove the LCD Module first remove the battery (see Removing the Battery ) and remove the Keyboard ( see Removing the Keyboard ) then perform the following steps : 3. Remove the screws re tain ing the Heat Plate as shown in Fig. 12 Fig. 12 Remo ving t h e screw s ...
-
NEC E6000/PB - page 13
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 13 6. Open up the LCD lid, re lease the screws and the LCD cable connector. Fig. 15 Re moving screws retaining LCD Cable Connector 7. Carefully lift up the LCD Module. Removing the WLAN Card Module To remove the WLAN Card Module first remove the battery (see Removing the Battery ), remove the ...
-
NEC E6000/PB - page 14
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 14 Removing the LCD Pane l To remove the LCD panel, first remove th e LCD module (see Removing the LCD Module ), then perform t he following st eps: 1. Use a pin to remove th e rubber cover on the LCD mo dule as shown in Fig. 17 2. Remove all screws as shown in Fig. 17 and remove carefully th ...
-
NEC E6000/PB - page 15
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 15 4. Carefully lift up the LCD pane l. 5. Remove the scre ws at both sides of the LCD panel in order to release the LCD hinges as shown in Fig. 19 Fig. 19 Removing the LCD Pa nel h in ges Removing the CPU To remove the CPU first remove the battery (see Rem oving the Battery ) and remove the ...
-
NEC E6000/PB - page 16
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 16 2. Remove the CPU Fan scr ews, disconnect the CPU Fan connector and re move the CPU Fan. Fig. 21 CP U Fan 3. Unscrew screw s on CPU Heat Si nk in desc ending or der (3 Æ 2 Æ 1) as show n in Fig. 22 Fig. 22 CPU Heat Sink M2.5x6.5 Silver M2.5x4 Copper ...
-
NEC E6000/PB - page 17
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 17 Note: Beware of screws u se on the CPU hea t sink! Make sure to use the screw si ze M2.5x4, otherwise it might cause damage to the CPU die. When install heat sink, screws must be secured in ascending order (1 Æ 2 Æ 3). 4. Unlock the CPU from the CPU socket a nd lift up the CPU carefully. ...
-
NEC E6000/PB - page 18
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 18 Removing the Top Cover To remove the Top Cover , first remove the battery (see Removing the Battery ), remove the HDD (see Remov ing the H ard Di sk Dr ive ), remove the Optical Disk Drive (see Removing t he Optical Disk Drive ), remove the Keyboard (see Removing th e Keyboard ) and remove ...
-
NEC E6000/PB - page 19
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 19 2. Release all screws on the to p cover as shown in Fig. 25 Fig. 2 5 Top Cover screws 3. Discon nect the Touc h Pad C onnector a s show n in Fig. 26 Fig. 26 Touch Pad connection 4. Carefully lift up the Top Cover. A = M2.5x5 Si lver B=M2.5x6 Silver ...
-
NEC E6000/PB - page 20
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 20 Removing the Touch Pad To remove the touch pad, first remove the top cover (see Removing the Top Cover ), then perform the following steps: 1. Unscrew the screw s on the To p Cover a s show n in Fig. 27 Fig. 27 Touch Pad 2. Carefully separ ate the Touch Pad module from Top cover. M2x4 S il ...
-
NEC E6000/PB - page 21
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 21 Removing the Main Board To remove the Main Board, first rem ove the Top Cover (see Removing Top Cover ) then perform the following steps: 1. Remove the Hex scr ews from the VGA Port as sho wn in Fig. 28 Fig. 2 8 VGA Port 2. Unscrew th ose screws o n H D D holder as shown in Fig. 29 an d se ...
-
NEC E6000/PB - page 22
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 22 3. Discon nect Audio board from main bo ard as s hown in Fig. 30 Lifting up the audio board 4. Discon nect Speak er and Lid switch con nectors f rom the Main bo ard as shown in Fig. 31 Fig. 31 Connectors on M ain Board ...
-
NEC E6000/PB - page 23
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 23 5. Unscrew the screws enc ircled in Fi g. 32 Fig. 3 2 Screws on Main Board 6. Lift up the Main Boar d as shown in Fig. 33 Fig. 33 Lifting up the Main Board A = M2.5x8 B = M2.5x5 Silver ...
-
NEC E6000/PB - page 24
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 24 Removing the Speaker Assembly To remove the Speaker Assembly, first re move the Main Board (see Remo ving the Main Board ) then perform the following steps: 1. Remove the scre ws holding Speaker Assembly as shown in Fig. 34 Fig. 34 Speaker Assembly 2. Carefully remove the Speaker a ssembly ...
-
NEC E6000/PB - page 25
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 25 DIP Switch Settings Jum per 1-2 Open Open Clos e Open Open 3-4 Open Open Clos e C l os e Cl os e 5-6 Open Clos e Clos e C l os e Open Logo NE C NE C NE C NE C P B Se ttin g J P co n s u me r J P C o mme r cia l APAC H K/C N EU St atus 2 6 5 1 10 9 ...
-
NEC E6000/PB - page 26
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 26 Screws M3x8 Silver M2.5x6.5 Silver M2.5x9 Silver M2.5x7 Silver M2.5x5 Silver M2x7 Silver M2.5x8 Silver M2x8 Silver M2.5x10 Silver M2x4 Silver M2.5x6 Silver M2.5x4 Copper ...
-
NEC E6000/PB - page 27
NEC Versa E6000/PB Eas y Note G5 Disassembly Manual Page 27 Notice The information in this guide is subject to chan ge without notice. This guide contains information protected by copyright. No part of this gu ide may be photocopied or reproduced in any form or by any means without pr ior written consent from NEC Computer s International BV. NEC CO ...
¿Tienes una pregunta acerca de NEC E6000/PB?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con NEC E6000/PB, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con NEC E6000/PB probablemente compartirá una forma de solucionarlo.