Español dropdown-ico

Manual de instrucciones Panasonic AK-HCU200PS

40 de páginas 4.78 mb
Descargar

Pasar a la página of 40

Summary
  • Panasonic AK-HCU200PS - page 1

    Operating Instructions <Operations and Settings> Camera Control Unit  ModelNo.  AK-HCU200P  ModelNo.  AK-HCU200PS  ModelNo.  AK-HCU200E  ModelNo.  AK-HCU200ES VQT4T42A(E) M1012TY0-FJ ENGLISH   Howt heOpe rating Instr uction sare config ured <Basic s>:    The<B ...

  • Panasonic AK-HCU200PS - page 2

    2 Contents Picture monitor (PM) displays                                3 S w i t c h i n g t h e d i s p l a y  3 T r a n s i t i o n o f d i ...

  • Panasonic AK-HCU200PS - page 3

    3 Picture monitor (PM) displays Switching the display Display the camera statuses, warnings, and other information on the picture monitor using the operation panel of the ROP  Press the CHARA button of the ROP to display the desired information The camera statuses, warnings, and other information are cleared when the CHARA button of the ROP i ...

  • Panasonic AK-HCU200PS - page 4

    4 Description of information displayed   W ARNING The warning information is displayed when trouble is detected in the unit, camera, or optical fiber multi cable The warning information items are displayed top aligned A displayed warning information item is cleared when the status becomes normal - WARNING - CAM RCV LVL NG CCU RCV LVL ...

  • Panasonic AK-HCU200PS - page 5

    5   Status displays (page 1 of 4) From the status display screen, press the CHARA button of the ROP to display the first page of the status displays 1/4 -STATUS1- CAM NO. 1 MASTER GAIN 0dB 5600K OFF GAMMA OFF KNEE OFF WHITE CLIP OFF BLACK GAMMA OFF HD DETAIL OFF HD SKIN DETAIL OFF MATRIX OFF Item Display range Remarks CAM No 1 │ 19 Th ...

  • Panasonic AK-HCU200PS - page 6

    6   Status displays (page 3 of 4) From the status displays (page 2 of 4) screen, press the CHARA button of the ROP to display the third page 3/4 -STATUS3- DOWNCONVERT MODE SC UPCONVERT MODE SC RETURN1 HD SDI1 RETURN2 HD SDI2 RETURN3 HD SDI1 RETURN4 HD SDI2 SDI RETURN1 HD SDI RETURN2 HD SDI OUTPUT1&2 HD SDI OUTPUT3&4 HD NORMAL/PM NO ...

  • Panasonic AK-HCU200PS - page 7

    7   Operation displays (manual) The operation displays appear at the bottom of the screen for 4 seconds when any of the following operations have been performed with the operation panel of the ROP   “MASTER GAIN” is changed  “SHUTTER” is changed  “LENS EXT” is changed  “FIL TER” is changed  “SCENE FILE” i ...

  • Panasonic AK-HCU200PS - page 8

    8 *1: [AUTO NG1 detailed information] The AUTO NG1 detailed information is displayed flashing on the screen Rch OUT RANGE Gch OUT RANGE Bch OUT RANGE A WB LOW LIGHT A WB HIGH LIGHT *2: [AUTO SETUP operation information] The AUTO SETUP operation information is displayed on the screen BSHD OPERA TION FLARE OPERA TION ABB OPERA TION A WB OPER ...

  • Panasonic AK-HCU200PS - page 9

    9 Menu operations While viewing the menu screen of the picture monitor , operate the MENU button and SELECT dial on the front panel MENU button SELECT dial Displaying and hiding the menus 1 Hold down the MENU button The menu screen appears and the MENU button lights “TOP MENU” appears first  If the MENU button is held down when t ...

  • Panasonic AK-HCU200PS - page 10

    10 Changing the setting value of a setting item A number of items and the set values are displayed on the setting screen at the lowest level 1 T urn the SELECT dial to move the cursor to the menu item you want to set, and then press the SELECT dial The setting value of the selected menu item starts flashing and you can change it SETTING ...

  • Panasonic AK-HCU200PS - page 11

    1 1 Setting menu items TOP MENU This is the first screen displayed when you hold down the MENU button Select one of the menus TOP MENU OPERATION MAINTENANCE   OPERA TION Select this to open the OPERA TION menu screen   MAINTENANCE Select this to open the MAINTENANCE menu screen OPERA TION menu This is the selection screen fo ...

  • Panasonic AK-HCU200PS - page 12

    12   SETTING2 Screen This is the selection screen for the SETTING2 menu Moving the cursor to the “SETTING2” menu title and then pressing the SELECT dial redisplays the OPERA TION menu one level up SETTING2 FS DELAY NORMAL HD BAR SELECT ARIB BAR LPF 7TAP BAR USER1 75%WHITE BAR USER2 0%BLACK SETUP 7.5% OFF PATHO OFF indicates the fact ...

  • Panasonic AK-HCU200PS - page 13

    13   HD/SD PHASE Screen This menu is used for the HD signal and SD signal phase adjustments Moving the cursor to the “HD/SD PHASE” menu title and then pressing the SELECT dial redisplays the OPERA TION menu one level up HD/SD PHASE HD H PHASE 0 SD H PHASE 0 SD-HD V 0H indicates the factory default setting Item Setting value Remar ...

  • Panasonic AK-HCU200PS - page 14

    14   SD signal phase <1080i/5994 Hz format> Setting of SD-HD V item: 0H 2 3 4 5 6 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 2 3 4 5 6 GEN LOCK Black burst signal CCU_VBS/SDI (SD)_OUT CCU_HD_SDI_OUT 90H (HD) LINE CAM_HD_SDI_OUT   358 BB signal (525/5994/I)   VBS/SDI (SD) signal (525/ ...

  • Panasonic AK-HCU200PS - page 15

    15 Setting of SD-HD V item: 0H_SD_DLA Y (1FRAM–90H DL Y) 2 3 4 5 6 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 2 3 4 5 6 GEN LOCK Black burst signal CCU_VBS/SDI (SD)_OUT 1FRAM–90H (HD) LINE CAM_HD_SDI_OUT CCU_HD_SDI_OUT   358 BB signal (525/5994/I)   VBS/SDI (SD) signal (525/5994/I)   H ...

  • Panasonic AK-HCU200PS - page 16

    16 Setting of SD-HD V item: ADV ANCE (75H) 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 624 625 1 2 3 4 624 625 1 2 3 4 GEN LOCK Black burst signal CCU_VBS/SDI (SD)_OUT 75H (HD) LINE CAM_HD_SDI_OUT CCU_HD_SDI_OUT   443 BB signal (626/50/I)   VBS/SDI (SD) signal (626/50/I)   HD_SDI signal (1 125/50 ...

  • Panasonic AK-HCU200PS - page 17

    17 Setting menu items (Continued)   HD signal phase <1080i/5994 Hz format> Setting of SD-HD V item: 0H 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 2 3 4 5 6 GEN LOCK T ri-level sync signal CCU_VBS/SDI (SD)_OUT CCU_HD_SDI_OUT 90H (HD) LINE CAM_HD_SDI_OUT   T r ...

  • Panasonic AK-HCU200PS - page 18

    18 Setting menu items (Continued) Setting of SD-HD V item: 0H_SD_DLA Y (1FRAM–90H DL Y) 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 2 3 4 5 6 GEN LOCK T ri-level sync signal CCU_VBS/SDI (SD)_OUT CAM_HD_SDI_OUT CCU_HD_SDI_OUT   T ri-level sync signal (1 125/5994/I)  ...

  • Panasonic AK-HCU200PS - page 19

    19 Setting menu items (Continued) Setting of SD-HD V item: ADV ANCE (75H) 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 624 625 1 2 3 4 GEN LOCK T ri-level sync signal CCU_VBS/SDI (SD)_OUT CAM_HD_SDI_OUT 75H (HD) LINE CCU_HD_SDI_OUT   VBS/SDI (SD) signal (626/50/I)   HD ...

  • Panasonic AK-HCU200PS - page 20

    20   BAR ID Screen This menu is used to set the BAR IDs displayed on the color bars Moving the cursor to the “BAR ID” menu title and then pressing the SELECT dial redisplays the OPERA TION menu one level up BAR ID BAR ID SWITCH OFF BRIGHTNESS 100% ID1 POSITION V:00 H:00 ID1 ## ID2 POSITION V:01 H:00 ID2 ## OFFSET V:00 H:00 indicates ...

  • Panasonic AK-HCU200PS - page 21

    21   INCOM/MIC Screen This menu is used for the unit’s intercom settings Configure the camera’s intercom setting on the camera Moving the cursor to the “INCOM/MIC” menu title and then pressing the SELECT dial redisplays the OPERA TION menu one level up INCOM/MIC 4W/RTS IN LEVEL 0dB 4W/RTS OUT LEVEL 0dB RTS CANCEL 0dB GAIN PGM ...

  • Panasonic AK-HCU200PS - page 22

    22   ST ART UP Screen This menu is used to set the control that is performed when the unit’s power is turned on Moving the cursor to the “ST ART UP” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one level up START UP CAM POWER REMOTE VF POWER REMOTE indicates the factory default setting Item Setti ...

  • Panasonic AK-HCU200PS - page 23

    23   NETWORK Screen This menu is used for the network settings Moving the cursor to the “NETWORK” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one level up NETWORK IP ADDRESS 192.168.0.20 SUBNET MASK 255.255.255.0 DEFAULT GATEWAY 192.168.0.1 PORT 80 MAC ADDRESS - - - - - indicates the factory default ...

  • Panasonic AK-HCU200PS - page 24

    24   PM VIEW SETTING Screen This menu is used to set ON or OFF for the items (IRIS, status display) to display on the picture monitor  Moving the cursor to the “PM VIEW SETTING” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one level up PM VIEW SETTING CAMERA NO. ON CAM MODE ON SCENE FILE NO. ON SHUTTE ...

  • Panasonic AK-HCU200PS - page 25

    25   SYSTEM Screen This menu is used to initialize the menu settings Moving the cursor to the “SYSTEM” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one level up SYSTEM INITIALIZE NO? Move the cursor to INITIALIZE, press the SELECT dial, turn the SELECT dial to select “YES?”, and press the SELECT d ...

  • Panasonic AK-HCU200PS - page 26

    26 Web settings Y ou can connect the unit and a computer, and configure various settings from the Web browser screen Use a LAN cable (crossover cable) to directly connect the unit’s LAN connector for computer connections and the computer  Set an IP address for the computer within the private address range while ensuring that it is different ...

  • Panasonic AK-HCU200PS - page 27

    27   Item setting operations (settings) The current settings are displayed on the setting screen When you change a setting and then select the “SET” button on the screen, the new value is reflected on the unit   When a setting has also been changed on the unit, the value that was set last takes priority  In a case like this ...

  • Panasonic AK-HCU200PS - page 28

    28   SETTING2 Screen indicates the factory default setting Item Setting value Remarks FS DELA Y NORMAL SHORT Select the delay mode for the HD return signals NORMAL: Matches return signal input that does not match the sync phase to the phase of the camera by delaying it by 1 frame SHORT : Sets the shortest delay  (5 H) However, if ...

  • Panasonic AK-HCU200PS - page 29

    29   HD/SD PHASE Screen This menu is used for the HD signal and SD signal phase adjustments indicates the factory default setting Item Setting value Remarks HD H PHASE 5994 Hz: –1099 │ 0 │ 1099 Adjust the horizontal sync phase of HDTV output in respect to the sync signals of the system 50 Hz: –1319 │ 0 │ 1319 SD H PHAS ...

  • Panasonic AK-HCU200PS - page 30

    30   BAR ID Screen This menu is used to set the BAR IDs displayed on the color bars indicates the factory default setting Item Setting value Remarks BAR ID SWITCH ON OFF Set the display of the BAR IDs displayed on the color bars when the color bars are displayed to ON or OFF  BRIGHTNESS 0% │ 100% Set the character color , in units ...

  • Panasonic AK-HCU200PS - page 31

    31   INCOM/MIC Screen This menu is used for the unit’s intercom settings Configure the camera’s intercom setting on the camera indicates the factory default setting Item Setting value Remarks 4W/RTS IN LEVEL –400dB │ 0dB │ 200dB Set the input level for the intercom (4-WIRE and RTS) signal (05dB increments) 4W/RT ...

  • Panasonic AK-HCU200PS - page 32

    32   ST ART UP Screen This menu is used to set the control that is performed when the unit’s power is turned on indicates the factory default setting Item Setting value Remarks CAM POWER OFF ON REMOTE Set the control of the camera’s power that is to be performed when the unit’s power is turned on OFF: The camera’s power will ...

  • Panasonic AK-HCU200PS - page 33

    33   NETWORK Screen This screen displays the network addresses   On this screen, the addresses cannot be changed Item Remarks IP ADDRESS Displays the IP address SUBNETMASK Displays the subnet mask DEF AUL T GA TEWA Y Displays the default gateway  PORT Displays the port number MAC ADDRESS Displays the MAC address  ...

  • Panasonic AK-HCU200PS - page 34

    34   PM OPERA TION ST A TUS Screen This menu is used to set ON or OFF for the operation items to display on the picture monitor  indicates the factory default setting Item Setting value Remarks ST A TUS DISPLA Y TIME 0 sec 2 sec 4 sec Set the length of the status display time Set the time in 1-second increments When the status of ...

  • Panasonic AK-HCU200PS - page 35

    35 T able of adjustment setting ranges Names in [ ] apply when menu operations are performed from a computer using a Web browser    OPERA TION menu Menu Item Adjustment setting range Initial value SETTING1 (pages 1 1 and 27) CCU MODE 1080/5994i, 1080/50i 5994 Hz: 1080/5994i 50 Hz: 1080/50i SDI RETURN1 HD, SD HD SDI RETURN2 HD, SD ...

  • Panasonic AK-HCU200PS - page 36

    36 Menu Item Adjustment setting range Initial value INCOM/MIC (pages 21 and 31) 4W/RTS IN LEVEL –400dB to 200dB (05dB increments) 0dB 4W/RTS OUT LEVEL –400dB to 200dB (05dB increments) 0dB RTS CANCEL –400dB to 315dB (05dB increments) Factory setting GAIN PGM 0dB, 20dB 0dB MIC1 LEVEL [MIC LEVEL MIC1] –400dB to 2 ...

  • Panasonic AK-HCU200PS - page 37

    37 Menu Item Adjustment setting range Initial value PM OPERA TION ST A TUS (pages 24 and 34) ST A TUS DISPLA Y TIME 0, 2, 4 [0 sec, 2 sec, 4 sec] 4 [4 sec] MASTER GAIN [MANUAL OPERA TION ST A TUS MASTER GAIN] ON, OFF ON SHUTTER [MANUAL OPERA TION ST A TUS SHUTTER] ON, OFF ON LENS EXTENDER [MANUAL OPERA TION ST A TUS LENS EXT] ON, OFF ON FIL TER [MA ...

  • Panasonic AK-HCU200PS - page 38

    38 Connector pin assignment table [COMMUNICA TION] JBY -25S-1A3F(LF)(SN) (JST  Mfg Co, Ltd) Pin No Signal Flow of signals Remarks 1 INCOM 1 OUT (H) CCU → SYSTEM 0 dBm, 600 Ω (4W)/1 V [p-p] (RTS)   Select “4W” or “RTS” and “INCOM1” or “INCOM2” with the “INCOM switches” on the rear panel [When “R ...

  • Panasonic AK-HCU200PS - page 39

    39 [MIC OUT 1], [MIC OUT 2] HA16RV -3PG(76) (Hirose Electric Co, Ltd) Pin No Signal Flow of signals Remarks 1 SHIELD 0 dBm, 600 Ω 2 HOT CCU → SYSTEM 3 COLD CCU → SYSTEM [MSU] This connector is for future function expansion HR10G-10R-10SC(71) (Hirose Electric Co, Ltd) Pin No Signal Flow of signals 1 CSU CONT (H) CCU → MSU ...

  • Panasonic AK-HCU200PS - page 40

    Index   A ANALOG GAIN Screen  22, 32   B BAR ID Screen ? ...

Fabricante Panasonic Categoría Camera Accessories

Los documentos del dispositivo Panasonic AK-HCU200PS que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Panasonic
- manuales de instrucciones AK-HCU200PS
- hojas de producto Panasonic
- folletos informativos
- o etiquetas energéticas Panasonic AK-HCU200PS
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Panasonic AK-HCU200PS.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Panasonic AK-HCU200PS, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Panasonic AK-HCU200PS. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Panasonic AK-HCU200PS.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Panasonic AK-HCU200PS, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Panasonic AK-HCU200PS. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Panasonic AK-HCU200PS.

El manual de instrucciones completo de Panasonic debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Panasonic AK-HCU200PS - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Panasonic AK-HCU200PS, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Panasonic AK-HCU200PS que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Panasonic AK-HCU200PS - que deben facilitarnos los primeros pasos durante el uso de Panasonic AK-HCU200PS
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Panasonic AK-HCU200PS
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Panasonic AK-HCU200PS en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Panasonic AK-HCU200PS?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Panasonic AK-HCU200PS, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Panasonic AK-HCU200PS probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)