-
Zanussi ZDF 2020 - page 1
EN User manual 2 Dishwasher ZDF2020 ...
-
Zanussi ZDF 2020 - page 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Use of rinse aid _ _ _ ...
-
Zanussi ZDF 2020 - page 3
• Do not change the specifications or modify this prod- uct. Risk of injury and dam age to the applia nce. • Do not use the appliance: – if the main s cable or water hoses are damag ed, – if the control pane l, workto p or plinth area are dam- aged, that you can get acces s to the inn er side of the applia nce. Contact yo ur local Se rvice ...
-
Zanussi ZDF 2020 - page 4
Indicator lights Rinse aid 1) Comes on when it is necessary to fill the rinse aid containe r. Refer to 'Use of rinse aid'. 1) When the salt and/or rinse aid containers are empty, the related indicator lights do not co me on while a washing programme operates. Delay start button Use the delay start button to de lay the start of the washing ...
-
Zanussi ZDF 2020 - page 5
Consumption values Programm e Programme duration (in minutes) Energy consumption (in kWh) Water consumption (in litres) 85-95 1,8-2,0 22-25 105-115 1,5-1,7 23-25 30 0,9 9 130-140 1,0-1,2 14-16 12 0,1 5 The pressure and temperat ure of t he water, t he var- iations of power supply and t he quantity of dishes can change th ese values. Use of the appl ...
-
Zanussi ZDF 2020 - page 6
Water hardnes s Water hardnes s setting °dH °TH mmol/l Clarke manually electronically 15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4 11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3 4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2 < 4 < 7 < 0,7 < 5 1 1) 1 1) 1) No use of salt required. You must set the wa ter softener manually a nd elec- tronically. Manual adjustment ...
-
Zanussi ZDF 2020 - page 7
5 6 It is normal that water overflows from the salt con- tainer when you fill it with salt. Make sure that there is no grain of salt outer of the salt compartment. Salt whic h s tays on the tank for a while drills the tank. It is recomm ended to start a wash - ing programme immediately after you fill the salt con- tainer. This prevents of corros io ...
-
Zanussi ZDF 2020 - page 8
• While you load cutlery and dishes, do these steps : – Load hollow items (e.g. cups, glas ses and pans) with the opening down. – Make sure that water does not collect in the con- tainer or in a deep ba se. – Make s ure that cutlery a nd dishes do no t lie inside one another. – Make sure t hat cutlery and dishes do n ot cover o ther cutle ...
-
Zanussi ZDF 2020 - page 9
Maximum heigh t of the dishes in : upper bask et lower ba sket Upper posit ion 20 cm 31 cm Lower posit ion 24 cm 27 cm 1 2 Do these steps to move the upper basket to the uppe r or lower position: 1. Move the front r unne r stops (A) ou t. 2. Pull the basket out. 3. Put the basket in the upper or lowe r position. 4. Replace t he front run ner st ops ...
-
Zanussi ZDF 2020 - page 10
• rinse ai d • other clea ning agents. Do these step s to use dete rgent tablet s: 1. Make sure tha t the deter gent tablet s are applica ble for your water hardne ss. Refer to the instructions from the manufacturer. 2. Set the lowest leve ls of water hardness and rinse aid dosage. It is not necessary to fill the salt co ntainer and the rinse a ...
-
Zanussi ZDF 2020 - page 11
• The end indicator light comes on. For better drying results, keep the do or ajar for some mi- nutes before you remove the d ishes. Let the dishes cool down be fore you remove them from the applia nce. Hot dishe s are easil y damaged. Removing the load • First remove ite ms from the lower bask et, then from the upper bask et. • There can be ...
-
Zanussi ZDF 2020 - page 12
What to do if… The applian ce does not st art or stops du ring operati on. If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, contact t he Service Force C entre. Caution! Switch off the applia nce before you do the below suggested correctiv e actions. Fault code and ma ...
-
Zanussi ZDF 2020 - page 13
The cleaning results are not satisfactory The dishes ar e not clean • The selected washing prog ramme is not applicable for the type of load and soil. • The baskets are loaded in correctly so that water c annot reach all surfaces. • Spray arms do not turn freely bec aus e of incorrect arrang em ent of the lo ad. • The filters are dirty or n ...
-
Zanussi ZDF 2020 - page 14
Warning! To discard the applia nce, follow the procedure: • Pull the mains plug out of the socket. • Cut off t he mains cable and mains plug and di scard them. • Discard th e door catch. This preven ts the child ren to close thems elves inside the applian ce and endang er their li ves. Installation Warning! Make sure tha t mains plug is disco ...
-
Zanussi ZDF 2020 - page 15
3 4 The internal diameter must no t be smaller than the diam- eter of th e hose. If you con nect the wat er drain hos e to a trap sp igot under the sink, remove the plas tic membrane (A). If you do not remove the membran e, remaining food can cause a block- age in th e drain hose spi got. Caution! Make sure that the wa ter couplings are tight t o p ...
-
Zanussi ZDF 2020 - page 16
To buy accessories, consumables and spare parts at our onl ine shop please visit: www.zanussi.co.uk www.zanuss i.com 156985810-00-052 009 ...
¿Tienes una pregunta acerca de Zanussi ZDF 2020?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Zanussi ZDF 2020, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Zanussi ZDF 2020 probablemente compartirá una forma de solucionarlo.