-
Jensen JTA-475 - page 1
3-SPEED STEREO TURNT ABLE WITH CD AND CASSETTE MU SIC SYSTEM USER MANUAL JT A-475 DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the E ...
-
Jensen JTA-475 - page 2
2 • Start your volume control at a low setting. • Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound l evel: Set the dial and leave it there. Taking a minute to do this now will help to prevent heari ng damage or loss in the future. After all, we wan ...
-
Jensen JTA-475 - page 3
3 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions should be read before the appliance is operated 2. Keep these ins tructions - The safety and operating instructions should be kept for future reference. 3. Heed all warnings - All warnings on the appliance and in the operating instructions should ...
-
Jensen JTA-475 - page 4
4 17. Outdoor Antenna Grounding - If an outs ide antenna is connected to the receiver, be sure the antenna system is grounded so as to prov ide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/ NFPA No.70-1984, provides information with respect to proper grou nding of the mast and ...
-
Jensen JTA-475 - page 5
5 CAUTION Note: This product complies with DHHS Rule 21 Subchapter J at date of manufact u re. Follow the advice below for safe and appropriate operation. ON PROTEC TION AGAINST LA SER ENERGY EXP OSURE o As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. o Stop operation immediately ...
-
Jensen JTA-475 - page 6
6 Should any trouble occur , remove the power source and refer servicing to qualified personnel. PRECAUTION FORE USE • UNP ACK ALL P ARTS AND REMOVE PROTECTIVE MA TERIAL. • DO NOT CON NECT THE UNIT T O THE MAINS BE FORE CHE CKING THE MAI NS VOL T AGE AND ALL OTHER CONNECTIONS HA VE BEEN MAD E. • DO NOT CO VER ANY VENTS AND MAK E SURE THA T TH ...
-
Jensen JTA-475 - page 7
7 (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC Rules. These limits are designed to provi de reasonable protection against harmful interference in ...
-
Jensen JTA-475 - page 8
8 right speaker terminal 2. Connect the left speaker to the left spe ak e r terminals with the red wir e to L+ and the black w i r e to L -. 3. Connect the right speaker to the right speaker termi nals with the red wire to R+ and the black wire to R -. NOTE : Make sure that the power is turned off when connecting or disconnecting the speakers. Make ...
-
Jensen JTA-475 - page 9
9 Remote Control (For CD Operation Only) 16.) DUST COVER 17.) RE PEA T BUTTON 18.) RANDOM BUTTON 19.) POWER ON/OFF BUTTO N 20.) POWER ON LED INDICA T OR 21 .) AM /FM/F M S TER EO BA ND SWITC H 22.) FUNCTION SWITCH 23.) 3.5MM STER EO HEADPHONE JACK 24.) BASS BOOST ON/OFF BUTTON 25.) VOLUME + / - BUTT ON 26.) LED DIAL POINTER 27.) LCD DISPLA Y (FOR C ...
-
Jensen JTA-475 - page 10
10 1) PROGRAM BUTTON 2) REPEA T/RANDOM BUTTON 3) SKIP/SEARCH FORW ARD BUTTON SKIP/SEARCH BACKW ARD BUTTON 4) CD TRA Y OPEN.CLOSE BUTTON 5) PLA Y/P AUSE BUTTON 6) STOP BUTTON 7) VOLUME + / - BUTTON (For CD, T ape, Phono and T uner) BATTERY INSTAL LATION 1.) Open the battery compartment cover. 2.) Insert two "AAA" (UM-4) batteries (included ...
-
Jensen JTA-475 - page 11
11 LISTENING TO THE RADIO 1.) Press down the POWER button to turn the system "On ", power LED indicator ligh ts. 2.) Slide the FUNCTION selector t o the TUNER (Radio) position. 3.) Slide the BAND selector to the desired band, AM, FM or FM STEREO. 4.) Tune to your desired station with the TUNI NG kno b. If FM STEREO mode is selected and yo ...
-
Jensen JTA-475 - page 12
12 from entering the CD me chanism. Never place more than one CD in the CD tra y. If two discs a re loaded at the same time, the CD mechanism may jam and / or the discs the mselves may be damaged. TO BEGIN CD PLAYBACK After you have loaded the CD in the player: 1.) Press the PLAY/PAUSE button to begin playback. The player will begin play b ack ...
-
Jensen JTA-475 - page 13
13 7.) Press the STOP button to stop programmed tracks playback. Press the PLAY/PAUSE button will resume normal playback. NOTE : If you press or SKIP/SEARCH buttons during programmed playback, the player will skip forward or backward to the next track that was programmed, and not to the next track in sequence on the disc that is being played. REPEA ...
-
Jensen JTA-475 - page 14
14 6.) Set the Speed selector to 33, 45 or 78 rpm according to the record you a re pl aying. 7.) Lift the tone arm from the rest and slowly move it over the record. The platter will being to turn. 8.) Move the tone arm to the beginning of the record, or to t he start of a parti cul ar tr ack. Gent ly lo wer the t one ar m ont o th e reco rd t o sta ...
-
Jensen JTA-475 - page 15
15 To avoid damaging the tape, it is recommended to take the cassette tape out of the deck after listening. BASS BOOST Press down the “BASS BOOST” button on the main unit if you want to enhance the bass when listening to the system. Press the button again to turn off bass boost effect. LINE OUT CONNECTION Y ou can connect this unit to your ...
-
Jensen JTA-475 - page 16
16 Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch the t ape surfaces. COMP ACT DI S C CARE Handle the disc only by its edges. Never allow your fingers to come in contact wi th the shiny , unprinted side of the disc. Do not attach adhesive tape, st ickers etc., to the disc label. Clean the disc per ...
-
Jensen JTA-475 - page 17
17 Symptom Possible Proble m Solution AC cord is not plugged into a w all outlet Plug the AC co rd into a wall ou tlet. The u ni t do es no t respond (no power). Wall outlet is n ot functioning. Plug another device into the same outlet to confirm the outlet is wo rking. AM band is too noisy. The reception at the set locat ion is po or . Slightly ro ...
-
Jensen JTA-475 - page 18
18 V ALID IN THE U.S.A ONL Y SPECTRA MERCHANDI SING INTERNA TIONAL, INC. warrants this un it to be free from defective materials or factory workmanship for a p eriod of 90 days fro m the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or tran sferable. Our obli gati on un der ...
¿Tienes una pregunta acerca de Jensen JTA-475?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Jensen JTA-475, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Jensen JTA-475 probablemente compartirá una forma de solucionarlo.