-
Panasonic CS-CE7HKEW - page 1
© 2007 Panasonic HA Air-Con ditioning (M) Sdn . Bhd. (1 1969-T). All rights reserved. Unauthorized copying and distribution is a violation of law . Order No. MAC0801088C2 Air Conditioner Indoor Unit Out door Unit CS-CE7HKEW CU-CE7HKE CS-CE9HKEW CU-CE9HKE CS-CE12HKEW CU-CE12HKE T ABLE OF CONTENTS PA G E PA G E 1 Safety Precautions ----------------- ...
-
Panasonic CS-CE7HKEW - page 2
2 9.2. Outdoor Unit ------------------------------------- ---------- 26 10 Printed Circuit Board ------------------------------------------ 27 10.1. Indoor Unit ------------------------------------------------- 27 10.2. Outdoor Unit ------------------------------------- ---------- 29 1 1 Inst allation Instruction ------------------------------ ---- ...
-
Panasonic CS-CE7HKEW - page 3
3 6. This equipment is strongly recommended to install with Earth Leakage Circuit Breaker (ELCB) or Residual Current D evice (RCD). Otherwise, it may cause electrical shock and fire in case equipment breakdown or insulation breakdown. 7. Use the specified cable and connect tightly for indoor /outdoor connection. Connect tightly and clamp the cable ...
-
Panasonic CS-CE7HKEW - page 4
4 2 S pecifications 2.1. CS-CE7HKEW CU-CE7HKE ITEM UNIT INDOOR UNIT OUTDOOR UNIT Performance T est Condition EUROVENT C O O L I N G Capa city kW 2.05 ( 0.70 ~ 2.40) kCal/h 1760 (600 ~ 2060) EER W/W 4.36 (4.12 ~ 4.14) kCal/hW 3.74 (3.53 ~ 3.55) Noise Level dB (A) High 37, Low 24, QLo 20 High 45 Power level dB High 48, Low 35, QLo 31 58 H E A T I N G ...
-
Panasonic CS-CE7HKEW - page 5
5 1. Cooling capacities are based on indoor temperature of 27 q C D.B. (80 .6 q F D.B.), 19.0 q C W .B. (66.2 q F W .B.) and outdoor air temperature of 35 q C D.B. (95 q F D.B.), 24 q C W .B. (75.2 q F W . B.) 2. Heating capacities are based on i ndoor temperature of 20 q C D.B. (68 q F D.B.) and outdoor air te mperature of 7 q C D.B. (44 .6 q F D. ...
-
Panasonic CS-CE7HKEW - page 6
6 2.2. CS-CE9HKEW CU-CE9HKE ITEM UNIT INDOOR UNIT OUTDOOR UNIT Performance T est Condition EUROVENT C O O L I N G Capacity kW 2.60 (0.80 ~ 3.00) kCal/h 2240 (690 ~ 2580) EER W/W 4.41 (4 .57 ~ 4.00) kCal/hW 3.80 (3.94 ~ 3.44) Noise Level dB (A) High 39, Low 25, QLo 2 0 High 46 Power level dB High 50, Low 36, QLo 31 59 H E A T I N G Capacity kW 3.60 ...
-
Panasonic CS-CE7HKEW - page 7
7 1. Cooling capacities are based on indoor temperature of 27 q C D.B. (80 .6 q F D.B.), 19.0 q C W .B. (66.2 q F W .B.) and outdoor air temperature of 35 q C D.B. (95 q F D.B.), 24 q C W .B. (75.2 q F W . B.) 2. Heating capacities are based on i ndoor temperature of 20 q C D.B. (68 q F D.B.) and outdoor air te mperature of 7 q C D.B. (44 .6 q F D. ...
-
Panasonic CS-CE7HKEW - page 8
8 2.3. CS-CE12HKEW CU-CE12HKE ITEM UN IT INDOOR UNIT OUTDOOR UNIT Performance T est Condition EUROVENT C O O L I N G Capacity kW 3.50 (0.80 ~ 4.00) kCal/h 3010 (690 ~ 3440) EER W/W 3.83 (4.32 ~ 3.39) kCal/hW 3.29 (3.73 ~ 2.92) Noise Level dB (A) High 42, Low 28, QLo 20 High 48 Power level dB High 53, Low 39, QLo 31 61 H E A T I N G Capacity kW 4.80 ...
-
Panasonic CS-CE7HKEW - page 9
9 1. Cooling capacities are based on indoor temperature of 27 q C D.B. (80 .6 q F D.B.), 19.0 q C W .B. (66.2 q F W .B.) and outdoor air temperature of 35 q C D.B. (95 q F D.B.), 24 q C W .B. (75.2 q F W . B.) 2. Heating capacities are based on i ndoor temperature of 20 q C D.B. (68 q F D.B.) and outdoor air te mperature of 7 q C D.B. (44 .6 q F D. ...
-
Panasonic CS-CE7HKEW - page 10
10 2.4. Out door Unit: CU-2E15GBE ...
-
Panasonic CS-CE7HKEW - page 11
11 2.5. Out door Unit: CU-3E18EBE ...
-
Panasonic CS-CE7HKEW - page 12
12 2.6. Out door Unit: CU-3E23CBPG CU-4E27CBPG ...
-
Panasonic CS-CE7HKEW - page 13
13 ...
-
Panasonic CS-CE7HKEW - page 14
14 ...
-
Panasonic CS-CE7HKEW - page 15
15 ...
-
Panasonic CS-CE7HKEW - page 16
16 3F e a t u r e s • Inverter T echno logy - Wider output p ower range - Energy saving - Quick Cooling -Q u i c k H e a t i n g - More precise temperature control • E-ion Air Purifying System with Patrol Sensor - Active e-ions are released to catch dust particles and bring them back the large positively charged fi lter • Environment Protecti ...
-
Panasonic CS-CE7HKEW - page 17
17 • Multi S plit Combination Possibility: - A single outdoor unit enables air co nditioning of up to two separate rooms for CU-2E15GBE, CU-2E1 8CBPG . - A single outdoor unit enables air co nditioning of up to three separate rooms for CU-3E18EBE, CU-3E23CBPG . - A single outdoor unit enabl es air conditioning of up to four separate rooms for CU- ...
-
Panasonic CS-CE7HKEW - page 18
18 4 Location of Controls and Component s 4.1. Indoor Unit 4.2. Out door Unit 4.3. Remote Control ...
-
Panasonic CS-CE7HKEW - page 19
19 5 Dimensions 5.1. Indoor Unit ...
-
Panasonic CS-CE7HKEW - page 20
20 5.2. Out door Unit ...
-
Panasonic CS-CE7HKEW - page 21
21 6 Refrigeration Cycle Diagram If piping length is over common length , additional refrigerant shou ld be added as shown in the table. Model Piping size Rated Length (m) Common Length (m) Max. Elevation (m) Min. Piping Length (m) Max. Piping Length (m) Additional Refrigerant (g/m) Gas Liquid CE7HK, CE9HK, CE12HK 3/8” 1/4” 7.5 7.5 15 3 15 20 ...
-
Panasonic CS-CE7HKEW - page 22
22 7 Block Diagram ...
-
Panasonic CS-CE7HKEW - page 23
23 8 Wiring Connection Diagram 8.1. Indoor Unit ...
-
Panasonic CS-CE7HKEW - page 24
24 8.2. Out door Unit ...
-
Panasonic CS-CE7HKEW - page 25
25 9 Electronic Circuit Diagram 9.1. Indoor Unit ...
-
Panasonic CS-CE7HKEW - page 26
26 9.2. Out door Unit ...
-
Panasonic CS-CE7HKEW - page 27
27 10 Printed Circuit Board 10.1. Indoor Unit 10.1.1. Main Printed Circuit Board ...
-
Panasonic CS-CE7HKEW - page 28
28 10.1.2. Power Printed Circuit Board 10.1.3. Indicator Printed Circuit Board 10.1.4. Patrol Printed Circuit Board ...
-
Panasonic CS-CE7HKEW - page 29
29 10.2. Out door Unit ...
-
Panasonic CS-CE7HKEW - page 30
30 1 1 Inst allation Instruction 1 1.1. Select The Best Location INDOOR UNIT • Do not install the unit in excessive oil fume ar ea such as kitchen, workshop and etc. • There should not be an y heat source or steam near the unit. • There should not be any ob stacles blocking the air circulation. • A place where air circulation in the room is ...
-
Panasonic CS-CE7HKEW - page 31
31 1 1.3. Indoor Unit 1 1.3.1. HOW TO FIX INST ALLA TION PLA TE The mounting wall is strong and solid enough to preve nt it from the vibration. The centre of installation plate should be at more than 450 mm at right and left of the wall. The distance from installation plate edge to ceiling should more than 67 mm. From installation plate left edge t ...
-
Panasonic CS-CE7HKEW - page 32
32 3. For th e embedded piping (This can be used for l eft rear piping and left bottom piping also.) ...
-
Panasonic CS-CE7HKEW - page 33
33 1 1.3.4. CONNECT THE CABLE TO THE INDOOR UNIT 1. The inside and outside connecting cable can be connected without removing the front grille. 2. Connecting cabl e between indo or unit and outdoor unit shall be approved polychlo roprene sheathed 4 u 1.5 mm 2 flexible cord, type designa tion 245 IEC 57 or hea vier cord. • Ensure the colour of wir ...
-
Panasonic CS-CE7HKEW - page 34
34 1 1.4. Out door Unit 1 1.4.1. INST ALL THE OUTDOOR UNIT • After selecting the best location, st art installation according to Indoor/Outdoor Unit Installation Diagram. 1. Fix the unit on concrete or rigid frame firmly and horizontally by bolt nut (ø10 mm). 2. When installing at roof, p lease consider strong w ind and earthquake. Please fasten ...
-
Panasonic CS-CE7HKEW - page 35
35 1 1.4.3. EV ACUA TION OF THE EQUIPMENT WHEN INST ALLING AN AIR CONDITIONER, BE SURE TO EV ACUA TE THE AIR INSIDE THE INDOOR UNIT AND PIPES in the following procedure . 1. Connect a charging hose with a push pin to the Low side of a charging set and the service port of the 3-way valve. • Be sure to connect the end of the charging hose with the ...
-
Panasonic CS-CE7HKEW - page 36
36 4. Cable connection to the power supply through knife switch (Disconnecting means). • C onnect the approved polychloroprene sheathed power supply cable (3 x 1.5 mm 2 ), type designation 245 IEC 57 or heavier cord to the terminal board, and c onnect the other end of the cable to knife switch (Disconnecting means). Note: Knife switch (Disconnect ...
-
Panasonic CS-CE7HKEW - page 37
37 12 Operation Control 12.1. Basic Function Inverter control, which equipped with a mi crocomputer in determining the most suitable operating mode as time passes, automatically adjusts output power for maximum comfort always. In order to achieve the suitable operating mode, th e microcomputer maintains the set temperature by measuri ng the tempera ...
-
Panasonic CS-CE7HKEW - page 38
38 12.1.5. Automatic Operation • This mode can be set using remote control and the operation is decided by re mote control setting temperature, remote control operation mode, indoo r intake air temperature and outdoor air temperature. • During operati on mode judgment, in door fan motor (with sp eed of Lo-) and o utdoor fan motor are runni ng f ...
-
Panasonic CS-CE7HKEW - page 39
39 [Heating] • According to indoor pipe te mperature, automatic heating fa n speed is determined as follows. B. Feedback control • Immediately after the fan motor started, feedback control is performed once every second. • During fan motor on, if fan motor feedback 2550 rpm or < 50 rpm continue for 10 se conds, then fan motor error co unte ...
-
Panasonic CS-CE7HKEW - page 40
40 2. Manual vertical airfl ow direction can be set using remote cont rol; the angles of the vane are as stated above and the po sitio ns of the vane are as Figure 2 below . Whe n the air conditioner is stopped u sing remote control, the vane will shift to close position. 12.4.2. Horizont al Airflow • The horizontal airflow direction lo uvers can ...
-
Panasonic CS-CE7HKEW - page 41
41 2. When quiet operation is stopped, operation is shifted to normal operation with previous setting. 3. When fan speed is changed, qui et operation is shifted to quiet operation of the new fan speed. 4. When operation mode is changed, qui et operation is shifted to quiet operation of the new mode, expect fan only mode. 5. During quiet operation, ...
-
Panasonic CS-CE7HKEW - page 42
42 12.10. Indication Panel Note: • If POWER LED is blinking, the possible op eration of the unit are Hot S tart, during Deice o peration, operation mode judgment, o r ON timer sampling. • If Timer LED is blinking, there is an abnormality operation occurs. • If e-ion LED is blinking, there is an abn ormality of e-ion occurs. • If P A TROL LE ...
-
Panasonic CS-CE7HKEW - page 43
43 c. Patrol operation disable • T o disable the Patrol Operation during unit start (default) with “OFF /ON” button, press “Patrol” button and hold for 5 second s, then release. • T o disable the Patrol Operation, press “Patrol” button and hold for 15 seconds, then release. C. Control Content a. Gas Sensor Control • First 2 minute ...
-
Panasonic CS-CE7HKEW - page 44
44 e. Indicator • When Patrol operation starts, Patrol Sensor indicator ON. • When e-ion operati on starts based on dirtiness level, e-ion indicator ON. g. T imer Co ntrol • When ON timer activates when unit stop s, previous operation resumes without Patro l operation. • When ON timer activates during any operati on, no change and carry on ...
-
Panasonic CS-CE7HKEW - page 45
45 C. Control Content a. Indoor fan cont rol • During any operation mode combines with e-ion operation, fan speed follows resp ective operation mode. • During e-ion individu al operation - only Auto Fan S pe ed and no Powerful opera tion is allowed. Even i f Fan S peed butto n is pressed, no signal is sent to air conditioner , and no change on ...
-
Panasonic CS-CE7HKEW - page 46
46 Error Reset Method • Press “OFF/ON” button to OFF the operation. • Press AUTO OFF/ON button at indoor unit to OFF the operation. • OFF T imer activates. • Press “e-ion” button during e-ion individual mode. • Power supply reset. iii. e-ion breakdown Judgement Method • When hi-feedback voltage (at microcontroller) supplied to f ...
-
Panasonic CS-CE7HKEW - page 47
47 13 Protection Control 13.1. Protection Control For All Operations 13.1.1. Restart Control (T ime Delay Safety Control) • The Compressor will not turn on within 3 minute s from the mome nt operation stops, although the unit is turned on again by pressing OFF/ON button at remote control within this period. • This control is not applicable if t ...
-
Panasonic CS-CE7HKEW - page 48
48 13.1.5. Compressor Overheating Prevention Control • Instructed frequency for compressor ope ration will be regulated by compressor discharge temp erature. The changes of frequency are as below . • If compressor d ischarge temperature exceeds 1 10 q C, compressor will be stop ped, occurs 4 times per 20 minutes, time r LED will be blinking. (? ...
-
Panasonic CS-CE7HKEW - page 49
49 13.1.9. Low Frequency Protection Control 2 • When all the below conditions compl y , the compressor freq uency will chang e to lower frequency . 13.2. Protection Control For Cooling & Sof t Dry Operation 13.2.1. Outdoor Air T emperature Control • The compressor operating freque ncy is regulated in accordance to the outdoor air temperatur ...
-
Panasonic CS-CE7HKEW - page 50
50 13.2.5. Dew Prevention Control 2 • T o prevent dew formation at indoor unit discharge area. • This control starts if all conditions continue for 20 minutes: - Operated with Cool ing or Soft Dry Mode. - Indoor intake temperature is between 25 q C and 29 q C. - Outdoor air temperatu re is less than 30 q C. - Quiet Lo fan speed. • This contro ...
-
Panasonic CS-CE7HKEW - page 51
51 14 Servicing Mode 14.1. Auto OFF/ON Button 1. AUTO OPERA TION MODE The Auto operation will be activated immediately on ce the Auto OFF/ON button is pressed. Th is operation can be used to operate air conditioner with limited function if remote control is mispla ced or malfunction. 2. TEST RUN OPERA TION (FOR PUMP DOWN/SERVICING PURPOSE) The T es ...
-
Panasonic CS-CE7HKEW - page 52
52 • During Remote Control Nu mber Switch Mode, press an y button at remote control to transmit and store the transmission code to the EEPROM. 14.3. Remote Control Button 14.3.1. SET BUTTON • T o check current remote control transmission code - Press for more than 10 seconds. • T o change the air quality sensor sensitivity - Press and re leas ...
-
Panasonic CS-CE7HKEW - page 53
53 15 T roubleshooting Guide 15.1. Refrigeration Cycle System In order to diagnose malfunctions, make sure that there are no electrical problems before inspecting the refrigeration cycle. Such problems include insufficient insulation, problem with the power source, malfuncti on of a compre ssor and a fa n. The normal outlet air temperatu re and pre ...
-
Panasonic CS-CE7HKEW - page 54
54 15.1.1. Relationship between the condition of the air conditioner and pressure and electric current • Carry out the measuremen ts of pressure, electric current, and temperature fifteen minutes after an operation is st arted. Cooling Mode Heating Mode Low Pressure High Pressure Electric current during operating Low Pressure High Pressure Electr ...
-
Panasonic CS-CE7HKEW - page 55
55 15.2. Breakdown Self Diagnosis Function 15.2.1. Self Diagnosis Function (Three Digit s Alphanumeric Code) • Once abnormality has o ccurred during operation, the uni t will stop its operation, and T imer LED blin ks. • Although T imer LED goes off when power supply is turned off, if the unit is operated under a breakdown condition, the LED wi ...
-
Panasonic CS-CE7HKEW - page 56
56 15.3. Error Codes T able Note: “O” - Frequency measured and fan speed fi xed. The memory data of error code is erased when the power supply is cut off, or press the Auto Switch until “beep” sound heard following by pressing the “CHECK” button at Remote Control. Although operation forced to stop when abnormality detected , emergency o ...
-
Panasonic CS-CE7HKEW - page 57
57 16 Disassembly and Assembly Instructions 16.1. Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal Procedures 16.1.1. T o remove front grille 16.1.2. T o remove power electronic controller High voltages are generated in the electrical parts area by the cap acitor. Ensure that the cap acitor has discharged sufficientl y bef ...
-
Panasonic CS-CE7HKEW - page 58
58 16.1.3. T o remove discharge grille ...
-
Panasonic CS-CE7HKEW - page 59
59 16.1.4. T o remove control board 16.1.5. T o remove cross flow fan and indoor fan motor ...
-
Panasonic CS-CE7HKEW - page 60
60 ...
-
Panasonic CS-CE7HKEW - page 61
61 16.2. Out door Electronic Controller Removal Procedure Caution! When handling ele ctronic controller , be careful of electrostatic discharge. 1. Remove the 3 screws of the T op Panel. Fig. 1 2. Remove the 6 screws of the Front Panel. Fig. 2 3. Remove the screw of the T erminal Board Cover . 4. Remove the T op Cover of the Con trol Board by 4 h o ...
-
Panasonic CS-CE7HKEW - page 62
62 17 T echnical Dat a 17.1. Operation Characteristics 17.1.1. CS-CE7HKEW CU-CE7HKE ...
-
Panasonic CS-CE7HKEW - page 63
63 ...
-
Panasonic CS-CE7HKEW - page 64
64 ...
-
Panasonic CS-CE7HKEW - page 65
65 ...
-
Panasonic CS-CE7HKEW - page 66
66 17.1.2. CS-CE9HKEW CU-CE9HKE ...
-
Panasonic CS-CE7HKEW - page 67
67 ...
-
Panasonic CS-CE7HKEW - page 68
68 ...
-
Panasonic CS-CE7HKEW - page 69
69 ...
-
Panasonic CS-CE7HKEW - page 70
70 17.1.3. CS-CE12HKEW CU-CE12HKE ...
-
Panasonic CS-CE7HKEW - page 71
71 ...
-
Panasonic CS-CE7HKEW - page 72
72 ...
-
Panasonic CS-CE7HKEW - page 73
73 ...
-
Panasonic CS-CE7HKEW - page 74
74 17.2. Sensible Cap acity Chart O CS-CE7HKEW CU-CE7HKE O CS-CE9HKEW CU-CE9HKE O CS-CE12HKEW CU-CE12HKE 230V Outdoor T emp. ( q C) Indoor wet bulb temp. 30 35 40 46 T C S H C I PT C S H C I PT C S H C I PT C S H C I P 17.0 q C 2.03 1.54 0.43 1.90 1.48 0.46 1.77 1.42 0 .50 1.61 1.35 0.53 19.0 q C 2.05 0.47 19.5 q C 2.23 1.61 0.44 2.09 1.55 0.47 1.9 ...
-
Panasonic CS-CE7HKEW - page 75
75 18 Exploded V iew and Replacement Part s List 18.1. Indoor Unit Note The above exploded view is for the purpose of parts disassembly and replacement. The non-numbered parts are not kept as standard service parts. ...
-
Panasonic CS-CE7HKEW - page 76
76 (NOTE) • All parts are supplied from PHAAM, Malaysia (V endor Code: 061). • “O” marked parts are recommended to be kept in stock. REF . NO. P ART NAME & DESCRIPTION QTY . CS-CE7HKEW CS-CE9HKEW CS-CE12HKEW REMARKS 1 CHASSY COMPLETE 1 CWD50C1572 mm 2 F AN MOTOR 1 ARW61F8P30AC mm O 3 CROSS FLOW F AN COMPLETE 1 CWH02C 1045 mm 4 BEARING A ...
-
Panasonic CS-CE7HKEW - page 77
77 18.2. Out door Unit Note The above exploded view is for the purpose of parts disassembly and replacement. The non-numbered parts are not kept as standard service parts. ...
-
Panasonic CS-CE7HKEW - page 78
78 (NOTE) • All parts are supplied from PHAAM, Malaysia (V endor Code: 061). • “O” marked parts are recommended to be kept in stock. [PHAAM] Printed in Malaysia SFTK0801-00 REF . NO. P ART NAME & DESCRIPTION QTY . CU-CE7HKE CU-CE9HKE CU-CE12HKE REMARKS 1 C HASSY ASS’Y 1 CWD50K2073 mm 2 SOUND PROOF MA TERIAL 1 CWG302314 mm 3 FAN MOT OR ...
¿Tienes una pregunta acerca de Panasonic CS-CE7HKEW?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Panasonic CS-CE7HKEW, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Panasonic CS-CE7HKEW probablemente compartirá una forma de solucionarlo.