-
Pelco C1917M - page 1
CC4700-2 1/2-Inch Color Camera Installation/ Operation Manual C1917M (12/97) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ® ...
-
Pelco C1917M - page 2
22 Pelco Manual C1917M (12/97) ii CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS ............................... 1 1.2 REGULA TOR Y NOTICES .................................................................. 2 1.3 UNP ACKIN ...
-
Pelco C1917M - page 3
Pelco Manual C1917M (12/97) 23 LIST OF ILLUSTRA TIONS Figur e Page 1 Location of Parts and Controls .......................................................... 4 2 Removal of Camera Cover ................................................................. 5 3 Internal Switch Settings .................................................................... ...
-
Pelco C1917M - page 4
24 Pelco Manual C1917M (12/97) iv (This page intentionally left blank.) ...
-
Pelco C1917M - page 5
Pelco Manual C1917M (12/97) 1 Please thor oughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by Qualified Se ...
-
Pelco C1917M - page 6
2 Pelco Manual C1917M (12/97) 1.2 REGULA TOR Y NOTICES This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipme ...
-
Pelco C1917M - page 7
Pelco Manual C1917M (12/97) 3 2.0 DESCRIPTION The CC4700-2 color video camera has the following features: Imager The camera uses a 1/2-inch CCD (Charge Coupled Device). High Sensitivity The camera gives a clear picture even under very gloomy conditions. CCD Iris Function Even when a manual iris lens is fitted, the sensitivity is automatically adjus ...
-
Pelco C1917M - page 8
4 Pelco Manual C1917M (12/97) 3.0 LOCA TION OF P AR TS AND CONTROLS Figure 1. Location of Parts and Controls MOUNTING SCREW HOLES BACK FOCUS ADJUSTMENT SCREW LENS MOUNT (C-MOUNT) LENS CONNECT OR (4-PIN) POWER INDICA TOR VIDEO OUT CONNECT OR POWER SWITCH GROUND TERMINAL POWER TERMINALS (24 V A C) SYNC SWITCH WHITE BALANCE SWITCH LOCK BUTT ON V -PHAS ...
-
Pelco C1917M - page 9
Pelco Manual C1917M (12/97) 5 4.0 INST ALLA TION 1. Remove the six (6) Phillips screws that hold the upper cover to the camera body and remove the cover (refer to Figure 2). 2. Set the internal switches according to the conditions in which the camera will be used (refer to Figures 2 and 3). Switch Settings AGC ON OFF (gain: 0 dB) CCD IRIS* ON OFF S ...
-
Pelco C1917M - page 10
6 Pelco Manual C1917M (12/97) 3. Replace the upper cover on the camera body . 4. Make sure that you have the right type of lens to install on the camera. The lens must be a C-mount type, and the screw thread must not project more than 9 mm (3/8-inch) from the lens mounting surface (refer to Figure 4). This camera uses a 1/2-inch CCD, so the lens sh ...
-
Pelco C1917M - page 11
Pelco Manual C1917M (12/97) 7 6. When using an auto-iris lens, install it as follows. For a manual iris lens, omit step c. Refer to Figure 6. a. Unscrew the lens mount cap (1). b. Screw in the lens (2). c. Plug in the lens cable (3). Figure 6. Lens Installation Figure 7. Camera Mounting Screw 7. Attach the camera to a mounting bracket with a mounti ...
-
Pelco C1917M - page 12
8 Pelco Manual C1917M (12/97) 8. Connect power to the camera (refer to Figure 8). This camera must always be operated with a 24 V AC class 2 power supply . In the U.S.A., use a power supply that is UL Listed. In Canada, use a power supply that is CSA Certified. Refer to T able A for wiring distances. When using a transformer without a ground lead ( ...
-
Pelco C1917M - page 13
Pelco Manual C1917M (12/97) 9 Wire Gauge Maximum distance from transformer to load T able A. 24 V AC Wiring Distances The following are the recommended maximum distances for 24 V AC applications and are calculated with a 10-percent voltage drop. (10-percent is generally the maxi- mum allowable voltage drop for AC-powered devices.) 20 18 16 14 12 10 ...
-
Pelco C1917M - page 14
10 Pelco Manual C1917M (12/97) 9. Connect a video cable to the VIDEO OUT connector on the camera (refer to Figure 8). Refer to T able B for the type of video coaxial cable to use. 10. Set the SYNC (synchronization) switch. INT (internal): for using the internal synchronizing signal. L.L. (line lock): for locking the camera operation to the supply p ...
-
Pelco C1917M - page 15
Pelco Manual C1917M (12/97) 11 4.1 ADJUSTMENTS T urn on the camera power and make the following adjustments. 4.1.1 White Balance After fitting the lens and making all the installation connections, use a monitor to check the picture and set the white balance as described below (refer to Figure 9). A WB (Automatic White Balance) mode: This mode is ap ...
-
Pelco C1917M - page 16
12 Pelco Manual C1917M (12/97) 4.1.2 V er tical Phase Use the V PHASE (vertical phase) button to compensate for vertical phase discrep- ancies that may occur when two or more cameras are used when the SYNC switch is set to L.L. Use the tip of a ballpoint pen or the like to press the button. Each time it is pressed, the line lock position shifts by ...
-
Pelco C1917M - page 17
Pelco Manual C1917M (12/97) 13 Zoom Lens Models 1. With the camera operating, view an object at least 75 feet away . 2. Make sure the lens iris is wide open. * If outdoors use a neutral density filter in front of the lens to insure that the iris is fully open. 3. Set the lens focus to infinity . 4. Adjust the lens zoom to extreme WIDE angle. 5. Adj ...
-
Pelco C1917M - page 18
14 Pelco Manual C1917M (12/97) 5.0 OPERA TION A void aiming the camera at a very bright object (such as light fixtures) for an ex- tended period. ...
-
Pelco C1917M - page 19
Pelco Manual C1917M (12/97) 15 6.0 TROUBLESHOOTING The following conditions that may be observed when using a CCD camera are not associated with any fault of the camera. V ertical Smear This phenomenon occurs when shooting a very bright object. Patterned Noise and Blemish This is a fixed pattern which may appear over the entire monitor screen when ...
-
Pelco C1917M - page 20
16 Pelco Manual C1917M (12/97) 7.0 MAINTENANCE Be careful not to spill water or other liquids on the unit, or to get combustible or metallic material inside the body . Foreign material inside the camera could cause it to fail or be a cause of fire or electric shock. A void operating or storing the unit in the following locations: Extremely hot or c ...
-
Pelco C1917M - page 21
Pelco Manual C1917M (12/97) 17 8.0 SPECIFICA TIONS Pickup Device: 1/2-inch interline transfer type CCD Effective Picture Elements: 768 (H) x 494 (V) Sensing Area: 6.3 x 4.7 mm (1/4 x 3/16 inch) Lens Mount: C mount Signal system: NTSC standard Scanning System: 525 lines, 2:1 interlace, 30 frames per second Synchronization: Internal or line-lock Hori ...
-
Pelco C1917M - page 22
18 Pelco Manual C1917M (12/97) Dimensions: See Figure 10 Weight: 660 g approx. (1 lb 7 oz) Fuse: 125 VAC, 500 mA (Design and product specifications subject to change without notice.) Figure 10. CC4700-2 Dimension Drawing BA CK FOCUS LENS COLOR VIDEO CAMERA Hi Resolution 6.50 (16.51) 6.12 (15.54) 1.59 (4.04) 2.52 (6.40) 2.23 (5.66) NOTE: VALUES IN P ...
-
Pelco C1917M - page 23
Pelco Manual C1917M (12/97) 19 NOTES ...
-
Pelco C1917M - page 24
20 Pelco Manual C1917M (12/97) Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1997, P elco. All rights reser ved. WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a ...
¿Tienes una pregunta acerca de Pelco C1917M?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pelco C1917M, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pelco C1917M probablemente compartirá una forma de solucionarlo.