-
Roberts Radio RC9907 - page 1
RC9907 3 Band Radio Cassette Recorder Please read this manual before use ROBERT S Sound for Generations Ma in s 54 0 150 60 0 180 160 2 00 80 0 22 0 24 0 100 0 26 0 1 20 0 1 600 kHz kHz MW LW FM 88 94 96 1 00 1 04 1 06 108 MH z A lar m of f Mo de S et 3 Band Ra dio Cassette Re corder with Programmabl e C l ock Al ar m RC 9907 ROBERTS RC9907 Issue 3 ...
-
Roberts Radio RC9907 - page 2
Controls 1. Microphone 2. Headphone socket 3. Volume control 4. Telescopic aerial 5. Operation switch 11. Rewind button 12. Fast forward button 13. Stop/eject button 14. Pause button (Right side) (Top) 1 1 6. Function switch 7. Waveband switch 8. Tuning control 9. Record button 10. Play button 23 4 5 6 7 8 9 10 11 12 13 14 RC9907 Issue 3.pmd 1/26/2 ...
-
Roberts Radio RC9907 - page 3
If you need any further advice, please call our Technical Helpline on :- 0208 758 0338 (Mon-Fri) Controls (Front) 15. Cassette door 16. Set button 17. Mode button 18. Alarm off button 19. Mains indicator 20. Clock display. 2 18 17 16 19 20 15 RC9907 Issue 3.pmd 1/26/2007, 1:35 PM 3 ...
-
Roberts Radio RC9907 - page 4
Battery operation IMPORTANT - The LR6 (AA size battery) must be fitted at all times to provide power for the clock. 1. Remove the Battery cover on the rear of the unit by pushing the catches in the direction of the arrow. 2. Insert one LR6 (AA size) battery into the small space in the battery compartment. The clock display will now appear. The LR6 ...
-
Roberts Radio RC9907 - page 5
If you need any further advice, please call our Technical Helpline on :- 0208 758 0338 (Mon-Fri) IMPORTANT: The mains plug is used as the means of connecting the radio to the mains supply. The mains socket used for the radio must remain accessible during normal use. In order to disconnect the radio from the mains completely, the mains plug should b ...
-
Roberts Radio RC9907 - page 6
5 Medium and long wave operation 1. Ensure that the Operation switch is in the 'Manual' position. 2. Set the Function switch to the 'Radio' position. 3. Select 'MW' or 'LW' using the Waveband switch . 4. Adjust the Volume control until a hissing sound is heard. 5. Carefully tune to the desired station using t ...
-
Roberts Radio RC9907 - page 7
If you need any further advice, please call our Technical Helpline on :- 0208 758 0338 (Mon-Fri) Listening to cassette tapes 1. Ensure that the Operation switch is in the 'Manual' position. 2. Set the Function switch to the 'Tape' position. 3. Press the Stop eject button to open the Cassette compartment . 4. Insert a pre-recorde ...
-
Roberts Radio RC9907 - page 8
7 Recording from the Radio 1. Ensure that the Operation switch is in the 'Manual' position. 2. Set the Function switch to the 'Radio' position. 3. Tune in to the desired station. 4. Adjust the Volume control to suit your requirements. 6. Insert a blank cassette with the tape surface uppermost. 7. Depress the Record button to com ...
-
Roberts Radio RC9907 - page 9
If you need any further advice, please call our Technical Helpline on :- 0208 758 0338 (Mon-Fri) Recording from the Internal Microphone 1. Ensure that the Operation switch is in the 'Manual' position. 2. Set the Function switch to the 'Tape' position. 3. Insert a blank cassette with the tape surface uppermost. 4. Press the Recor ...
-
Roberts Radio RC9907 - page 10
Setting the clock 1. Press the Set button six times, the display will show the hours digit. 2. Press the Mode button until the required hour is displayed. 3. Press the Set button , the display will show the minutes digit. 4. Press the Mode button until the required minute is displayed. 5. Press the Set button to return to the normal clock display. ...
-
Roberts Radio RC9907 - page 11
If you need any further advice, please call our Technical Helpline on :- 0208 758 0338 (Mon-Fri) Setting the date 1. Press the Set button four times, the display will show the months digit. 2. Press the Mode button until the required month is displayed. 3. Press the Set button , the display will show the day of the month digit. 4. Press the Mode bu ...
-
Roberts Radio RC9907 - page 12
Setting the alarm to wake to radio 1. Set the alarm as previously described. 2. Tune in to the desired station, and adjust the volume to the required level. 3. Set the Operation switch to the 'Auto' position. 4. Press the Set button the hours and minutes digits will flash. 5. Repeatedly press the Mode button until the symbol is showing. 6 ...
-
Roberts Radio RC9907 - page 13
If you need any further advice, please call our Technical Helpline on :- 0208 758 0338 (Mon-Fri) Activating the hourly alarm 1. Press the Set button , the hours and minutes digits will flash. 2. Repeatedly press the Mode button until the symbol is showing. 3. Press the Set button three times to return to the normal clock display. 4. Set the Operati ...
-
Roberts Radio RC9907 - page 14
Displaying the alarm time 1. Whilst the current time is displayed press the mode button once. The alarm time stored will be displayed; after approximately two seconds the display will automatically switch back to current time. Displaying the date 1. Whilst the current time is displayed press the Mode button twice. The date will be displayed; after ...
-
Roberts Radio RC9907 - page 15
If you need any further advice, please call our Technical Helpline on :- 0208 758 0338 (Mon-Fri) Play Rewi nd F. Forw a rd Rec ord Stop/E je ct Pause Tuni ng FM MW L W Wav e band Funct ion Op eration Volume Ra dio Auto Buzz Max Min Mi c Phon e s Manual Tape Off Headphones socket A 3.5mm Headphone Socket located on the top of your radio cassette is ...
-
Roberts Radio RC9907 - page 16
15 Cleaning the Heads The binder and oxide from magnetic tapes can accumulate on the pinch roller (A) the capstan shaft (B) and also the heads (C and D). This will impair the sound quality. To clean these parts proceed as follows:- 1. Turn off the power to the unit. 2. Press the Stop/Eject button (3). 3. Press the Play button (6) and the heads will ...
-
Roberts Radio RC9907 - page 17
16 The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. Mains supply The RC9907 will operate from a supply of AC 230 volts, 50Hz only. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power ...
-
Roberts Radio RC9907 - page 18
The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains: AC 230 volts, 50Hz only Batteries: Radio/Cassette 4 x LR14 (C size) Clock Battery 1 x LR6 (AA size) Frequency Coverage FM 87.5 - 108MHz M W 525 - 1610kHz L W 150 - 260kHz Circuit Features Loudspeaker 75mm diameter Output power 700mW Ae ...
-
Roberts Radio RC9907 - page 19
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge. The guarantee does not cover ...
-
Roberts Radio RC9907 - page 20
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 0208 758 0338 (Mon-Fri) Website: http://www.robertsradio.co.uk Issue 3 RC9907 Issue 3.pmd 1/26/2007, 1:35 PM 20 ...
¿Tienes una pregunta acerca de Roberts Radio RC9907?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Roberts Radio RC9907, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Roberts Radio RC9907 probablemente compartirá una forma de solucionarlo.