-
Echo GT-251E - page 1
W ARNING DANGER Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. Grass T rimmer Operator's Manual MODELS G T -2 5 1E X7502021703 X750007973 11/05 ...
-
Echo GT-251E - page 2
2 Copyright© 2005 By Echo, Incorporated All Rights Reserved. I NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operations ...
-
Echo GT-251E - page 3
G RASS T RIMMER O PERA TOR ' S M ANUAL 3 S AFETY MANUAL SAFETY SYMBOLS AND IMPORT ANT INFORMA TION This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to operator and bystanders. IMPORTANT The enclosed message provides information necessary for the protection o ...
-
Echo GT-251E - page 4
4 Physical Condition Your judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the unit. Hand ...
-
Echo GT-251E - page 5
G RASS T RIMMER O PERA TOR ' S M ANUAL 5 Repetitive S tress Injuries -- It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Str ...
-
Echo GT-251E - page 6
6 E MISSION C ONTROL EP A Phase 2 The emission control system for this engine is EM (Engine Modification). Emission Control Label located on Engine (EXAMPLE ONLY, information on label varies by FAMILY). IMPORTANT ENGINE INFORMATION ENGINE FAMILY: 5EHXS.0254ED DISPLACEMENT: 25.4 CC EMISSION COMPLIANCE PERIOD : 300 HRS. THIS ENGINE MEETS U.S. EPA PHA ...
-
Echo GT-251E - page 7
G RASS T RIMMER O PERA TOR ' S M ANUAL 7 D ESCRIPTION Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDER- ING instructions for specific information. 10 1 2 3 4 5 8 9 6 7 ...
-
Echo GT-251E - page 8
8 1. POWER HEAD - Factory Assembled to the Drive Shaft assembly. Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter. 2. GRIP - Rear (right hand) handle. 3. STOP SWITCH - "SLIDE SWITCH" mounted on top of the Throttle Trigger Housing. Move switch FORWARD to RUN, BACK to STOP. 4. FRONT HANDLE - The Front (loop) hand ...
-
Echo GT-251E - page 9
G RASS T RIMMER O PERA TOR ' S M ANUAL 9 C ONTENTS The ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions, installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessary. After opening the carton, check for damage. Immediately notify your re ...
-
Echo GT-251E - page 10
10 NYLON LINE HEAD INST ALLA TION 1 . Remove plastic threaded shaft sleeve from threaded PTO shaft. 2 . Align locating hole in upper plate with hole in bearing housing and insert 5 mm (3/16 in.) diameter locking tool (A). 3 . Place large washer (B) then line head (C) on threaded shaft, followed by small metal washer (D) and locknut (E). 4 . Install ...
-
Echo GT-251E - page 11
G RASS T RIMMER O PERA TOR ' S M ANUAL 11 NYLON LINE INST ALLA TION 1 . Shut engine off. Lay unit on the ground with head assembly up. 2 . Remove old nylon line through center recess of head. 3 . Thread new lines through outside holes (A) in housing until ends meet in center of recess. NOTE Insert cutting line ends to center of head recess to ...
-
Echo GT-251E - page 12
12 o i t a R 1 : 0 5 - x i M l i O o t l e u F . S . UC I R T E M S A GL I OS A GL I O s n o l l a G. z o . l Fr e t i L. c c 1 2 5 6 . 2 2 . 5 3 1 4 8 0 2 0 8 0 6 1 0 0 4 Mixing Instructions 1 . Fill an approved fuel container with half of the required amount of gasoline. 2 . Add the proper amount of 2-stroke oil to gasoline. 3 . Close container a ...
-
Echo GT-251E - page 13
G RASS T RIMMER O PERA TOR ' S M ANUAL 13 ST ARTING COLD ENGINE W ARNING DANGER The attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown. 1. Stop Switch Move stop ...
-
Echo GT-251E - page 14
14 STOPPING ENGINE 1. Throttle Release throttle and allow engine to return to idle before shutting off engine. 2. Stop Switch Move stop switch button (A) backward to STOP position. W ARNING DANGER If engine does not stop when stop switch is moved to STOP position, close choke (B) - COLD START position - to stall engine. Have your ECHO dealer repair ...
-
Echo GT-251E - page 15
G RASS T RIMMER O PERA TOR ' S M ANUAL 15 M AINTENANCE Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To ...
-
Echo GT-251E - page 16
16 AIR FIL TER Level 1. Tools required: 25 or 50 mm (1 or 2 in.) Cleaning brush Parts required: 90008 REPOWER TM Air and Fuel Filter Kit 1 . Close choke (Cold Start Position ( ). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from the air filter area. 2 . Remove the air filter cover. Li ...
-
Echo GT-251E - page 17
G RASS T RIMMER O PERA TOR ' S M ANUAL 17 SP ARK PLUG Level 2. Tools Required: T-Wrench, feeler gauge, soft metal brush Parts Required: REPOWER TM Tune-Up Kit P/N 90074C IMPORTANT Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) other- wise severe engine damage may occur. 1 . Remove spark plug and check for fouling, worn and rounded center e ...
-
Echo GT-251E - page 18
18 1 . Remove spark plug lead (A). 2 . Remove air filter cover (B). 3 . Remove one (1) muffler cover screw and muffler cover (C). 4 . Remove two (2) screw and engine cover (D). IMPORTANT DO NOT use a metal scraper to remove dirt from the cylinder fins. 5 . Use brush to remove dirt from the cylinder fins. 6 . Remove grass and leaves from the grid be ...
-
Echo GT-251E - page 19
G RASS T RIMMER O PERA TOR ' S M ANUAL 19 Cylinder Exhaust Port Level 3. IMPORTANT The cylinder exhaust port must be inspected and cleaned of excess carbon every 3 months or 90 hours of operation in order to maintain this engine within the emissions durability period. ECHO strongly recommends that you return your unit to your ECHO dealer for t ...
-
Echo GT-251E - page 20
20 Before Adjustment Check that: • Air filter is clean and properly installed. • Spark arrestor screen and muffler are free of carbon. • Rapid Loader TM head with (2) new .080 x 8 in. lines is installed. Initial Adjustment 1 . With engine off, turn HI speed screw (C) counterclockwise to stop. 2 . Turn LO speed screw (B) midway between stops. ...
-
Echo GT-251E - page 21
G RASS T RIMMER O PERA TOR ' S M ANUAL 21 A B C LUBRICA TION Level 1. Tools Required: 8 mm Open-end wrench, screwdriver, clean rag Parts Required: ECHO ® LUBE TM 8 oz. (P/N 91014) or Lithium Base Grease 1 . Remove plastic shield. 2 . Loosen bearing housing locating screw (A), at the top of the housing, remove mounting screw (B). 3 . Pull the ...
-
Echo GT-251E - page 22
22 T ROUBLESHOOTING T R A H C G N I T O O H S E L B U O R T M E L B O R P E N I G N E m e l b o r Pk c e h Cs u t a t Se s u a Cy d e m e R e n i g n E - s k n a r c / d r a h s t r a t s t ' n s e o d t r a t s t a l e u F r o t e r u b r a c r o t e r u b r a c t a l e u f o Nd e g g o l c r e n i a r t s l e u F d e g g o l c e n i l l e u ...
-
Echo GT-251E - page 23
G RASS T RIMMER O PERA TOR ' S M ANUAL 23 S TORAGE Long T erm S torage (over 30 days) W ARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result. Do n ...
-
Echo GT-251E - page 24
24 MODEL ----------------------------------------------------- GT-251E Length ------------------------------------------------------- 1,510 mm (59.4 in.) Width -------------------------------------------------------- 315 mm (12.4 in.) Height ------------------------------------------------------- 545 mm (21.5 in.) Weight (dry) w/Cutter Head (GT251E ...
-
Echo GT-251E - page 25
G RASS T RIMMER O PERA TOR ' S M ANUAL 25 NOTES ...
-
Echo GT-251E - page 26
26 NOTES ...
-
Echo GT-251E - page 27
G RASS T RIMMER O PERA TOR ' S M ANUAL 27 NOTES ...
-
Echo GT-251E - page 28
ECHO, INCORPORA TED 400 O AKWOOD R OAD L AKE Z URICH , IL 60047-1564 WWW . ECHO - USA . COM DEALER? Call 1-800-432-ECHO or www .echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 Mon - Fri C.S.T. S ER VICING I NFORMA TION P ARTS / SERIAL NUMBER Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are avai ...
¿Tienes una pregunta acerca de Echo GT-251E?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Echo GT-251E, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Echo GT-251E probablemente compartirá una forma de solucionarlo.