-
Haier A6-707 - page 1
T win-tub Washing Machine User's manual T win-tub Washing Machine User's manual This manual is for Please read this manual carefully before using. Retain it for future reference. ...
-
Haier A6-707 - page 2
Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Names of the parts The cover 2 Packing list Trouble-Shooting Answers to question Specification W ater inlet hose Gland Lint filter Packing list Twin-tub washing machine Name Quantity ...
-
Haier A6-707 - page 3
1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents marked with that ...
-
Haier A6-707 - page 4
2 Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily to ...
-
Haier A6-707 - page 5
3 Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Handicapped or children without care shall no ...
-
Haier A6-707 - page 6
Overflow filter Lint filter If the extra hose is too long, cut it either at point A or B. <10cm B A > 30mm <1.5m 4 Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the p ...
-
Haier A6-707 - page 7
Install the water inlet hose; Select the water level Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Insert the water inlet hose into the water-filling entrance on the control panel directly.(pull it out to dismantle it) Maximum Max. Minimum Min Medium Med Water level indicator Wate ...
-
Haier A6-707 - page 8
Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please mak ...
-
Haier A6-707 - page 9
The capacity of washing and spinning of the machine refer to the weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the standard capacity. the largest capacity is only the loading capacity of the drum The thickness ,size , type of the cloth will ...
-
Haier A6-707 - page 10
STANDARD STANDARD STRONG STRONG DRAIN DRA IN Washing sequence Wash Figure 5 Figure 4 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. 3.Put in the laundries. If the water quantity is insufficient, please ...
-
Haier A6-707 - page 11
Inlet selector Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland 1. Put the laundries into the spin tub evenly and smoothly. 2.Spin (2) Close the inner and outer cover of the spin tub. (3) Spin for 1-2 minutes. 3. Run the foam-removing spinning. (1) Put the glan ...
-
Haier A6-707 - page 12
10 Rinse with stored water Rinse with water-filing 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is few, please use "Soft" current. If you use "Standard" curr ...
-
Haier A6-707 - page 13
1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop ...
-
Haier A6-707 - page 14
After using, please clean the lint and eyewinker of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. T ake off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direction of the arrow ...
-
Haier A6-707 - page 15
Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounting ...
-
Haier A6-707 - page 16
3.in stall th e after cle aning, ins tall it a s or igin as sure it r eliable protective co ver Cleaning the protective cover 2.cl eaning di rty under th e take o ut th e su ndries us ing the pl ier o r ot her wi ry protective co ver Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly ...
-
Haier A6-707 - page 17
T rouble-shooting Answers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do ...
¿Tienes una pregunta acerca de Haier A6-707?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Haier A6-707, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Haier A6-707 probablemente compartirá una forma de solucionarlo.