-
Airlink101 AICN777W - page 1
Quick Installation Guide SkyIPCam777W Wireless MPEG4 Night Vision Pan & Tilt Network Camera Model # AICN777W Ver. 1A ...
-
Airlink101 AICN777W - page 2
This Quick Installation Guide onl y provides basic in structions. For detailed information on using this product, plea se refer to the User’s Manual on the supplied CD. Getting Started Step 1 Connect one end of the Ethernet cable to the IP Camera and con ne ct the other end to one of the LAN po rts on your router o r switch. Step 2 Power on the I ...
-
Airlink101 AICN777W - page 3
Installing the SkyIPCam Utility Step 1 Insert the provided CD and wait for the auto-run screen to appear. Step 2 Click on Install SkyIPCam Utility . Note : If the auto-run screen does not appear a utomatically, go to Start , Run , type: D: UtilitySetup.exe (where D is the letter of your CD drive) and click OK . Section 2 ...
-
Airlink101 AICN777W - page 4
Step 3 Follow the installer instruction by clicki ng Next on the following screens. Step 4 Click Close to complete the installation. ...
-
Airlink101 AICN777W - page 5
Using the SkyIPCam Utility Step 1 Go to Start > (All) Programs > AirLink101 > AirLink101 SkyIPCam Utiliy Step 2 Select the IP Camera you want to c onfigure from the list and click on the Change IP button. Note : If the Camera’s IP address does not sho w up in the window, make sure the camera is properly co n nected to t he same network a ...
-
Airlink101 AICN777W - page 6
Step 3 You may accept the suggested Static IP , or you can man ually change the last 3-digit number of the IP Addres s, in case the suggeste d address is already being used by another device in the same network. Alternat ively, if your router’s DHCP server is enabled, you can sele ct DHCP , and the router will automatically assign a dynamic IP ad ...
-
Airlink101 AICN777W - page 7
Step 5 When you are prompted for the username an d password, enter “admin” for both Us er name and Password , and click OK . Step 6 The camera viewing window will appe ar. Click on Setup , and then cli ck on Smart Wizard . ...
-
Airlink101 AICN777W - page 8
Step 7 If desired, you may change the default Camera Name and enter a name for the Location . Then e nter “admin” for both Admin Password and Confirm Password . Click Next . Step 8 You can change the camera’s IP settings in the belo w window. If you have done this in Step 3, click Next to go to the next step. ...
-
Airlink101 AICN777W - page 9
Step 9 If you would like to set up email alerts that you can receive in the future, enter your email information here. You c an get this information from your email service provider. You can also set this up at a later time. Click Next . Step 10 If you would like to connect the came ra wi relessly to the network, enter the wireless information acco ...
-
Airlink101 AICN777W - page 10
Step 11 Confirm your settings at the la st wi ndow. If everything is correct, click Apply and the configuration is co mpleted. You can now disconnect the RJ-45 cable from the camera to access the camera wirelessly. ...
-
Airlink101 AICN777W - page 11
Viewing Images Method 1 --- Access from “Web Browser” Step 1 If you know the IP address of your network camera, you may open the Web Browser on your computer. Step 2 Type the IP address of your camera (the default IP is 192.168.1.240) in the Address bar, and then press [Enter] . Step 3 Enter “admin” for both the User name and Pass w ord , a ...
-
Airlink101 AICN777W - page 12
Step 4 If it is the first time for your computer to access the Web based viewing page, you may be prompted to install the ActiveX Control. Click on the bar at the top of the screen and click on Install Activ eX Control . Step 5 Click on Install . Once the installation is completed, you may be able to view live images. ...
-
Airlink101 AICN777W - page 13
Step 6 For clearer images, you may simply rotate the camera’s lens clockwi se or counter-clockwise to adj ust the focus. ...
-
Airlink101 AICN777W - page 14
Note: If you are not able to find the pictures or video clip s saved by “Snapshot’ or “Manual Record” under Windo ws Vista , you may also need to disable Internet Explorer’s Protected Mode: Open Internet Explorer and click Tools . Then click Internet Options . Select the Securi ty tab, uncheck the box for protected mode, and click Apply . ...
-
Airlink101 AICN777W - page 15
Method 2 --- Access from “SkyIPCam Utility” Step 1 Go to Start > (All) Programs > AirLink101 > AirLink101 SkyIPCam Utiliy , and open the Airlink101 SkyIPCam Utility. Step 2 Select your camera from the list and cli ck Link Step 3 Follow Step 3 to Step 6 mentioned in Method 1. ...
-
Airlink101 AICN777W - page 16
Technical Support E-mail: support@ airlink101.c om Toll Free: 1-888-746-3238 Website: www.airlink101.com *Theoretical maximum wireless signal rate bas ed on IEEE standard 802.11g spec ifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, ...
¿Tienes una pregunta acerca de Airlink101 AICN777W?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Airlink101 AICN777W, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Airlink101 AICN777W probablemente compartirá una forma de solucionarlo.