-
Metra Electronics 95-7417 - page 1
INST ALLA TION INSTRUCTIONS FOR P ART 95-7417 Cutting T ool • Phillips Screwdriver • Socket Wrench 1-800-221-0932 www .metr aonline.com KIT FEA TURES © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORA TION • DDIN Head Unit Provision • Stac ked ISO DIN Head Unit Provision A) DDIN T rim plate B) DDIN Brackets KIT COMPONENTS T OOLS REQUIRED: 95- ...
-
Metra Electronics 95-7417 - page 2
T ABLE OF CONTENTS 95-7417 Dash Disassembly 1996-1999 Infiniti I-30 ................................................................. 1 1993-1995 Mercur y Villager /1993-1995 Nissan Quest ............... 2 1996-1998 Mercur y Villager/ 1996-1998 Nissan Quest ............... 3 1999-2002 Mercur y Villager /1999-2003 Nissan Quest................ 4 1995 ...
-
Metra Electronics 95-7417 - page 3
95-7417 1 Disconnect the negative batter y terminal to prevent an accidental short circuit. 1 Unclip and remove the shift lever trim panel and remove the (2) screws exposed. 2 1996-1999 INFINITI I-30 Remove (1) screw to the left of the ashtray then unclip and remove the ashtray assembly . 3 Unclip and remove the clock/vent assembly . 4 Remo ve (4) ...
-
Metra Electronics 95-7417 - page 4
95-7417 D ASH DIS ASSEMBL Y 1993-1995 MERCUR Y VILLA GER 1993-1995 NISSAN QUEST Disconnect the negative batter y terminal to prevent an accidental short circuit. Remove (1) screw above the climate controls. 2 Unclip and remove the radio trim panel. 3 Remove (4) screws securing the radio . 4 1 2 ...
-
Metra Electronics 95-7417 - page 5
3 Disconnect the negative batter y terminal to prevent an accidental short circuit. 1 Remove (4) plastic screws and screw anchors from the base of the storage compartment then remove the compartment. 2 Remo ve (2) Phillips screws from above the radio opening . 4 Remove the ashtray . 5 Remo ve (4) screws securing the radio . 6 Remove (2) Phillips sc ...
-
Metra Electronics 95-7417 - page 6
Disconnect the negative batter y terminal to prevent an accidental short circuit. 1 4 95-7417 D ASH DIS ASSEMBL Y Open the ashtray/cupholder assem- bly and depress the retaining clips on eac h side to remo ve . 2 Remove (2) Phillips screws from eac h side of the ashtr ay/cupholder . 3 Unclip the dash trim panel and remove . 5 Remo ve (4) Phillips s ...
-
Metra Electronics 95-7417 - page 7
5 Unclip and remove the dummy plate above the climate controls. 2 Remove (1) Phillips screw from behind dummy plate . 3 Unclip and remove radio trim panel. 4 Remove (4) Phillips screws securing radio . 5 95-7417 D ASH DIS ASSEMBL Y 1995-1999 NISSAN SENTRA 1995-1998 200 S X Disconnect the negative batter y terminal to prevent an accidental short cir ...
-
Metra Electronics 95-7417 - page 8
6 95-7417 1995-1998 NISSAN 240 S X D ASH DIS ASSEMBL Y Disconnect the negative batter y ter- minal to prevent an accidental short circuit. Unclip and remove the climate con- trol trim panel and remove the (2) exposed behind. Unclip and remove the shift lever trim panel and remove the (2) screws exposed behind. 1 2 3 Remo ve the ashtray and (1) Phil ...
-
Metra Electronics 95-7417 - page 9
95-7417 D ASH DIS ASSEMBL Y 1998-2001 NISSAN AL TIMA 7 Disconnect the negative batter y terminal to prevent an accidental short circuit. Unclip the shift lever trim panel and remove (2) Phillips screws at the base of the radio trim panel. 1 2 Remove (2) Phillips screws above the radio opening . 3 1 Unclip and remove the radio trim panel. 4 Remove ( ...
-
Metra Electronics 95-7417 - page 10
95-7417 D ASH DIS ASSEMBL Y 1998-2001 NISSAN FRONTIER 2000-2001 NISSAN XTERRA 8 Disconnect the negative batter y terminal to prevent an accidental short circuit. Remove the ashtray and the (2) Phillips screws exposed in the ashtray ca vity . 1 2 Unclip and remove the r adio trim panel. 3 Remove (4) Phillips screws securing the radio . 4 ...
-
Metra Electronics 95-7417 - page 11
95-7417 D ASH DIS ASSEMBL Y 2002-2004 NISSAN FRONTIER 2002-2004 NISSAN XTERRA 9 Disconnect the negative batter y terminal to prevent an accidental short circuit. Unclip and remove the shift lever trim panel. 1 2 Remove (2) Phillips screws exposed in the shift lever cavity . 3 Remove (2) Phillips screws under the climate control. 4 Unclip and remove ...
-
Metra Electronics 95-7417 - page 12
95-7417 D ASH DIS ASSEMBL Y 1995-1999 NISSAN MAXIMA 10 Disconnect the negative batter y terminal to prevent an accidental short circuit. Unclip the shift lever trim panel. 1 2 Remove the (2) Phillips screws at the base of the radio trim panel. 3 Remove (1) Phillips screw to the left of the ashtray and unclip the ashtray assembly . 4 Unclip and r em ...
-
Metra Electronics 95-7417 - page 13
95-7417 D ASH DIS ASSEMBL Y 2000-2003 NISSAN MAXIMA 11 Disconnect the negative batter y terminal to prevent an accidental short circuit. Unclip and remove the vent/radio trim panel. Note: For Bose systems the vent assembly will be removed without the trim panel. 1 2 Remove the ashtray insert and (1) Phillips screw exposed behind. 3 2 4 5 5 5 5 Uncl ...
-
Metra Electronics 95-7417 - page 14
95-7417 D ASH DIS ASSEMBL Y 1996-2000 NISSAN P A THFINDER/QX4 1997-2000 12 Disconnect the negative batter y terminal to prevent an accidental short circuit. Remove (2) Phillips screws from the base of the radio trim panel. 1 2 Unclip and remove the r adio trim panel. 3 Remove (4) Phillips screws securing radio . 4 ...
-
Metra Electronics 95-7417 - page 15
95-7417 D ASH DIS ASSEMBL Y 2001-2003 NISSAN P A THFINDER 13 Disconnect the negative batter y terminal to prevent an accidental short circuit. Unclip and remove the vent/clock assembly . (Figure A) 1 2 Remove (2) Phillips screws from the top of the radio trim panel then remove the panel. (Figure B) 3 Remove (4) Phillips screws securing radio . (Fig ...
-
Metra Electronics 95-7417 - page 16
14 95-7417 KIT ASSEMBL Y 2 A Attach the factory mounting brackets and the 95-7417 DDIN trim plate/bracket assembly to the DDIN head unit with the screws supplied with the unit. ( Figure B) Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. ( Figure A) 1 B DOUBLE DIN HEAD UNIT PRO VISI ...
-
Metra Electronics 95-7417 - page 17
95-7417 KIT ASSEMBL Y 15 2 A Attach the factory mounting brackets and the 95-7417 DDIN trim plate/bracket assembly to the stacked ISO DIN head units with the scr ews supplied with the units. ( Figure B) Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. ( Figure A) 1 B ST A CKED ISO D ...
-
Metra Electronics 95-7417 - page 18
16 FINAL A SSEMBL Y 1 Locate the factor y wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative batter y terminal and test the uni ...
-
Metra Electronics 95-7417 - page 19
17 95-7417 NOTES ...
-
Metra Electronics 95-7417 - page 20
95-7417 INSTRUCTIONS 1-800-221-0932 www .metr aonline.com REV . 07/28/09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORA TION INST95-7417 ...
¿Tienes una pregunta acerca de Metra Electronics 95-7417?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Metra Electronics 95-7417, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Metra Electronics 95-7417 probablemente compartirá una forma de solucionarlo.