-
Fantom Vacuum FM742H - page 1
REPLACEMENT PAR TS IMPORT ANT SAFETY INSTRUCTIONS NAME OF EACH P ART PREPARA TION BEFORE USE USING THE VACUUM CLEANER USING THE A TTACHMENTS EMPTYING THE DUST COMP ARTMENT CLEANING THE FILTERS CLEARING BLOCKAGES IN THE SUCTION HOSE AND CLEANING THE AGITA TOR ASSEMBLY REPLACEMENT INSTRUCTIONS TROUBLESHOOTING LIMITED WARRANTY Contents 1 3 4 6 8 9 10 ...
-
Fantom Vacuum FM742H - page 2
...
-
Fantom Vacuum FM742H - page 3
IMPORT ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following. READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING - T o reduce the risk of fire, electric shock or injury: 1. Do not leave the vacuum cleaner when plugged in. Unplug it from the outlet when not in use ...
-
Fantom Vacuum FM742H - page 4
16. Do not touch the agitator while it is spinni ng. 17. Do not place any heavy items on top of the vacuum cleaner. 18. Do not step on the hose or pul l it too strongly. 19. Do not pick up items such as pieces of waste paper or cloth wh ich lo oks as though they may cause the hose to become bl ocked. 20. Do not clean or store the vacuum cl eaner in ...
-
Fantom Vacuum FM742H - page 5
Set the O N/OFF switch to " ON " to light the headlight. 3 NAMES OF EACH P ART W ARNING: Operate vacuum cleaner only at the voltage specified on name plate. FRONT REAR Cleaning Utensil Headlight Handle Suction Hose A Dust Compartment Carrying Handle Duster Kno b ON/OFF Switch Release Button A Release Button B Release Button C Suction Hose ...
-
Fantom Vacuum FM742H - page 6
Wa nd Crevice T ool Upholstery T ool & Dusting Brush Hose Cuff Suction Inlet Suction Hose A Caution : Do not connect the power cord plug to the wall outlet until assembly is completed. Attaching the ha ndle PREP ARA TIONS BEFORE USE Attaching th e suction hose A & attachments 4 1 2 Set the vacuum cleaner to the upright position. lnsert the ...
-
Fantom Vacuum FM742H - page 7
1 5 PREP AR A TIONS BEFORE USE W I N D I N G T H E P O W E R C O R D H o o k t h e p o w e r c o r d o v e r t h e c l i p w h i c h i s l o c a t e d o n t h e u p p e r c o r d s t o r a g e h o o k a s s h o w n . 2 Wind the p ower cord around the c or d s t or a g e h o o k s . INSERTING THE POWER CORD PLUG Pl ug S id e Cli p S e c u r e t h e ...
-
Fantom Vacuum FM742H - page 8
Parallel position This position is used for cleaning under furniture. Handle Release Lever Handle Release Lever ON/OFF Switch 6 USING THE V ACUUM CLEANER ON/OFF SWITCH Start or st op vacuum cleaner by pushing on the swi tch. ADJUSTING THE HANDLE Upright po sition The handle is normally locked in this The handle of this vacuum cleaner can be set to ...
-
Fantom Vacuum FM742H - page 9
1 2 RUG/FLOOR (T OOLS)SELECTOR The RUG/FLOOR(TOOLS)selector should only be adjusted while the vacuum cleaner is turned on and in the upright position. When cleaning a rug or carpet,first turn the ON/OFF switch to the ON position,and then set the RUG/ FLOOR(TOOLS)selector to the RUG position. When cleaning a bare floor or when using one of the attac ...
-
Fantom Vacuum FM742H - page 10
Caution: When using one of the attachments during cleaning,set the vacuum cleaner to the upright position. 1 2 3 USING THE A TT ACHMENTS Press the release button C to disconnect the handle from the vacuum cleaner . Remove the attachments from the vacuum cleaner. Caution: When removing the attachments, pull them in the directions shown in the illust ...
-
Fantom Vacuum FM742H - page 11
1 3 2 4 1 2 1 3 2 4 1 2 Trapdoor Projection Groove Release Lever Duster Handle Turn the duster handle several times in the direction shown to empty the dust compartment. EMPTYING THE DUST COMP ARTMENT Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect the power cord from the wall outlet before cleaning. Empty ...
-
Fantom Vacuum FM742H - page 12
Remove the dust compartment.(refer to page 9) Clean the filter fins free of dirt with the forked end of cleaning utensil as shown. Prefilter Dust Compartment Ribs Main Filter 1 1 CLEANING THE FIL TERS 2 Set the dust compartment to the parallel position.Open the trapdoor,then push the release button E and pull out the main filter. 3 Clean the main f ...
-
Fantom Vacuum FM742H - page 13
Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect Cleaning the agitator assembly 1 2 3 CLEARING BLOCKAGES AND CLEANING THE A GIT A T OR ASSEMBL Y the power cord from the wa ll outlet before clearing any blockages in the suction hose and cleaning th e agitator assembly . Cleaning blockages Remove the bottom pl ...
-
Fantom Vacuum FM742H - page 14
REPLACING THE HEADLIGHT LAMP REPLACEMENT INSTRUCTIONS Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below . 1 Set the vacuum cleaner to the parallel position. 2 Loosen the screws to remove the lens. 3 When removing the headlight lamp, be ...
-
Fantom Vacuum FM742H - page 15
Place a new flat belt onto the motor shaft and pulley. 1 2 3 4 5 Bearing Holder Groove Nozzle Head REPLACEMENT INSTRUCTIONS Caution: Be sure to turn the O N/OFF swit ch to the"OFF" position and disconnect the po wer cord fro m the wall outlet before repla cing an y of the parts be low . REPLACING THE FLA T BEL T Remove the bottom plate. ( ...
-
Fantom Vacuum FM742H - page 16
14 2 4 1 3 1 2 3 REPLACEMENT INSTRUCTIONS REMOVING THE BOTT OM PLA TE Set the vacuum cleaner to the parallel position and turn it over . Slide the latch in the direction of the arrow. Remove the bottom plate by pulling the tabs as illustrated. REA TT ACHING THE BOTT OM PLA TE Insert the projection on the bottom plate into the groove on the nozzle h ...
-
Fantom Vacuum FM742H - page 17
Filter Cover 1 1 1 1 2 2 Seal Caution: Be sure that seal on the HEPAfilter is inserted towards the inside of the vacuum cleaner. The filter cover should be correctly oriented when it is reattached. Do not reattach it upside down. 3 Insert a new HEPAfilter with the seal to the inside of the vacuum cleaner. Reattach the filter cover. Caution: Always ...
-
Fantom Vacuum FM742H - page 18
If there is a problem with the vacuum cleaner, carry out the following checks to find the cause. If the problem still persists after the checks have been made, do not use the vacuum cleaner to prevent the possibility of an accident occurring. Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the wall outlet, and ...
-
Fantom Vacuum FM742H - page 19
In US: FANTOM , 94 Main Mill Street, Door 16, Plattsburgh, N.Y . 12901 RETURN TO FANTOM , 94 Main Mill Street, Door 16 , Plattsburgh , N.Y . 12901 OWNERSHIP REGISTR A TION CARD Please fill out and mail the product registration card within ten (10) days of purchase. The registration will enable us to contact you in the unlikely event of a product sa ...
¿Tienes una pregunta acerca de Fantom Vacuum FM742H?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Fantom Vacuum FM742H, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Fantom Vacuum FM742H probablemente compartirá una forma de solucionarlo.