-
Philips AC4004 - page 1
A C4002 A C4004 Register your pr oduct and get suppor t at www .philips.com/w elcome User man ual ...
-
Philips AC4004 - page 2
3 A B C D E F G H I J K L M 12 3 51 1 12 13 14 61 0 9 7 8 4 1 ...
-
Philips AC4004 - page 3
6 Congratulations on your purchase and welcome to Philips! T o fully benet from the suppor t that Philips offers, register your product at www .philips. com/welcome. With this new bedroom air purier you breathe cleaner air . For the best results, place the bedroom air purier in a room where you spend mo ...
-
Philips AC4004 - page 4
SLEEP button with light P ower on/off button with light F AN SPEED button with light F AN SPEED lights (AC4004: 3 lights, A C4002: 2 lights) RESET button for pre-lter RESET button for lter 2 RESET button for lter 3/4 Filter 4: HEP A lter (A C4124) Filter 3: activated carbon lte ...
-
Philips AC4004 - page 5
- Do not place the appliance directly belo w an air conditioner to prevent condensation from dripping onto the appliance . - Make sure all lter s are proper ly installed bef ore you switch on the appliance . - Only use the original Philips lter s specially intended for this appliance. Do not use any other lters. - A void knocking against t ...
-
Philips AC4004 - page 6
1 Place your ngers in the r ecesses of the side panels and gently pull the bottom of the front panel to wards you. Then lift the hooks at the top of the panel out of the top of the appliance. 2 T o remov e the pre-lter , grab the two projections and pull the lter towards y ou. 3 Remove all other lters fr om the appliance. 4 Remove all p ...
-
Philips AC4004 - page 7
6 Put lter 3 (activated carbon lter) back into the appliance. 7 A C4004 only: attach lter 2 (multi-car e lter) to the back of lter 1 (pre-lter). Note: Mak e sure that the front of lter 2 (multi-care lter), that is the side with the tag, points tow ards the pr e-lter . 8 Place lter 1 (pre-lter) in the appliance. Note ...
-
Philips AC4004 - page 8
, The pow er -on light and one of the AIR QU ALITY lights on the control panel g oes on. Colour Air quality Blue ver y good Deep purple good Purple fair Red bad Colour Air quality Blue ...
-
Philips AC4004 - page 9
Note: When the appliance is operating in another mode and you want to activate the auto mode , simply press the AUT O button. , The AUT O light and one of the F AN SPEED lights go on. The F AN SPEED light indicates at which fan speed the appliance is operating. Note: When the air quality is ver y good and the fan speed operates at a very low f an s ...
-
Philips AC4004 - page 10
- When you choose a fan speed man ually (see section ‘Fan speed’ in this chapter). In this case, one of the F AN SPEED lights, the TIMER light and one of the HOUR lights are on. - In combination with the SLEEP mode (see section ‘Sleep mode’ in this chapter). In this case, the SLEEP light and one of the HOUR lights are on (but dimmed). 1 Pre ...
-
Philips AC4004 - page 11
- extra sensitive - sensitive - standard The air quality sensor is set to standard sensitivity . Y ou can adjust the sensitivity of the air quality sensor in the following wa y: 1 If the appliance is already plugged in, unplug the appliance and wait for a fe w minutes. 2 Press and hold the TIMER button and simultaneously put the mains plug in the w ...
-
Philips AC4004 - page 12
- Clean the pre-lter when the lter cleaning light ashes to ensure optimal functioning of the appliance . 1 Unplug the appliance. 2 Place your ngers in the r ecesses of the side panels and gently pull the bottom of the front panel to wards you. Then lift the hooks at the top of the panel out of the top of the appliance. 3 T o remov e the ...
-
Philips AC4004 - page 13
9 T o reattach the fr ont panel, inser t the tw o hooks into the top of the appliance rst (1). Then push the panel against the body of the appliance (2). 10 Put the plug in the wall socket. 11 Press and hold the r eset button for lter 1 (the button below the lter cleaning light) for 2 seconds to r eset the appliance. ? ...
-
Philips AC4004 - page 14
When one of the lter s is almost full and has to be cleaned or replaced, the corresponding light or lights (the pre-lter cleaning light or one of the lter replacement lights together with the ‘REPLA CE FIL TER’ light) star t to ...
-
Philips AC4004 - page 15
Note: The time between the lter replacement signal and the locking of the appliance varies , depending on how often you use the appliance . Note: When the power on/off light, lter replacement light 2 or 3/4 and the ‘REPLA CE FIL TER’ light are on continuously, the appliance is lock ed (see section ‘Filter maintenance’ in this c hapter ...
-
Philips AC4004 - page 16
5 T o remov e lter 3 (activated carbon lter), grab its tag and pull it towards y ou. 6 T o remov e lter 4 (HEP A lter), grab its tag and pull it towards y ou. 7 Discard the lter that has to be r eplaced and unpack the new lter . 8 Put lter 4 (HEP A lter) back into the appliance. Note: Mak e sure that the side with the tag po ...
-
Philips AC4004 - page 17
11 Put lter 1 (pre-lter) back into the appliance. Note: Mak e sure that the side with the two projections points tow ards you. Note: Mak e sure that all hooks are properly attached to the appliance . 12 T o reattach the fr ont panel, inser t the two hooks into the top of the appliance rst (1). Then push the panel against the body of the ap ...
-
Philips AC4004 - page 18
A C4002 comes with the pre-lter , activated carbon lter and the HEP A lter . For this appliance , only the lter cleaning light of lter 1 (pre-lter) and the lter replacement light of lter 3 and 4 (activat ...
-
Philips AC4004 - page 19
Problem Possible solution The appliance doesn’t work. Y ou ignored the lter replacement lights. Y ou did not replace a lter when the corresponding lter replacement light and the REPLACE FIL TER light star ted ashing and did not respond when the appliance star ted to beep ever y 30 minutes after approx. 2 weeks. As a result, the applia ...
-
Philips AC4004 - page 20
Problem Possible solution The appliance still indicates that I need to replace a lter , but I already did. P erhaps you did not reset the appliance. Plug in the appliance , press and hold the reset button corresponding to the lter you ha ve replaced. The appliance beeps if you ha ve reset it proper ly . When I press the SLEEP button, all ligh ...
-
Philips AC4004 - page 21
© 2012 K oninklijke Philips Electronics N.V . All rights reserved. 4222 002 73127 12172 ...
¿Tienes una pregunta acerca de Philips AC4004?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Philips AC4004, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Philips AC4004 probablemente compartirá una forma de solucionarlo.